Lesson finished
Up next: dBm Power, Base Station Types, Coverage and Mobile Call Flow
Unlock all 33 lessons of Introduction to Cellular Communications 2G-3GFull course ₹40,000 · paid
How a Mobile Network Works: Core, Transport and Cell Site
A free lesson from Skill-Lync's Introduction to Cellular Communications 2G-3G course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 1 Part 2”
What will you learn in this free Introduction to Cellular Communications 2G-3G lesson?
This lesson splits a mobile network into core, distribution and access layers, and lists core functions such as switching, connection management, charging and user databases. It then explains the backbone transport network, RF and microwave frequencies, cell site equipment and antenna connections.
- Access, distribution and core layers
- Core functions: switching, charging, user databases
- RF versus microwave frequency use in telecom
- Cell site: antenna, RRH, baseband, site router
What comes after lesson 2?
The next free lesson is lesson 3, “dBm Power, Base Station Types, Coverage and Mobile Call Flow” (28 min). Later in Skill-Lync's Introduction to Cellular Communications 2G-3G course (paid): lesson 4, Week 1 Session 3; lesson 5, Week 1 Session 4; lesson 6, Week 1 Session 5. The full course has 33 lessons (13 h 14 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Hello and welcome to the first section that is about how a mobile network works. So the agenda of this section is to understand the various components of a mobile network. We will try to find out how a site or you can say the mobile radio site radiates. What are the various electromagnetic frequencies related to the cellular communication or the mobile communication? That is the RF and microwave. We'll try to understand the various site connections and components and how a mobile phone works. We'll try to answer this question.
So if we look at a general mobile network architecture, you can segregate or you can say divide. In fact, you can divide any network architecture into three layers. That is the core layer, the distribution layer and access layer. So if you see the access layer is where the user is situated. So you have the user here and they need some method to access the network. So the access layer primary responsibility is to provide the connectivity to the end user. Be it wired or wireless networks, you will have various defined methods to access the network.
In case of a cellular communication, this access is provided based on the radio frequencies and that's why it is called a radio access network. In case of a wired network, it will be only termed as a access network or wired access network. Then you have the second layer distribution or aggregation layer. So the primary responsibility of this layer is to provide connectivity of the core network to the access network. Now you can have, you can say five to six cores and you can say in one network, but you will have around 100 to 1000 sites.
So you can see you have to connect all these sites to these core network for this, you need to aggregate means data coming from these sites. You need to aggregate and send it to the core network on the reverse direction. So you need to take this data, you need to distribute. So this aggregation and distribution is a main function of the, this layer and in the telecom, we have the mobile packet backbone network or MPBN as the main, you can say component or the technology that performs this function of connectivity of the core network and the LAN network.
Then the last, or you can say the top most layer is the core layer. So the main functionality of the core layer is to manage the users, their authentication, as well as provide services based on the policies and connect to the other networks. So core layer is the main layer where you're switching your routing to the other networks as well as your services are being delivered. So let us try to go a bit deep in these various layers. Now first one is the mobile core network.
Now core network will have two functionalities. So this is a general architecture based on the third generation network. We will see it in detail, but just to give you a brief overview, the mobile core network will have two functionalities. That is the switching and routing of the traffic. Now traffic can be of two types. It can be a circuit switch call or it can be a packet switch. So circuit switch call is basically when you are dialing a number, we call it the voice call or a video call.
Where you have the end to end connectivity. And this is a circuit switch call. Then you have the packet sessions, just like the browsing of internet or any OTT players, just like WhatsApp or you can say you are using Netflix, etc. These are all packet switch space. Now other responsibility of core network is the management of the connection. So MSC is responsible for the management of the connection and for the packet session, we have SGSN and GDSN, which are responsible for the management of the connection of the user.
Then the third functionality is policy and charging. Now the intelligence for the prepaid, postpaid, and then value added services. So these intelligence are part of the core network. Then you have the database of users and equipments. So we have the HLR that is the home location register. EIR equipment identity register and VLR visitor location register. So these are the database of the users that are there in the network. So the functionality of mobile core network can be summarized. It's related to switching and routing of traffic, management of connection, policy and charging, and database of the users.
Now if you go to the mobile packet backbone network or MPBL, it connects the radio access network to the core network. Now we have the radio access network. There are multiple ways you can connect the core network. So we will see it in going ahead. What are the technologies and what were the technologies used in the traditional networks? And what are the various current technologies? So we can use microwave and we can connect it to the IPMPLS network. So IPMPLS network is called the MPBN or the mobile packet backbone network.
Why it's called a backbone network? So just like your backbone in your body, which connects all the nerves to the, your, you can say various parts of the body. Towards the brain, your MPBN is the backbone of the network, which connects to the brain, that is the core network. So you can just take an analogie. The core network is the brain. Radio access network. You can think of them as the fingers or you can think of them skin of your, you can say body. And the MPBN is kind of the nerves as well as the backbone of your body.
So these nerves and the backbone, you can say the underlying transport network, takes the data and forwards it to the brain. So we have various technologies like IPMPLS. So we have various technologies like IPMPLS. So IPMPLS is the MPBN. We can use microwave. We can use the IP routing. We can use the optical transport network. We call it OTN. We can use DWDM. We can use DWDM. So these are the various technologies that we can use. So next is the radio access network. So let us understand the third part of the network that is the radio access network.
Now, so once we have the connectivity from the transport network, we can provide access to the users on the radio waves. We call it radio waves and the component which transforms the transport data in whatever format it is. So we can have multiple technologies as I said, right? We can have microwaves. We can have DWDM. We can have OTN and we can have IP. We can also have ATM. So these are the various transport technologies. So we need a mechanism to transfer this transport data into radio data.
And for this, we have the radio base station. Just like you have a Wi-Fi router, right? Which transforms the IP connectivity or Ethernet connectivity into wireless signals. We have this radio base station. So let us understand what are the various frequencies that the mobile access network or the radio access network will work upon. So this is our electromagnetic spectrum. Now based on the spectrum, you can have from 1 hertz to 10 terahertz. Now there are multiple notations that you will see here. Like we have the notation from ITU, notation from IEEE and then EU, NAT2 and USECM.
So we will just consider the notation from the ITU. So the radio frequency is somewhere between 30 megahertz to around 6 gigahertz. Then we have your microwave frequencies. Also, we have some spectrum which are licensed and unlicensed. So we will see in detail. So you can think of it that the spectrum that is utilized by cellular networks can be categorized into two parts. Radio frequency and microwave frequencies. So let us first understand what is licensed and unlicensed spectrum. So licensed spectrum is allocated by the government.
So in each country, the government has a specified body which will allocate the spectrum. So you would heard about the various spectrum auctions that happen from time to time in your country. And this is basically when the government allocates some block of frequencies to the mobile, you can say, service providers. It is mostly auctioned and the highest bidder will get the specific block of the frequency. Why we have the license spectrum? Because interference can be controlled. Now, you can say, I have the frequency F here in this region.
I would know no other, you can say, no other person or no other entity is allowed to transmit on this frequency. If they are transmitting, it is illegal. By buying this, you can say, block of frequency, the service provider would know that this frequency is allocated to it only, exclusively. And if somebody else, some other person or entity is transmitting in that frequency, that is illegal. So now the example bands are 700 MHz, 900 MHz and 1800 MHz. And the technologies that we have, it's GSM, UMTS and TV broadcasting.
On the other hand, we have the industrial, scientific and medical band of, you can say, spectrum, which is specified for free usage without any license requirement. So, this is mostly for, you can say, the testing as well as for scientific and medical purpose. Now, this is very power limited because it has a lot of interference. We cannot control who is transmitting on this frequency. So, you have your Wi-Fi signal that is on 2.4 GHz or 5.8 GHz. In other words, we cannot control who is transmitting in this frequency and that's why it has a huge interference and thus the cell size or you can say the coverage of these networks is pretty limited.
So, this is the difference between license and unlicensed spectrum. The advantage of license spectrum, as I said, is controlling of interference and in unlicensed, we cannot control the interference and we would see how interference plays a key role in your mobile networks. So, now let's understand what radio frequency is. So, radio frequency range is from 30 MHz to 1 GHz. Now, it has been extended to 6 GHz now and it is suitable for omnidirectional applications. So, omnidirectional applications mean when the antenna is transmitting in all the directions.
So, this is suitable for omnidirectional application and this is very useful in mobile communication because we need to provide the coverage in all the direction. The radio waves carry the information across space to a receiver used in radio broadcasting, television, two-way radios, mobile phones, communication satellites and wireless networking. So, these are the various usage for RF and that's why you would see that this, you can say range 30 MHz to 1 GHz has lot of application in various fields of communication. So, that's why these blocks or you can say these frequencies ranges are being allocated by the government for various applications defined by the various bodies of that country.
Next is microwave frequency. So, microwave frequency is 1 GHz to 60 GHz. Here we have the directional beams possible. Directional beams means that you have antenna here and you have another antenna and you can direct the connectivity in one direction. And it is suitable for point-to-point and microwaves are the main wavelengths used in radar, satellite communication and wireless networking such as Wi-Fi. So, some of this part of the frequency will be used in 5G as well and this is why it is you can say from 1 GHz to 60 GHz and it is mostly for satellite communication and Wi-Fi.
Now, some part of this is also used in your DTH services, direct to home dish services which is in the KU band or around 27 GHz. So, this is the, you can say, various application of the microwave frequencies. Now, the EM spectrum is caused by the EM wave. So, you can see this animation from the electromagnetic wave. We have the electro, that is the electric and the magnetic fields. And as the information traverse through the free space, these electric and magnetic fields are changing and these are always orthogonal to each other.
So, this is how EM waves and EM waves look like. Now, this is the, we call it the air interface and it is mostly comprised by EM waves. Second is the, and the part of the LAN network is the radio base station or the RBS. All right, so, if you have ever looked to a mobile tower, call it cell site tower. So, this cell site tower will have various antennas. So, this is the radio antenna. This is a microwave antenna. And these components behind radios, these are called remote radio head, RRH or RRU, remote radio unit.
So, these are the various components of the, you can say, the various visible components of a cell site tower. However, however, these all components like the antenna, the microwave, and the RRH, we connect to a site rack. In this site rack, we will have various equipments that will process the information from these, you can say, on the top, or you can say, the tower equipment. So, these equipments, or we call the network elements, include a microwave unit that will process the data from the microwave antenna.
Then, we have a base band unit that will process the information from the mobile antenna. And then, we will have a cell site router, so, which will provide the transport connectivity. So, this cell site router is optional. Sometimes, what will happen, your base band will connect directly to the microwave unit. And it will process into a layer 2 networking, I can say, protocols. Now, the cell site router is optional. It's a transport equipment that will process the transport data, and it will connect towards the transport network.
So, let us understand what are the various antenna connections. So, this is your mobile antenna. So, this is from various brands, various companies manufacture this antenna. And, in general, you will have these connectors. So, these are the RF connectors. So, you can see, these are marked in various colors. Like, this one is blue, and this one is red. And it has written here, 790 to 960 MHz. So, this is the operating frequency range for these two ports. So, you will have either two port or four port antennas, depending upon the various configuration.
So, two port antenna can be used for 2x2 MIMO or spatial diversity. And four port antenna can be used for 4x4 MIMO. And we will read about what MIMO is later into the forthcoming slides. But, you can see here, your mobile antenna will at least have two ports for a specific band. So, it will cater to the following frequency, or you can say the following bands, that is 790 to 960 MHz. And this one, you can see here, it's 1710 to 2180 MHz. So, it is written here, 1710 to 2180 MHz.
So, this is the operating frequency band of these two connectors. Alright. So, now these, you can see here, this is the minus 45 degree and plus 45 degree. This is the polarization. Or, these, you can say ports. Alright. And here, you have 2490 to 2690 for this port. And here, you have 2490 to 2690 for this port. So, plus 45 and minus 45, this is the polarization of these ports. Now, these are controlled by a RET. That is the remote electrical tilt. And we would see what tilt is in forthcoming slides.
So, remote electrical tilt is the option to change the antenna and we would see what a tilt means and how it affects the coverage. You have mostly three sectors in an antenna, three or more. So, but to provide a 360 degree coverage, you will have three sectors. And we'll again see how these three sectors provide the coverage into a 360 degree. So, this means one sector will cover 120 degree. Alright. So, then you have various options to connect these antenna. You can connect it to the jumper cable.
That is the RF cable that is connecting from this port to... RRH, that is the radio unit. So, we can connect it to RRH. Alright. From RRH, we can have ECPRI. Our second option is SIPPRI. SIPPRI is common. Let me use a different pen. So, we can use SIPPRI. And SIPPRI is Common Public Radio Interface. So, this interface will help, you know, you can connect RRH to baseband unit. And it is mostly optical SIPPRI. And this is ECPRI, that is Ethernet plus optical. Now, the third option is, this is the jumper cable. This is a coaxial cable.
And we can use this coaxial cable directly from the antenna port towards the radio unit, which is located in near the baseband unit. So, we have the option one as a direct connectivity from the sector antenna towards the radio unit, which is located inside the rack. So, this is inside the rack. Alright. The radio unit. Now, if this radio unit is put near the antenna, we call it remote radio unit. And you can see this is the option two, where we can use the SIPPRI interface to connect remote radio unit or the remote radio head.
And we can use the SIPPRI. And we can have two connectivity options. That is the coaxial cable. That is the, we call it a jumper cable. And the RUT cable. That is used to connect the remote electrical tilt. Third option is, we can use ECPRI. That is the advanced option of SIPPRI, which can be thundered based or optical based. So, you can see the antenna connection here. This is the coaxial cable that we use. We call it a feeder or we call it a jumper. So, these are the coaxial cable. The problem with coaxial cable is it has high VSWR.
Why? Because this is an RF cable. The information travel in coaxial cable in form of EM waves. And when it travels in form of EM waves or we call it the baseband waves, it will have some form of losses. Now, to reduce these losses, the concept was to move the functionality of radio unit. So, radio unit will convert the baseband signal into, or you can say, it will modulate and it will convert it to the higher frequency. So, we have to move this near the antenna. And this will reduce the losses pretty much because the distance is, normal distance of the antenna is 30 meter.
So, we used to have 30 meter of copper based coaxial cable. And this included a lot of losses. So, the idea was to move the radio unit near the antenna. And now, this is 1 to 2 meters only. And it will reduce the problem a lot of VSWR. And this is 1 to 2 meters only. And this is 1 to 2 meters only. And this is an optical interface and electrical interface. So, the information in form of bits. Now, in form of digital information. So, now, this digital information is, you can say, this digital information is connected to the baseband unit. And baseband unit, we have an option called SFP.
We call it small factor plugable interface. Now, what does SFP does? It converts optical to electrical. So, this is the only, you can say, functionality of SFP. It will convert the optical signal into electrical signal. And this baseband unit will transform and process the information. And it will send it to the transport network. Then we have the microwave transport unit, which will connect to the microwave antenna. And this is a, you can say, example of the remote radio unit. And you can see, we have the RF connectors here. And then we have, you can say, RUT cable connector also here. So, this is the complete connection on the antenna that we have.
Now, if we see the antenna radiation pattern, you will see this antenna, there would be a certain tilt. Now, tilt is like your antenna would never be in 90 degrees, because it will not serve the purpose. We have a beam width like this. If you put the antenna in 90 degree, it will be serving in this direction. But we need to serve the population, right? We need to have some downward tilt. So, we have a mechanical tilt, which is fixed. We call it a mechanical tilt because we have tilted the antenna into certain degrees. So, we call it maybe 10 degrees. So, this is the tilt of the antenna.
Now, what it will do? It will just, you can say, transform the main lobe towards the population that we have. And that will have the sector coverage. Now, tilting is a very important factor of, you can say, modifying the coverage. We can also down tilt this coverage by either mechanical or electrical tilt. So, using the electrical tilt, we can down tilt this coverage and it will reduce the sector coverage. Now, this is very important to minimize the interference from the other side. So, suppose we have a site here and it is radiating till here.
Then we can, you know, reduce the coverage of this by down tilting this antenna coverage. So, that's why we have the mechanical tilts and electrical tilts. Now, in the antenna pattern, you will have a back lobe, you have a site lobe. So, suppose you have two antennas here, three antennas here. It will have certain amount of interference because of the back lobe. Now, in the newer generation of antennas, this problem is reduced with advanced antenna technologies. But still, you will have certain back lobes and it will interfere to the, you can say, the co-site antenna that we have.
However, this interference is very minimal because this back lobe is quite small. So, this is the antenna pattern. If you have studied about antenna, you would know we have a back lobe and this is called the directivity. And in this directivity, this is, you can say, the 3 dB coverage area and this is the sector coverage. Now, we can see, based on the type of base station, we can have various types of base station and that transmit radiation over a population. And this is based on the power that we transmit.
Now, the macro base station is having no upper limit, but this is, you can say, regulated by government. So, in each country, there would be some regulations for a mobile tower. What is the maximum, you can say, transmit power at the, we call the effective radiation power. That, what would be the maximum value? So, it is here 46 dBm. So, 46 dBm is kind of the power that we have generally, 249 dBm. But, we don't have any upper limit, but this is the category of macro base station.
So, it should be more than around 40 to 46 dBm. This is the range. But, for the microcell base station, we have a upper limit that is 38 dBm. So, microcell base station would be used into certain, like some malls or business district. So, you can say an university, where you have a high footfall and you have to serve a lower coverage area. Then, you have a picocell. So, picocell is for smaller stadiums or indoor or outdoor areas, where you have a close gathering of people.
And you can have multiple picocells, maybe in a big office as well. And then, you have the femtocells, which are for the home and small offices. So, based on the power, the maximum power is 20 dBm. For femtocells, for picocells, we have the 24 dBm. Now, let us understand the calculation of dBm with respect to watt. So, to convert, dBm is actually dBmW. That is, 0 dB will be 1 mW of power. Now, this is a dB scale. And, why we use the dB scale? Because it makes the power calculation easier.
When we convert to the dB scale, the multiplication in watt scale will become addition. And, division would become subtraction. And, it gives a brief overview. Because, when in terms of power, we are talking about, in terms of, or you can say, the scale is mostly logarithmic. So, this is how it works. So, we have 10 dBm. So, this is the calculation for watt. What is equal to 10 to the power, whatever the dBm we have, minus 30 divided by 10. So, if we take the power value of 0, we will have 10 to the power 0, minus 30 upon 10, 10 to the power minus 3, or 0.00 watt watt.
So, we can get the same power of the carbs. And, first, the extreme augmentation filter, is simply change the variable. So, let me get you. This is 1 mW. So I'll explain you this calculation on whiteboard. So it would be very easy for you to understand.