Unlock all 16 lessons of Fundamentals of Electrical Systems and Electrical ArchitectureFull course ₹40,000 · paid
Conductors, Semiconductors, AC Supply, Frequency and Earthing
A free lesson from Skill-Lync's Fundamentals of Electrical Systems and Electrical Architecture course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 2”
What will you learn in this free Fundamentals of Electrical Systems and Electrical Architecture lesson?
The instructor classifies materials as conductors, insulators, semiconductors and superconductors, and introduces doping. It then covers common voltage sources, single phase and three phase supply with phase, neutral and R Y B lines, 50 hertz frequency, impedance, the types of earthing, and measurement with a multimeter.
- Conductors, insulators, semiconductors and superconductors
- Single phase and three phase supply with phase and neutral
- Why frequency matters for devices such as induction motors
- Chassis ground and earthing for safety
What comes after lesson 2?
The next free lesson is lesson 3, “Inductance, Capacitance, Power and Energy in Circuits” (25 min). Later in Skill-Lync's Fundamentals of Electrical Systems and Electrical Architecture course (paid): lesson 4, Week 1 Session 4; lesson 5, Week 2 Session 1; lesson 6, Week 2 Session 2. The full course has 16 lessons (6 h 56 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Yeah, hello guys. So, welcome back to the course. And so, so far we had a discussion on basic circuit which are open circuit, closed circuit, short circuit and the basic law from the physics which is Ohm's law and that is that states that current flowing through a conductor is directly proportional to the voltage across that conductor. Then we went through some definitions for voltage, current and resistance. And yeah, now let's continue with the discussion and let's start with the topic which is conductor and insulator. So, let's talk about conductivity which is a property of a conductor. Electrical conductivity is much similar to the concept of thermal conductivity.
Like most of the people who are attending this course might have a mechanical background. So, for the mechanical engineers thermal conductivity is more easy to understand and they are masters of it. So, what is thermal conductivity? It's nothing but the ability to conduct heat. So, for some materials it will be high and for some material it will be less. The same thing is for electrical conductivity. For some material electrical conductivity will be higher. It will be conducting electricity in a better way than some other materials.
So, this is basically property of a material. Coming to the next point. It is based on the ability to conduct electricity. Materials are classified into the following types. One, conductors, then insulators, then semiconductors, then superconductors. So, you take any material around you and you can classify it under one of these sections. So, yeah, let's go deep into that. Yeah, so what is a conductor? Conductor allow free flow of electrons from one atom to another. It means that it allows free flow of electricity. It will allow the electricity to conduct through that material. And you can see the examples here. Silver, Copper and Aluminium. Silver is considered to be the best conductor.
But since it is costly, we don't use it widely and we go for Copper or Aluminium. And here we can see some conductors like these are some wires we use. So, inside is a conductor which can transmit electricity through them. Then we have insulators which restrict the free flow of electrons. So, basically insulate does not allow electricity to flow through it. Rather it restricts it. So, the examples for that are plastic, paper, rubber and glass. So, this image, a particular thing, it's an insulator. You might have seen in many high voltage lines around you.
So, this basically provides the insulation between high voltage line and earth. So, one side it is earth. It is giving support to the transmission line and on the other side it is actually holding the transmission line. Okay. So, this insulator ensures the conductor is not touching the earth. It's electrically insulated using this thing. Yeah. So, this conductors we can see in our everyday life. It's the, like if you see a PCB layout or if you see a basic wire, anything you see, like the, whatever the conducting part, whatever the electrons flow through, that they will be conductors.
In our first example, we have shown for a circuit, a voltage source connected to a lamp through a set of cables. So, that cable is a conductor. So, it allows the flow of electrons and insulators we use over the top of conductors because it is difficult to handle conductors. If it transmits electricity, if someone touches it, they will get shock. So, that's not what we need. So, we need to insulate it. We will apply an insulator over the conductor and we can hold those things for the safety purpose.
So, in a wire, the inside thing is conductor and outside is an insulator. It could be from plastic or rubber or any of the insulating material. Then, yeah, this is the reason, like we say, when we use electrical apparatus in our home, we stand over a rubber mat. If we stand over a rubber mat and operate electrical apparatus, even if we unknowingly touch any conductor which carries electric current, we won't get shock because the rubber mat protects us. It ensures that your body is not being conducted by that electricity.
So, yeah, that's about the insulators and conductors. Then, something which are very related to these two things and we discussed before are semiconductors and superconductors. So, what is a semiconductor? So, basically, semiconductors are those materials whose conductivity falls between a pure conductor and an insulator. For example, silicon and germanium. So, in the right-hand side, you can see some images of a transistor or ICs, LED. So, these things are, comes under semiconductors. So, you can see, if you see the industry these days, this semiconductor is actually ruling the world.
Not just industries, even our household, this semiconductor is ruling the world. It can act as both insulator and conductor depending on the condition around it. So, there are a lot of companies working on this and we can see a lot of applications of this semiconductor in our day-to-day life. And the companies like Intel, Microchip, Qualcomm are purely working on the semiconductor-based devices and semiconductor-based products. So, this is one of the areas where every engineer should be aware of and can get into the best companies in the industry.
Then, coming to the conducting property of semiconductor, we use a term called doping. It is D-O-P-I-N-G, doping. It means adding impurities to semiconductors. If we add impurities, then the features of conductivity properties are getting updated. So, it's getting altered by introduce certain type of doping. We can add it to increase the conductivity or reduce the conductivity, anything we can do. We have N-type semiconductor, P-type semiconductor, many things which may not be required for you guys. But, out of interest, you can just go through the web and understand what is an N-type semiconductor and what is a P-type semiconductor.
Those materials are being generated as a result of doping. So, a semiconductor after doping is called as extrinsic semiconductor and a pure semiconductor is called as an intrinsic semiconductor. So, this intrinsic semiconductor and extrinsic semiconductor are the key terms you might come across when you work in the industry. Then, as the temperature increases, the conductivity of a semiconductor increases. Then, that is a major property of a semiconductor and we can increase the conductivity using by controlling the temperature as well. Then, I mentioned like semiconductor was a game changer in the industry.
It is ruling over the world. So, how did it happen? So, initially in 1947, transistor was invented. Then, this transistor is like we can switch on, switch off anything and we can act as an amplifier. So, there are wide applications for a BJT. It's basically a basic transistor which is coming from a semiconductor. Then, 1958, later ICs were being introduced. So, IC is nothing but it contains a lot of logic case and a lot of logic inside. It will be a small chip. It can do a lot of work basically.
Then, MOSFETs were introduced later that year in 1959. And the MOSFETs are also waived the path for high power electronics. And the processing electrical energy became much simpler after the introduction of MOSFETs. So, that's how the semiconductor industry revolutionized our lifestyle. Then, as I mentioned lifestyle here, where are we seeing it in every day? So, from your AC air condition control itself it starts. Like if there is no semiconductor, the air conditioner doesn't know what is the temperature right now. And it cannot change the compressor speed or whatever to increase or reduce the temperature.
There can't be a feedback mechanism if there is no semiconductor devices. And whatever you see in medical field or in your CPU, TV, mobile phone, fridge, LED bulb, anything. Whatever CC around you, it all contains semiconductors. That's the impact of semiconductors in our life. Then, next let's move to superconductors. So, what are they? In superconductors, there will not be any resistance. In normal conductors, there will be some resistance. Though it is very less, but there will be some resistance. If there is a resistance in a conductor, say I have a 1 meter of copper wire.
And if I pass a current through that, ideally speaking, there should not be any resistance. And there should not be any power loss due to that. But in reality, we have some resistance to the conductor. As I mentioned in one of the previous slides, as the conductor diameter increases, the resistance reduces. And as the conductor length increases, the resistance increases. Though the resistance is minute, it is significant. We have a... Huge loss there. So, that loss is called as I²R loss. It's a formula derived from the basic power equation, voltage times current. It is I²R. As the current increases, the losses also increases. I²R means I is the current and R is the resistance of the material.
So, we have some losses in conductors. Then, that's why like people started looking for alternative good conductors, best conductors and they came up with some materials which can have zero resistance at a certain temperature range. So, that's what like people are still working on that and there was some recent development. Even in the room temperature, some of the materials were able to work as a superconductor without any resistance. But the research is still ongoing in the lab and it is currently practically impossible to implement in our industry or in our households because of the high cost associated with it.
And, but yeah, people are keep working on this superconductor principle and in future, hopefully, we will have some conductors with no resistance being offered so that there won't be any power loss. Coming to voltage and current again. We discussed like we have voltage source and when we connect it to load, it will generate a current and the current will flow from source to load. So, the question is, how do we know some current is flowing and there is a voltage across the source or there is some voltage across the load? How do we know? How do we measure that?
So, we have some devices for that. For measuring the voltage, it is voltmeter and for measuring the current, it is called as ammeter. So, the basic unit of measurement for the voltage is volts and for the current, it is amperes and so what are the voltage sources you have seen in your daily life? One may be a 12 volt DC battery which contains 12 volt and it could be lead acid or maybe even lithium ion or you can see TV remote battery which are around 1.5 volts.
They are non-rechargeable batteries. Once you use, you have to throw it out. So, that's around 1.5 volt. Then, do you know like what is the voltage coming to your house if it is a single phase or three phase? If it is a single phase, you get 230 volts AC between phase and neutral or phase is also called as line. Then, between line and neutral, you get 230 volts in a AC single phase system. If you have three phase voltage coming up to your house, then you can have a voltage between a phase and neutral or between two phases.
In three phase system, you have three phase coming in along with a neutral. So, that phases are generally called as R, Y, B which symbolizes red, yellow and blue and those three phases are coming in and one neutral also coming. Voltage between phase and neutral is 230 volt and the voltage between two phase is 415 volts. That is the voltage we have in our house. And, so, is that the only voltage we see in our day-to-day life? No. We have seen the distribution transformers, right? Like every 1 kilometers at least, we have a transformer in the roadside.
Which is basically a step-down transformer. So, for that distribution transformer, the input voltage will be around 11 kilovolt and the output voltage will be 415 volt three phase. Input also will be three phase which is 11 kilovolt. Output will be 415 volts. So, these are the some of the voltages we see in our daily life. Then, yeah, how do we measure that? If I say 415 volt, what is that? Is it the peak of that or it's the average of that or it's something else of that?
So, one thing you have to know is like for an AC system, the voltage and current are coming in a sinusoidal wave shape. It means in the, here you can see in the top red color, you can see a wave which is the sine wave. So, our voltage and current will be coming in this shape. If we keep a measurement coil across the wire, then you connect it to a CRO or a DSO which are cathode ray oscilloscope or digital storage oscilloscope. So, you can see the shape of voltage and current and for an AC system, it looks exactly like this.
It will be a pure sine wave. So, we can have lot of measurements for that average RMS or peak. So, average of a sine wave is 0. Average of sine wave is always 0. So, average of an ADAC signal is 0. Then, peak value is the peak of the sine wave. Say, peak could be anything like whatever we desire, say 1000 or 500. It could be according to whatever voltage coming in and we have something called RMS. So, RMS is a one way to measure the sinusoidal voltage and current.
We say it has RMS voltage or RMS current. So, that is nothing but square root of mean square. It root mean square RMS means it is basically square root of 1 by N sigma XI square. It means you have 10 points, take the square of all 10 points, sum it up, divide it by 10, then take a square root. That is the RMS value. So, for an AC signal, RMS value will be peak divided by root 2. So, for an AC signal, RMS value will be peak value divided by root 2.
So, whatever we say 230 volt or 415 volt are actually not peak value, not average value. They are RMS value. So, when someone asks you what is that 230 volt, then you have to say it is the RMS voltage in a single phase system. Then, here below I have shown some other waveforms and for these waveforms, the average, RMS and peak will be different. Say, assume here is the zero line for the square wave and it is going to say plus 1 and minus 1. Here also, the average will be zero and RMS will be one value if we calculate it as per the formula and peak will be this particular value.
Here, we assume it as 1. So, for triangle and sawtooth, it will be different depending on the wave shape. So, next concept is frequency. I just said like we have AC systems in our house and it is having 230 volt and 415 volt AC and there is something called frequency also. So, frequency is defined as the number of times an event gets repeated in a unit time interval. Say, we have a sine waveform and the frequency is number of sine waveforms in one second. I say like generally in India, the frequency is 50 hertz AC signal we get.
It means that 50 hertz means every second 50 times the sine wave is happening. That is the meaning of 50 hertz in an AC system. Alright, is that clear? So, we have something called frequency in AC systems. It is defined as the number of times an event gets repeated in a unit time interval. In a second, how many sine wave is present for an AC signal? And yeah, we have 50 hertz system as I said in India and in most of the European countries, they follow 50 hertz system.
But in US, they follow 60 hertz system. In US power grid, you can see 60 sine waves in every second. So, it is not standardized all over the globe. It is okay to have different frequencies. But the only problem is, we cannot connect a 50 hertz system to 60 hertz system directly. Rather, we would need the help of some power light phronic converters to get them connected. In India, throughout the country, we have 50 hertz system. And we are all interconnected between all the states and all the load sender or generating stations, everything.
Yeah. Then, say some of the devices which work at 50 hertz may not be working in 60 hertz with the exact property. Say, for an example, an AC induction motor which is generally called as, maybe you can consider it as an electric motor which can be connected to AC side. Say, if it is connected to 50 hertz, it might rotate at 3000 rpm. But at 60 hertz, it may not be. It may be running at 4000 rpm. We don't know. It will be running at a different frequency, different speed.
So, at different frequencies, different speed of the motor is expected. And the equipment is not expected to perform same in different frequency of AC signals. Yeah. Then, we have some concept called impedance. So, impedance is same as an electrical resistance but on an AC system. In an AC system, we have this resistance is called as impedance because many other factors also comes into the picture. Like inductance and capacitance. So, we can discuss those in the coming slide but please keep in mind, change in frequency changes the impedance.
If there is a frequency change, then the AC resistance will be changed. The next is phase at neutral. So, this is another common terminology you will hear from the electrical people. So, this is basically we see in our house also. So, like as I mentioned before, in our house, assuming I have a single phase connection, I get... One phase line and one neutral line from the electricity company. Then I will have a earth in my house. So three wires will be there. And the phase and neutral are the main one. So phase line carries the current. Neutral line returns the current back to balance the flow. These are the two things. So phase is like positive and neutral is like negative of DC.
Though they are completely different. Just for a comparison I can just say like in DC we have plus and minus. In AC we have phase and neutral. Without having both phase and neutral we cannot have a complete circuit and we cannot have a current flow that can be useful for our work. So the phase and neutral are AC positive and negative kind of thing which are coming from the electricity company connected to our load. Then we have single phase and three phase. Single phase means phase and neutral. Three phase means three phase and one neutral.
That R, Y, B. Three voltages. Three voltages will be coming. So why do we need three voltages? Just one voltage is fine right? But the problem is when we have some high power load. Then single phase connection might not be sufficient. We need three phase connection. For example I have a higher HP motor which needs to be drive heavy load. Then I need to go for a three phase connection. So I use a three phase motor with a three phase connection. And I can drive pretty heavy load. That's about it. And one more interesting thing about three phase voltages is I said there will be three phase lines.
So you will be thinking okay there will be three sine waves coming in. One because AC is a sine wave every phase will have its own sine wave. So three sine wave. So three sine waves coming in. Yeah that's right. So we will have three sine waves. Then what is the difference? Then why three? We can just take one from the electricity board and make it three by taking three conductors out of it. Yeah but that is not possible. The three phases means they are phase differences there between the three phases. Say for example let me take this sine wave. The red sine wave in the top of the image you can see.
Assume this is one voltage and the next voltage will be something like this. It will be having a phase shift of 120 degree. It will start from here. Then it will go like this. This is one sine wave and next we'll be having another 120 phase shift and it will be starting from the top here. It will be going like this. So basically all the three will be 120 degree phase shift and each other. Total degrees in angular degrees of a sine wave is 360. So the one assuming this is R phase then the Y phase will be minus 120. This one minus 120 degree.
Then the B phase will be this phase plus 120 degree. So it's basically the leading and lagging of voltages will be happening here. That's the need of three phase systems. Then we have another interesting concept called as earthing. I am sure everyone here who are attending this course might have heard of earthing, grounding and might have seen also how the earth pit is made and how things OIS are connected there. In the image it is clearly shown a earth connection here. Earth rod. This is one rod which is put into the earth and a cable is connected to that. So let's see what it is.
So earthing is done by connecting a specific part of the circuit to the ground. Means earth's conductive surface. This is done for safety and functional purpose. Earthing a machine's body provides safety to the machine's operator. There are ELCV and RCCV which is called as earth delicate circuit breaker and residual current circuit breaker which are used for earth current detection. Okay let's come to the first point here. Earthing is done by connecting a specific part of the circuit to the ground. So we have three kind of grounding in our electrical systems. So first one is chassis ground. Chassis is the outer conducting layer of a machine. Chassis is basically for protection purpose and not for the electrical conductivity thing.
So the chassis should not have any conductivity. Should not conduct electricity. So ground that chassis directly. So that is called as chassis ground. That is for the protection of flusor. As mentioned here earthing a machine's body provides safety to the machine operator. Body is generally not supposed to have any electrical conduction. But in case if any electrical conductivity happens that should be prevented. If the body is grounded to earth then if any conductivity happens that current will flow inside the earth because earth offers very very low resistance.
So the current chooses the very very low resistance path and it go inside the earth and the user will not be impacted by any such act. Then another type of grounding is the signal ground. We will have many low voltage signals in our electrical circuit. So that low voltage signal needs to have some reference and that reference is generally taken as earth. So signal grounding is also one of the earthing method. Then another last one is our earth ground which is for the power system. Like for our power system for high voltage applications and all we connect them to the neutral to the ground and that is the power system ground.
So that's about the different types of grounding and now you can say why is the chassis grounded in a 12 volt automotive electric system. So that is basically for the protection purpose. If someone touches a chassis also he should not get shock. Then I have mentioned about ELCB and RCCB. ELCB is the earth leakage circuit breaker and RCCB is the residual current circuit breaker. So what an ELCB does is ELCB will have inputs like phase, neutral and one contactor to the body of the equipment. If that contactor detects some voltage on the body of the equipment it trips the input voltage and it protects person who might touch it or who it might even protect the equipment itself because of the faulty operation it had some voltage over its body.
So that's what ELCB does and RCCB is the equipment which we might have in our home also and that is called residual current circuit breaker. So what it does is it compares the phase and neutral current every time. So if there is a 4 ampere of phase current there should be minus 4 ampere of neutral current because it's the complete circuit and whatever current comes through the phase should return through the neutral after flowing through the load. So that is the basic concept but somehow if the phase current and neutral current are not matching then the RCCB will get alerted and it will trip off the system.
It means that say 4 ampere is coming from the phase and only 3 ampere is going out to the neutral it means that that 1 ampere is going somewhere else which we don't have any control on. It may be going through the body of the equipment or it may be to the earth or it could be through the operator or we don't know some current had gone somewhere. So we just it's not at all expected thing and that should not happen. That's why RCCB identifies it and trips it immediately.
Yeah and just to add one more thing to this ground. So how this ground is made we try to reduce the resistance as much as possible of this road and we reduce the earth ground by like using some mechanism. Like we put some charcoal, salt and too many other natural and chemical things to reduce the resistance and increase the conductivity to maximum to ensure the earth always provides the least resistance path for the current to flow. One more thing to add here it is you might have seen some printed circuit boards.
In printed circuit boards there will be exclusive ground plane so that ground plane helps us in taking up the noises. If some noises are coming up in the PCB then as the earth offers very low resistance it will go into the less resistance mode without hampering the other useful part of the circuit. Yeah that's all about the earthing thing and yeah so what all we discussed so far we started with the conductor, insulator, then semiconductor, superconductors, measurement of voltage and current, frequency, phase neutral, earth. So how does frequency is being measured that also we have some exclusive meter and just to add up it is not just voltmeter or ammeter measures these things basically we have something called multimeter these days you might have seen in your electrical lab during the college days there will be something called multimeter which will be yellow in color most likely and that will be we connect it across the devices and check the voltage and current.
So voltmeter and ammeter are exclusively for these purposes and we have multimeter also which can measure everything when voltage, current, frequency. Even power consumption. Many things can be calculated through the different kinds of meters. So that's about this section. Okay. Yeah. Thanks.