Lesson finished
Up next: IoT Applications in Smart Homes and Healthcare, and Wireless Links
Unlock all 17 lessons of Internet of Things (IoT) in HealthcareFull course ₹40,000 · paid
Introduction to IoT: Features and Three-Layer Architecture
A free lesson from Skill-Lync's Internet of Things (IoT) in Healthcare course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Module 1 Session 1”
What will you learn in this free Internet of Things (IoT) in Healthcare lesson?
The instructor defines the Internet of Things, using the smartphone's sensors as an everyday example, and lists the features of an IoT system with a heart-monitoring case. He then explains the perception, network and application layers, with middleware selection factors such as scalability, security and privacy.
- Definition of IoT and its basic data flow
- Smartphone sensors as an everyday IoT example
- Perception, network and application layers
- Middleware factors: scalability, privacy, security
What comes after lesson 1?
The next free lesson is lesson 2, “IoT Applications in Smart Homes and Healthcare, and Wireless Links” (55 min). Later in Skill-Lync's Internet of Things (IoT) in Healthcare course (paid): lesson 4, Module 2 Session 1; lesson 5, Module 2 Session 2; lesson 6, Module 2 Session 3. The full course has 17 lessons (9 h 7 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
The topic of the subject to be learned is Internet of Things in Healthcare. The topic covered in this lecture is Introduction to Internet of Things. The Internet of Things, shortly known as IoT, is the interconnection of wide variety of smart devices or sensors that are interconnected and these devices are capable of sensing, processing and making their own decisions without any human intervention. The Internet of Things has wide variety of applications in every aspects of human life. The Internet of Things are widely used in smart home, smart warehouse management, smart cities, smart agriculture, smart traffic management and in smart healthcare.
The IoT in healthcare is very important application which is our subject of study. Before we begin, let us see what is the agenda for this week 1 and session 1 of this course on IoT in healthcare. What follows in week 1, session 1 of the course is the Introduction to IoT, followed by Fundamentals of IoT and then covering the Features of IoT and the Architecture of IoT. Having covered the Basis of IoT, we will see some of the Important Applications of IoT and followed by the Introduction to Application of IoT in Healthcare.
One of the important aspects of IoT is the Communication Technologies and we will be covering the Important Communication Technologies which are used in IoT. The Learning Objectives for this course will be, you will be learning what is Internet of Things, what are the applications of Internet of Things in different sectors, how Internet of Things and technologies communicate with each other. Now having seen what is the topic for our study now, let us take up what is Introduction to IoT. What is Internet of Things? Wikipedia defines Internet of Things as a wireless network between objects, usually the network is wireless and they are self-configuring such as an household appliances.
During the World Summit on Information Society held during 2005, IoT was defined as by embedding short-range mobile transceivers into a wide array of additional gadgets and everyday items. They enable new forms of communication between people and things, they enable new forms of communication between people and things and between the things themselves. To put it in a very simple way, IoT is defined as, it's a network of physical objects or things which have embedded software, electronics, sensors and network connectivity that enables these objects to collect and exchange data.
The Internet of Things consists of smart devices, it can be your devices at home like your smart TV, smart phones, washing machines, it can be your car and they connect to an cloud-based applications and then reporting and analysis is carried out. From the smart devices, the data is communicated to the gateway, then to the cloud-based applications, then the reporting and analysis are being carried out. That is how the IoT basic architecture looks like. Now let us see what is Internet of Things is about. To take a classic example of a smartphone which is used by everyone in everyday's life, the mobile phone was invented with the basic idea of having connectivity while on the move rather than being connected always with your fixed lines.
And now you can see that you are not only inside the house, you are always able to move around and then have the communication. The mobile phones have got number of applications and functionalities other than its basic function of voice and data communication. The mobile phones have got GPS-based tracking, they have accelerometer sensors, gyroscopes for your health monitoring. They can even calculate how much of energy you have expended, what amounts of calories you have burnt and how many number of steps you have taken for the day and what is the distance covered.
And there are also number of applications, third-party applications added, where you can monitor your health statuses also. All this health data is collected over a period of time and there are software applications which plot the trends and then they give you the status over an extended period of time. Also, the smartphones have got some sensors built inside them, for example, if you go to a high-lit area wherein the backlit of your phone automatically adjusts the backlit light to the ambient conditions also. Suppose you come to a dark area, the backlit is lightened brighter so that you can read the phone very easily.
Also, the mobile phones have got number of sensors for the security reasons like the biometric sensors, face recognition and voice sensors, which has got enhanced features in the phone in terms of the security. The mobile phones also have got efficient battery management system. When a battery energy is very low, they adaptively change over to low power mode and also it will lower the brightness of the phone and the screen and all the power-consuming applications are turned off. The mobile phones are also used very commonly for the car navigation with voice assistance, providing you alternate routes, information on the traffic ahead of you and the conditions where you are and how an alternate route can be taken so that you can reach your destination at a very short time.
You can see that your basic mobile phone has got a number of applications built in and it's a very smart device. This is what is Internet of Things is about. You can see that there is electronics, there is an embedded software and there are a number of sensors interfaced into your phone and there are a number of applications that collect and then they analyze the data and they are continuously communicating to the cloud for storage and analysis and waiting for a command to be executed. Now, let us see why Internet of Things is required.
Basically, you can see that Internet of Things is expanding and it is making the human interdependent to interact, contribute and collaborate with the things around them and we can create a better and a proper Internet of Things of environment around us. That's why IoT is being required. Now, what are the benefits you are going to gain out of IoT? Now, the most important benefit which you are going to gain by the use of IoT is efficient utilization of resources. Say, if I have a smart system, for example, a smart home that can connect to all the resources to a common platform and if I can interact with each other and if I have a common computational power and also understanding the functionalities of the system and the resources, I can manage them very efficiently.
These resources can be in terms of power savings, timely switching on or switching off a device, avoiding peak power traffic hours, managing the groceries in the fridge or in the home. I can maintain an ambient temperature at home before I can leave or I can come home and then I can control all these devices. The next benefit I am going to gain is by this use of IoT is my efforts are going to be minimized everywhere. You can see the human efforts are coming down everywhere.
The return on investment which I am going to gain by investing in IoT is going to be very huge in terms of monetary gain. I am going to save lot of my time and the resources you see that I am going to very efficiently utilize them. That is why IoT is becoming very popular now. Since the human efforts and interventions are being minimized, it saves lot of time for me. If the resources are going to be utilized very efficiently, then I save lot of time which I can productively use it on any other important assignments which I have in hand.
Suppose if I build an artificial intelligence platform with a cloud computing where all my end devices are going to be effectively and efficiently controlled and maintained and there is no going to be any human intervention into this system. The other benefit I am going to bring out is on the security of these devices. The data, the data security, the device security is going to be increased multifold as well. The other important aspect of Internet of Things is, is in the health of the devices are going to be monitored continuously and the performance of the devices are going to be monitored and in case a device is going to come to a stage where it is going to fail in the near future, it can be easily predicted by the health of the devices and we can take in any preventive actions that are going to be required and you can send the device for the maintenance as well.
Having seen a number of benefits that we are going to gain by the use of Internet of Things, now let us see what are the basic components of IoT. The basic components of IoT are, the first component is the end device which we call it as a node also. These are the basic units, they are the sensors that interact with the environment, and they are responsible for collecting the data. All the sensors in the IoT is required to be under a common platform so that they can communicate each other.
The second unit is the gateway or it is also called as the local processing nodes. The sensors send the raw data to the gateways and in this gateway the data is processed to some level and they are stored locally. Then you can see the third component is the cloud where the data is required to be transmitted to the cloud. There are a number of communication technologies which can be used in IoT. It can be wired or wireless technologies and we will be covering them in the future classes.
The fourth component is the cloud-based application where we are going to have the storage also being carried out, analysis is going to be carried out and reporting is going to be done. From the analysis, the events are generated and communicated back to the sensors or the devices. The events are also stored in the cloud for any future requirements. Having covered the basis of Internet of Things, let me give you an overview of IoT covering their life cycle, the futures and their generic architectures. First of all, we are going to have the solution to some cell phones.
Let me show you how to check the system of IoT. Since then, we will see the solution of LOC, the new cloud-based application of the Internet of Things. Let me show you how to check the system of IoT, The life cycle of IoT consists of Collect, Communicate, Analyze, and Act. These are the various stages. The sensors and devices collect the data. Based on the application, the IoT is designed for, like it can be for a home-based application, it can be for healthcare, or it can be an industry or a manufacturing plant.
The sensors will collect the data accordingly. The raw data acquired by these sensors are minimally processed, and they are going to be pushed to the next layer. The acquired sensor data or events are required to be communicated. Here the acquired data and events are transmitted through a network to the destination. The network can be a cloud, or it can be a private network, it can be an hospital network, or it can be an home network also. The next stage is the analysis. From the data collected, we need to carry out analysis, and we need to derive out what is the information we are going to get out from the raw data which we have received from the sensors.
And the analysis are carried out, and then the analysis data is going to be sent to the further stages for acting on that. What are the different types of analysis which are carried out are processing, visualization, you can filter out some of the data which is not required, you can take out the important information or events, and what report the data, and then you are going to carry out the interpretation. Now from this analysis station, it is going to be sent to the next stage, which is the act.
Here the actions are going to be based on the information which we have derived from the data what we received from the sensor. The action is required to be communicated to the sensor, device, user, or user service provided either by mail, or it can be an SMS, or it can be an text, or it can be in the form of an alert, or it can be communicated or talked to another system also. Now let us see what are the major features of IoT. IoT is capable of leading the other technologies available to reach its complete potential and capabilities.
The features of IoT are connect, analyze, and integrate. The first feature is the connect feature. The connect feature connects various things to the IoT platform. It can be sensors or devices. The second feature is the analyze. This carries out analysis of the data, of various data which are collected from the sensors, and it is going to build an intelligence. The third feature is the integrate feature. It integrates various models to improve the user requirements. The three main different aspects of how IoT works are. The first aspect is connect aspect.
Here we are defining how the devices are going to connect or establish connectivity to the IoT platform. So here we see that second aspect will be discussing on how the analysis of the data is carried out. How the data is going to be analyzed to build an intelligence to the system. The next module will be your integration module, which carries out integration and how we are going to improve the user requirements or the user's experience of using the system. For example, if you take your fridge at your home, that is a basic sensor.
That sensor is going to have various functionalities. It is going to be smart. It is going to know what all the items which are kept in the fridge, when the items were purchased, what is the expiry date, and how much of items have been consumed. And then in case the items are going to be used and if it's not available for the next use, it is going to order it automatically either through an online store or it can be through any other applications. The items are going to be again received and then placed into the smart fridge.
Now let us take each one of these features and then discuss them in detail. The first feature is the connect. Now let's take the connect feature. The first in the connect is the device virtualization that is present on the network. It can be on the server, it can be on the internet or it can be on the cloud also. The devices are important component of the IoT because they are the basic unit and they connect to a common platform. Since they are required to connect to a common platform, it is always necessary to ensure that these devices should meet certain levels of standards so that the commonality is there among the devices and you can establish connectivity among all these devices.
For example, if you are designing a smart home, where there is a need to have a control of all these devices like your air conditioners, lights, washing machines, dishwashers, your microwave ovens. These devices are required to be controlled remotely using an application. These devices are required to use some standard switches so that they can be controlled automatically from the remote. Next aspect is the high-speed messaging. These devices are connected in the IoT platform which will be generating numerous messages and data. These messages and data are required to be communicated to the cloud.
There is a need for an highly reliable secure and bi-directional exchange of data and messages between these devices and the cloud. Here the communication channel is essentially required to be bi-directional so that the exchange of data is two-way and it has to be faster and the status of the device is to be known well. There is a little in the platform and the commands and controls can be exchanged very easily. The next aspect in this IoT feature of connect is the endpoint management. Here we manage the end device and we maintain an identity.
The metadata and the life cycles states of all these devices are going to be managed here. The next IoT feature is the analyze feature. The first thing that is carried out is the stream processing here. where the real-time analysis of the incoming streams with aggregation, filtering and correlation will be carried out. Here we are dealing with real-time availability of data for processing and analysis. Any delay in the availability of data in real-time may lead to system failure in IoT. The availability of data in real-time is very important in critical complications like your healthcare applications.
In case the sensor is going to detect some kind of an abnormality in the health parameters. And if that data is not made available timely to an hospital for any diagnosis or any further courses of action. Then it will be leading to a life-threatening situation. Then this system will be considered as a failed or a failure of the system. The next important aspect of the analysis is the data enrichment. From the devices, there are large amount of raw data which are being received. From this large amount of data received, it is necessary to identify what is contextually important information and that can be extracted and can be used for further analysis and generation of commands or events.
The next event is the store where there is a large amount of data generated and they are going to be analyzed and number of events are going to be generated. These events are required to be stored in the platform. For example, in an IoT for healthcare application where we are going to monitor 12 leads of ECG signal from a patient from home and it is going to be continuously monitored. We see here that large amount of data will be generated. From these 12 leads of ECG signal, you can try to derive what is the heart rate variability and you can try to derive out any arrhythmias which are going to happen either by use of heart rate variability analysis or you can carry out some pattern recognition techniques.
These events and abnormalities which are called arrhythmias are going to be stored and they are going to be communicated to the hospital along with the process data for an expert to review them and in case any treatment is going to be given immediately. The patient can be called to the hospital and the treatment can be provided to the patient immediately. The next feature of the IoT is the Integrate feature. The Integrate feature consists of enterprise connectivity, APIs and command and control. For example, the enterprise connectivity dynamically dispatches the critical data and events to the application and to the process flow.
The APIs carried out the integration and the cloud-based applications and devices using the API. For example, representational state transfer APIs are very commonly used. The command and control has capability to send messages to devices from the enterprise and the mobile applications independent of the device connectivity. The third feature of IoT is connectivity to a service provider. For example, if there is an observed abnormal heart rate or an arrhythmia detected, then there is a need to communicate to an emergency healthcare service provider or to an expert doctor or to the hospital or it can be even to a 911 service so that they can act quickly and they can dispatch a team with emergency medication and ambulance so that the patient when he is being transported via an ambulance, the parameters are also continuously monitored in the hospital and the hospital can keep the ICU or the OT ready when the patient arrives so that there is no time wasted.
Having covered the features of IoT in detail, now let us take up the architecture of IoT. If you see, there is no single architecture which is meant for IoT. Then there is no single commonly available architecture which has been made available for any of these IoT applications because each one of the manufacturing firm has their own design based on their requirement and also based on their standards and also based on the user requirements the applications are built and also many of the applications the requirements are built based on the application what it is going to be intended whether it is for generic application or it is going to be for medical applications.
If you take the architecture of the IoT, it consists of three layers, the perception layer, the network layer and the application layer. layer gathers information or data from the environment and the data is passed on to the network layer. The network layer is responsible for transferring the data from the sensor to the application layer. The application layer delivers the data to the end user or to the end platform. So we can see here the perception layer is the first layer where the sensors are located. The sensors will sense and gather the information about the environment.
The flyer is used when the-on connection may be located under the environment and now gives it an environmental Tears There is a powerous environment for natural data that can be displayed along the micro einfachs And so now we can get the power left here by thinking of what the first time we can Dur проис They sense the physical parameters and then they identify what type of parameters are going to be sensed and identifies the other objects in the environment and the data is going to be communicated to the network layer.
The network layer is responsible for connecting devices, smart things and servers and they are responsible for transmitting and processing of the sensor data which has been received from the perception layer. And they are also responsible for receiving command and control from the platform. In the application layer, they are responsible for the application specific services to the user. The applications for IoT can be deployed or can be defined in this application layer. The architecture also can be expanded as a file layer architecture. The layers and its functions remains the same except that the difference comes from the processing layer, the transport layer and the business layer are added.
The perception layer senses the input from the sensors and provides the digitized data to the transport layer. The transport layer transfers the sensor data to the processing layer. The data transfer can be through any network such as it can be your wireless networks. The mostly common used wireless networks are Bluetooth, ZigBee, RFID, 3G or 4G and the near field communications. The processing layer will process, analyze, store large volumes of data. The processing layer employs big data analysis, cloud computing, artificial intelligence to process and analyze the data.
The information is then passed on to the application layer. The application layer is responsible for delivering application specific services to the users. On top of all, this is the business layer. A business layer is where there are devices which are used in large scales. The business layer will monitor the complete functions of the IoT system, including the applications, the business model, what we are into, what is the profit, and how is the privacy of the user and the data is going to be maintained or how they are going to be processed.
Now, let us see what is cloud computing in IoT. The information from the sensors are collected and they are passed on to the cloud platform. The cloud platform will process all the data and has various applications to deal with the data. The cloud computing can be used for systems that does not require any intermediate action and also which are requiring large amount of data for processing and which is required to be carried out on the data will be done on the cloud. Whenever there are some intermediate responses is required, then we can go in for a technology called as fog computing that can be used to do some intermediate computations rather than going for the cloud, which is in centralized computing.
We will cover fog computing in the next upcoming slides. Now, let us see what cloud computing is in IoT and why cloud computing is required in IoT. Some architectures in IoT requires the data to be processed and are required to be carried out centrally on a large volume of data which is collected from the sensors. And the sensors, since they have very limited capability to carry out any processing, the data is now pushed on to the cloud and the processing is carried out centrally. In this architecture, you can see that between the smart devices and the application layer, we have the cloud computing.
So, the cloud computing is a centralized computing place where all the data is being commonly computed and then the responses are being generated and they are communicated via the application to the smart devices. In cases, in cases where there is very huge amount of data which is required to be computed in the cloud and which cannot be carried out, then we will carry out some method where we do an intermediate response. Now, let us see what cloud computing is in IoT. Some architectures in IoT require that the data be processed centrally on a large volume of data that is being carried out on the cloud.
The information from the sensors are collected and passed on to the cloud platform. The cloud platform will process the data and it has got various applications to deal with this data. The cloud computing can be used for systems that does not require any intermediate actions and also requiring large amount of processing to be carried out on that data. Whenever there is a need for an intermediate response which is required to be carried out, then there is a new technique called as fog computing which can be used on that data.
We will cover the fog techniques in the next slide. What is fog computing? When there is an intermediate response required from the systems, then we go in for a concept known as fog computing. Fog computing is a decentralized computing infrastructure in which the data computation, storage and applications are located somewhere between the data source and the cloud. Fog computing brings the advantages and power of the cloud closer to where data is created and acted upon. Many people use the term fog computing and edge computing interchangeably because both involve bringing the intelligence and processing closer to where the data is created.
This is often done to improve efficiency. Though it might be also be done for security and compliances reasons also. Fog computing is an layered approach wherein we insert preprocessing, storage and security between the monitoring layer and the transport layer. This is basically made to make the system more effective and smarter. Between the physical layer and the transport layer, there is a monitoring layer, preprocessing layer, storage layer and the security layer, which represents the fog architecture, which we are going to use it in the smart IoT.
In the fog layers, the monitoring layer, the monitoring layer monitors the resources such as power, queries, responses, services, status of node and devices. From the monitoring layer, the data is passed on to the preprocessing layer. The preprocessing layer performs preprocessing tasks such as filtering, processing and analysis of the sensor data. The storage layer performs the storage functions such as data replication and distribution of the data. The security layer will ensure the data privacy. It carries out encryption or decryption and also it checks for the data integrity and maintains the privacy of the data.
Now let us see what is an IoT taxonomy. Now let us talk about the various taxonomies of IoT. These are the most commonly used architecture in the IoT devices that are currently available in the market. These are the very generic blocks for IoT. Based on the requirements and need, each device can be customized to meet the intended purposes. The basic layers are perception layer, preprocessing layer, communication layer, middleware and applications. The first layer is the perception layer, which has got the sensors to collect various data.
The data from the perception layer is passed on to the preprocessing layer. Here on the raw data, various operations are performed such as noise removal, filtering, processing to a minimal required levels and the data is sent on to the network. The next is the communication layer where the minimally processed data is communicated over the network using different protocols and standards. The next is the middleware, this makes the system to work much smoother. The middleware creates abstraction such as hiding the hardware details. In the application layer, various applications that improves the user experience and also it increases the efficiency of the applications.
Now, let us take the perception layer. The perception layer plays a major role in IoT. They are responsible for sensing the environment and they collect the data. These sensors are chosen and customized based on the application requirement. These sensors are required to be swap optimized. I say swap optimized. That is, it is optimized for size, weight and power. The size of the sensor should be as small as possible. That is, they are required to be very miniaturized in size. They should be light in weight and also they should consume very, very low power.
There are various types of sensors that are used based on the application requirement. The sensors used can be a chemical sensor. It can be a biological sensor. It can be a medical sensor. It can be an environmental sensor. IR sensors. It can be an RFID, gas sensors. Or it can be based on the application, whatever sensors you are looking at. Other sensors that are used in the phone such as accelerometer to measure the activity, gyroscopes, camera, microphone, biometric sensors, light sensors, etc. All the sensors which are used or which are going to be used in an IoT system are required to be SMART.
I use the word SMART. S stands for specific, M for measurable, A for attainable, R for realistic and T for timely. Since the IoT devices are going to be used and supposed to work under various extreme, weather conditions, they are to be very ruggedized and they are required to be qualified and they should be qualified for various mandatory standards so that that can be very easily deployed in the field. So you can see that this is the perception layer and you can see the various sensors which are going to be covered and also the various mobile sensors which are integrated into the mobile phone.
The next layer is the pre-processing layer. Here is a layer where the pre-processing is carried out on the data. The pre-processing layer lies between the sensor or devices and the cloud data center. The functions of the pre-processing layer are it will do the filtering, processing, analysis and then summarize the data before sending it on to the network. Since there is a real-time response in the IoT which is required, all data cannot be processed at the cloud centrally. So they have to be processed to some level at the sensor itself.
So there is a need to pre-process the data at the site of collection itself so that the processed load at the cloud is very minimal and the processing is distributed. Also the smart devices are mobile. They keep moving across the network and even it makes very difficult for processing of the data at the cloud centrally. So you need to see through that at the sensor side the data can be processed. Also since we are... In real-time responses, latency is not acceptable. Due to the scalability and adding of multiple devices to the network, load is likely to increase and latency is also going to increase.
The scalability of these devices in the network should be done keeping in view the latency of the network so that you don't have any delay in the data being processed and communicated to the next layer. The next layer is the pre-processing. Pre-processing is carried out using the fog computing which we had discussed earlier. The following are the advantages which we are going to gain by use of the fog computing. We are going to achieve lower latency and less time is required for computing and storage access also.
Since the fog nodes are distributed, they provided services to the mobile devices so the minimal processing is carried out then only you are sending it to the next layer. These smart devices are mobile so they can communicate to the nearest gateway very easily. The applications are going to have very high latency requirements and they need to receive the responses in very real-time so that the responses can be communicated back to the device in a very short time. The data requiring more or high processing is only sent to the cloud for computing.
Wherever some minimal computing is required, it can be done at the pre-processing stage. Wherever any massive computing is required, it can be sent to the fog layer for computing and then it can be communicated back to the devices. The next layer is the communication layer. Once your data is being acquired, pre-processed and then it has to be communicated. So there are wide number of communication channels available. Communication is a very very challenging job and the data is required to be securely transmitted without any errors to the destination.
Each smart device in the network is to be identified and should have an unique ID because there are so many number of devices which are going to be used. Each device should have an unique ID and you should know from which device the data is going to come to you. And low power consumption is very very essential so that the remote site, the data is going to be sent at very high speed communication and also you will see to that you will not have lose the sensor by due to the shortage of battery power.
And you need to preserve the battery for longer duration. High data rate and lossless communication is very essential for real-time processing and real-time response is also required by the system. You need to have efficient routing protocols for the data transmission. So if you see the communication modalities are plenty, you can have communications which can be wired communications or it can be wireless communication. There are number of wireless communication technologies which are available like the Wi-Fi, the RF technologies. You have the Bluetooth technology, near-field communications. You have the RFID based, ZigBee and the mobile communications covering 3G, 4G and later on the 5G is targeted to come into the market.
And you have various protocols for the smart devices like the link layer protocol, adaption layer, routing protocols and application protocols. And we have low power technologies such as low power Bluetooth, low power Wi-Fi and low power ZigBee technologies are available for the communications. The next layer is the middleware. The middleware is one of the key challenges. Basically, it is responsible for intraoperability of large number of devices. If I say if I have about 100 devices in the network, And it is not necessary that all these devices will have the same programming languages.
They might have different languages and they might have handling of different data formats. And these devices will not be easy to program because they are going to use different programming techniques. And the output interfaces are going to be totally different. There is the need for a mechanism which is required to be built. So thus, these devices can communicate to each other on a common platform. Another important aspect which you need to be considered is that all these devices should be discoverable independently and whether they can be managed independently.
These devices are going to be used for critical applications also. In case that there is a device breakdown, we need to see how we can manage, maintain and repair these devices in a timely manner. The next aspect we should be considered is the scalability of these devices in the network. When I say I am going to grow my network or when I am going to expand my network, There should be a minimal change in the middleware and the network should be expandable easily. It should not call for a major change in the middleware.
The network must also support security of the data and also it should have privacy of the data. Which is very very important, especially if you are dealing with medical data. When my network is scaled up, then I can build up an highly capable middleware so that the big data analytics can be carried out in the cloud itself. Context detection is very useful to find out which database orientation the sensor nodes are and what kind of services they are and what processing is going on and what events can be detected, how they can be handled.
These are the important factors which you need to keep in mind while selecting the middleware for your applications. The major factors to be considered in the middleware when you are designing them are what is the application of the IoT, what type of database I am going to use it, what are the semantics here, what are the events proposed, how are the events are going to be monitored, how the events are going to be recorded, and what type of services are going to be provided. The next layer is the application layer and the application layer which is the last layer and which is the front face of an IoT application.
This is what the end user gets. This layer defines the purpose of what an IoT platform is designed for. These applications of IoT can be for any general applications or it can be for healthcare applications also. To name a few general applications where IoT is designed for, it can be for smart homes, smart cities, smart agriculture, smart energy, smart transport. Other major applications in the healthcare industries are like assistive living, smart home healthcare monitoring, smart wearables, smart hospitals, smart community based healthcare management, smart drug dispenser.
Basically, the application layer is where your data is going to be processed and represented here. The data can be represented in the form of a text or it can be in the form of a graph, it can be a numerical value, it can be a statistics or it can be a plot also. The applications can be generic or it can be even for specific purpose also. So, the applications like your home care or it can be for your healthcare, it can be for your smart cities, car, hospitals, etc.
All can be managed sitting at these applications. Now, let's take up the applications of IoT in detail covering the general applications and the medical applications. The applications covered here are only for commonly used applications which are quite used all over the world, but the applications in IoT in various fields is left to the designer imaginations. You can have wide varieties of application built based on your thought process and you can design any custom built applications and based on the sensors, based on the application, based on the user requirements and variety of applications can be built on using the IoT technologies.