← Previous lessonFree lesson 2 of 3 · lesson 2 of 61Next lesson →

Unlock all 61 lessons of ManufacturingFull course ₹40,000 · paid

Price & syllabus
Free lesson · 20 min · no payment

Manufacturing Defined: Syringe, Stent and Process Categories

A free lesson from Skill-Lync's Manufacturing course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Module 1 Session 1”

What will you learn in this free Manufacturing lesson?

The instructor defines manufacturing and separates it from joining, fabrication and assembly. The lesson uses the disposable syringe and drug eluting stent as examples, lists material classes, and sorts processes into primary, secondary and tertiary, ending on how metals are extracted from ores.

  • Manufacturing versus joining, fabrication and assembly
  • Syringe and drug eluting stent manufacturing steps
  • Ferrous, non-ferrous, polymer and ceramic materials
  • Primary, secondary and tertiary processes

What comes after lesson 2?

The next free lesson is lesson 3, “Polymer and Ceramic Production and Casting Process Classification” (16 min). Later in Skill-Lync's Manufacturing course (paid): lesson 4, Module 1 Session 3; lesson 5, Module 1 Session 4; lesson 6, Module 2 Demo. The full course has 61 lessons (24 h 37 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Good day to all of you. Welcome to this learning platform or Skill-Lync. And welcome to the course of learning manufacturing process. We will be starting with the module 1, Introduction to Manufacturing Process. So, Table of Contents. What is manufacturing? Primary, secondary and tertiary manufacturing processes. Casting, manufacturing from the liquid state. Metal removal processes and metal forming processes. Manufacturing of polymers, ceramics and composites. Manufacturing defects. Then concepts of safe disposal of manufactured products. Case studies on the simulated studies of the manufactured products. Then finally we understand what we have learned in a taxonomic diagram of BIRD's eye view of week 1 concepts. So, learning objectives are concepts of definition of the manufacturing. Primary, secondary manufacturing processes. Then manufacturing methods of metals from the liquid state. Casting. And manufacturing of material removal processes. Material forming processes. Shaping in the solid average state. And metal forming processes. Otherwise called. Manufacturing methods of non-metallic materials. Polymers, ceramic materials. Then manufacturing methods of composite materials. Safe disposal by recycling or reuse of the manufactured products. Including the scrap. Case studies on the simulation studies for improving the robustness of the manufactured products.

And with this we will move on to manufacturing. And with this we will move on to what is manufacturing. General perspective of manufacturing. The definition being process of converting raw material into semi-finished or finished products. That is the general perspective. Then technological perspective. Application of physical and chemical processes. To alter the geometry. Or properties. To alter the material. To alter the material. To alter the material. To alter the material. To make parts or products. Imparting. Improving the functional characteristics of the product. That is the technological definition. Then economic definition. Transformation of the material into items of greater monetary value. By one or more processing operations. And by our assembly operations. Ultimately the economic definition.

Plays the vital role. Plays the vital role. In as far as designing the process or product. Is economically viable. Is market. It will penetrate the market or not. Or whether it is mandatory. By the government. To go for all these sides upon the definition of the manufacturing. Ultimately making money. In one unit you will be learning about the time value of the money. Where you will really appreciate. The value of the money concept of manufacturing. Then finished or semi-finished product of one manufacturing process. Becomes the raw material of the next process. Or the end user. For example.

We take the button of the shirt. It is the final product for the trailer. Starting material for the trailer. Whereas the final product for the button manufacturers. So this is how the starting material of one product will be the final product for the previous manufacturing process. And so on and so forth. Then comes manufacturing. Joining and assembly and fabrication. These are the terms which many of us will be getting confused. They are interchangeably used as manufacturing. But there is a shuttle difference between joining assembly and fabrication.

A manufactured product. A manufactured product. A manufactured product is either a work in process or a semi-finished product. That means. It is either a finished product. Or some more processes are to be done. That would be the final product for the particular manufacturer. Or it may be lying in his own factory. And which will go for further processing. That is semi-finished product. Or final product. Then finished product of one process. Which will be the starting material for the another process. The button example. We have already understood. There are. There is a subtle difference between manufacturing, joining, fabrication, and assembly.

Manufacturing is by definition converting in the raw material. Then what is joining? When two manufactured products are joined together. For example. Like your ceramic cup. This ceramic cup is made by slip casting. This cup portion is made by one process. This is again made by this same slip casting process. This joining is done by glue. And again. Which is heated at a higher temperature. So that there is a minimum strength. Its own weight bearing strength. And also the weight of the liquid. What we are going to pour. It is going to bear.

This is the. These two are joined. This is joining. So two parts are joined. It is again a manufacturing. We can say it is a manufacturing. But there they are joined. There is a shuttle difference between manufacturing, joining, fabrication, and assembly. Fabrication is nothing but cutting the material, raw material, or finished product, making it small, small pieces, and then joining them. And that is assembly. Also colloquially known as fabrication. So there is a shuttle difference. All the words are used interchangeably for manufacturing. But there is a shuttle difference between the full words.

For example. There are. These terms are interchangeably used. For example. We will go to specific examples of manufactured product. A syringe. Which is used by doctors or nurses. To administer a particular injection to the human body. So it will have a barrel, a plunger. Both are polymers. A hollow needle with a sharp tip. A made up of 316 stainless steel grid. And a safety cap for the needle made of polymer. So these are the manufacturing products. If you see the figure, you will understand. There is a. The disposable syringe. The various parts of the disposable syringe being the barrel, plunger, made of plastic. Polypropylene is a polymer used. Injection molding process is used to make these parts.

To make a needle. Stainless steel 316 grade ingot is made by casting. Again, it is extruded several times. And then finally given a shape of a thin wire. And then wire. There are. Again by. Internal cavities. Hole is created by. Another process. These are the steps involved in. Post finishing. Final assembly process. Inspection. Simulation tests for volume discharge. The most important aspect for the. Once the product is assembled. These 3 are. Plunger. Needle. And the piston. Are manufactured separately. They are assembled. They are assembled. They are assembled to give this final product of a syringe.

And the syringe function is. To deliver. The. Metered quantity of. The drug. So. Another example of manufactured product. We can see is the drug eluting stent. Stents are very small. Meshed. Inserted. With via a balloon catheter. Into a narrowed. Segmented artery. For example. It is heart valve artery. It is blocked. Now. The doctors. What they do. They will take a stent. Stent is nothing but a mesh. Cylindrical mesh. Made up of a stainless steel one. And it is. In the insertion stage. It is. It is collapsed.

And it is. Inside there. Inside the. Stent. A balloon is inserted. Outwards. What they do. Slowly they move on. With the catheter. To the. Blocked artery of the. Blocked artery. Then. They inflate the balloon. Then stent will. Unblock the. Blocked arteries. So now. What. Doctors observed is. Patients. After some. Time. Lapse. Time gap. After inserting the. Drug eluting stent. What they will observe is. It is again. Blocked arteries. Are again coming back. And sitting. Compressing the. Stent. So what they. What they found. Solution was. To smear the.

Stent with a. Drug eluting material. Via. Via. Biopolymer. Having. Porosity. And where the drug is. Smeared with that. Then. It is inserted. So what happens. During. After operation. The. Blocked artery. Try to get compressed. Then. The drug. What they do. It releases the drug. And makes the. Artery. To go back to its position. After some time. Once the drug. Is. Emptied off. Then the drug. This will be. Standing for the. The life expectancy. Of that particular. Drug eluting stents. Maybe around. Seven to eight. Or ten years.

By the time. Usually. People. With the old age. Only will be coming to this problem. So it will. Give them a lifelong. Solution for that. So this is one example. Of the drug eluting. Men's actual product. So inserting the stent. This is the. This is the way. The fixture is. Then post insertion. Follow up. Monitoring of the drug elution. Inserting the stent. Through the balloon. At the blocked artery. Which I already explained to you. Inflation. Inflating the balloon. And ensuring the. Positioning of the inflated stent.

And post insertion. Follow up. By the patient. Reg. Periodically. Then monitoring the drug eluting, drug elution. Then manufacturing step of the drug stent. The chosen Li, the 316 Li is fabricated and outsourced are cylindrical barrel shape and it is wound onto a rod. The mesh is, it is made into a mesh. The mesh is polished with a smooth surface. Polished mesh is inserted, inspected for cracks and other defects because it should be defect-free and should be smooth. Surface should be very, very smooth. And collapsibility and inflatability tests, collapsibility and inflatability tests have to be done.

Coating the polymer containing the required eluting drug is done. Simulating tests for the drug elution, that means periodically squeezing externally. And volume discharged, the drug discharged to find out, monitor. These are the tests done. Finally, in-house approval and general approvals by the appropriate other state government or central government or international like, for example, drug controller in India or FDA in USA. Coming to different steps in manufacturing. Technological view point of view, the manufacturing is ultimately customer's need. Customer is, decides, I want a product like this.

So, customer needs are identified. Identification of the customer needs. Design the product. Taking the design input. And then reviewing the design inputs. Redesigning, designing, redesigning. And approval and freezing of the final design. Once the final design is frozen, then design output is understood. And a selection of the raw materials and manufacturing processing methods are finalized. Then trial production, validation and revalidation has to be done. And finally, final product is given to the customer and customer feedback is taken. That means, any product, customer is this starting point.

End point is also customer. Customer satisfaction feedback is what is the important for the improvement or maintaining the same quality or ultimately improving the quality and bringing innovative products for the customers to purchase in future. Then, the materials one we talked of. What are the materials used? The materials used in the manufacturing processes are ferrous materials containing iron. Non-ferrous materials like aluminum, copper, nickel, cobalt, which are not containing iron. Those are non-ferrous materials. Plastics, again thermoplastics and thermoset polymers. Then, ceramics, which are mostly obtained from the earth, oxides, silica, silicides, carbides, nitrates, etc.

Then, composite materials. It has two phases. One is a continuous phase. Another, discontinuous phase, known as matrix and the reinforcement. Based on the matrix type, polymer matrix composite, metal matrix composite, ceramic matrix composites with varying reinforcements. Which will be understanding in the coming modules. Composite materials. Then, nanomaterials. Very, very fine. 10 to the power of minus 9 is the order of the nanomaterial. Then, amorphous alloys. Metals usually have the crystalline structure. When they are quenched at a very high rate, instead of going to the crystal structure, they will go to amorphous state.

Those alloys are known as amorphous alloys. Then, shape memory alloys. Nickel and titanium. Nitinol. Nickel, titanium and small amount of aluminum with a particular composition cast into ingot. Then, drawn into wires. Wires are again made into springs. These springs, once you expand the spring and the room temperature and boiling the water, if you leave the spring, it will go back to its original shape. That is, it retains its shape. That is why known as shape memory alloys, SMA. These shape memory alloys are used in smart structures.

Then, superconductors. The conductors, all the copper, aluminum, silver, they will have a conductivity, but long amounts of conducting the electricity, they get heated up. What is known as resistance heating, they will get heated up. So, if there is no loss of the charge from one end to the other end, that is, what is what the superconductors will ensure that, room temperature superconductivity is still a reality. Once it is done, it will have its own disruptive technologies. So, your laptop and mobiles will have a very high efficiency in performance.

Next, all materials have structure and then properties, then characterization. So, if you see the triangle, the pyramidal structure, what we have seen, structure, properties, performance, processing, and characterization. These are all the buzzwords which will make the scientists to develop new materials. Technologies to use them for a particular application. Engineers to design engineered products so that science, technology, and engineering will synchronously work for better products. Then, processing, economics of manufacturing, storing, transportation, all these are taken care of in manufacturing. So, now we will understand the primary, secondary, and tertiary manufacturing processes.

So, primary manufacturing processes, forming, or additive, or acetone, or casting and molding are the primary processes, powder metallurgy, rapid prototyping, and deformation processes are metal forming processes, forging, rolling, wire drawing, tube drawing, extrusion. These are all the deformation processes where the shape is only getting changed without any loss of the material. Then, secondary manufacturing processes, then secondary manufacturing processes, or subtractive processes, known as machining processes, that is metal removal processes, conventional machines, machining, turning, milling, grinding, drilling, lapping, etc. Then, advanced machining, non-traditional machining, or unconventional machining processes, where there is no direct contact between the tool and the workpiece.

Whereas, in the conventional machining processes, there is a contact between the workpiece and the tool. Whereas, in the non-traditional machining processes, or new machining processes, where there is no direct contact between the workpiece and the tool, tool is nothing but an abrasive, or a energy, like electrical energy, chemical energy, laser beam, or plasma beam, which you will be understanding in one of the modules, laser beam, etc., for the metal removal processes. But, the metric in conventional machining processes, metal removal is quantity of material removal rate is more, whereas in non-conventional material, it is very, very small.

For example, tertiary manufacturing, as we understood, joining, assembly, and fabrication are interchangeably used with the manufacturing, but there is a shuttle difference, which we understood, joining and fabrication processes are classified, can be classified as a tertiary manufacturing processes. For example, welding, riveting, screwing, brazing, soldering, and gluing, all the operations, which we can classify grossly as tertiary manufacturing processes. Moving on to the next. How metals are extracted? So, metals, how they have formed? Let us understand from the ores itself. Ores are beneficiated. Most metals are formed in the ores as ionic compounds or mixtures with the rock called ores.

These ores are beneficiated, they are mined, open casting, or closed casting, underground. Minerals are processed, liberation, size reduction, and suppression. These are the standard operating procedures for the mineral beneficiation. Then, dewatering, tailings, water recovery, and safe disposal of the tailings is standard procedure by mineral processing engineers, which is followed by them. Then, finally, benefited ore is sent to the plants, that is steel plant. It is smelted. Iron ore smelting is the word where melting as well as reduction takes place simultaneously. That is why the word coined, that is why the word is coined smelting.

Pyro and hydrometallurgy processes are adapted for metal processing. So, metal extraction. Metals are extracted by beneficiation, smelting, hydrometallurgy. Flags and effiline and recovery water are appropriately managed. Then, recovered the values, safe disposal of them is the responsibility of the mineral engineers and also metallurgical engineers. Then, iron is converted into pig iron. Pig iron is the raw material for the steel to steel melting shops. It is been sent to steel melting shops. We spent the last time a few days as itatives painted the Erfahrung. Let go to memory.

But what try and learn the fl amazed researchers like us. In the meantime you are so great.

Want the rest of Manufacturing?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Manufacturing course

The remaining 58 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Manufacturing course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.