← Course overviewFree lesson 1 of 3 · lesson 1 of 16Next lesson →

Unlock all 16 lessons of Fundamentals of Electrical Systems and Electrical ArchitectureFull course ₹40,000 · paid

Price & syllabus
Free lesson · 22 min · no payment

Basic Circuits, Ohm's Law, Voltage, Current and Resistance

A free lesson from Skill-Lync's Fundamentals of Electrical Systems and Electrical Architecture course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 1”

What will you learn in this free Fundamentals of Electrical Systems and Electrical Architecture lesson?

The instructor introduces the course and its four-week plan, then builds up a basic circuit with a 12 volt battery and a lamp. It compares open, closed and short circuits, states Ohm's law, and uses a water hose analogy to explain voltage, current and resistance, including the effect of conductor size.

  • Open, closed and short circuits in a simple DC loop
  • Ohm's law and the water hose analogy
  • Definitions of voltage, current and resistance
  • Why conductor size affects current flow

What comes after lesson 1?

The next free lesson is lesson 2, “Conductors, Semiconductors, AC Supply, Frequency and Earthing” (30 min). Later in Skill-Lync's Fundamentals of Electrical Systems and Electrical Architecture course (paid): lesson 4, Week 1 Session 4; lesson 5, Week 2 Session 1; lesson 6, Week 2 Session 2. The full course has 16 lessons (6 h 56 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Hello guys, welcome to this course. This course is about the fundamentals of electrical systems and electrical architecture. And from the name itself, you can see this is about the basics of electrical engineering. So, we have a lot of electrical systems around us and including from the recent electric vehicles and the power systems, the power coming to our house, everything is related to electrical engineering. So, in this course, we will dive a little deeper into the electrical things and try to understand what it is about. So, basically, this course is divided into four weeks and in this particular week, we will be starting with basic electrical concepts and terminologies. Let's see the table of contents for this particular week.

So, initially, we will be discussing about the course itself and a basic introduction to that. Then, we will go into the important keywords related to electrical engineering and a person who is working on electric vehicles or whichever the electric field should know about, like the basic things like what is current, what is voltage and even sometimes what is battery, what is a motor. So, we will be working on electric vehicle. So, we will be working on electric vehicle. So, we will be working on those things though we may not be an electrical engineer. So, those are the things which we should be knowing. Then, the difference between AC systems and DC systems will be discussed. AC is called alternating current and DC is the direct current.

As we know like in our houses and DC voltage. As we know like in our houses and all we get AC voltage and in say a battery we get DC voltage. So, we are seeing what are the difference between them and which one is better for what application. Then, again some other terminologies associated with the AC system. Here, it's more focused on the AC system where the power in your house, how it is coming and what are the things associated with that. Then, then series and parallel connections. So, if we have multiple loads and a single source, mostly we connect load in parallel to them or sometimes in series to each other to the source. So, we will see in which all conditions we connect in series and in which all condition we connect in parallel.

And also, if we connect in parallel. And also, if we connect in series what is the equivalent thing. We have to simplify the load and source into an equivalent circuit. If it is in connected in parallel. Again, we need to find the equivalent resistance or equivalent capacitance. And sometimes it could be series plus parallel combination. In most of the real world examples, you cannot see only series or only parallel. Rather, it will be combination of both series and parallel. Then, coming to learning objective. So, the objective of this session is to understand the key terminologies used in an electrical system and learn about AC and DC systems.

So, rather than you may not be an electrical engineer, but as a person who works in an area related to electrical systems, we should be aware of many terminologies so that we can understand the language of industry or the language of electrical engineers. So, next we will start the introduction to the course. And let's see what this course is meant for students who need to understand the fundamentals and key terminologies associated with an electrical system. And the course can be useful for electrical engineers to revise the basics and for non-electrical engineering background students to get a grasp of electrical system.

So, I know that like most of the people who are attending this course may not be from the electrical background. They may be from mechanical background or a different background where they need to understand the basics of electrical things. They cannot perform the task without knowing the basics of electrical engineering because the electrical and mechanical or electrical and whichever the field you are working on is actually closely related. And knowing the electrical concepts will help in understanding the things better and progressing in our career as well as in our getting into a new job.

Then this course acts as a foundation for taking up advanced courses on electric vehicles. So, this course is designed fundamentally for the people who are interested in electric vehicle area because in EV is booming up these days a lot. So, initially only Tesla was there. Now all the companies are going into EV and our country India is having some ambitious plans to have more and more EVs in its road. So, there are a lot of opportunities in the EV industry and we need people from all the backgrounds from the industry to work on and to develop a stable product in this area.

An electrical engineer cannot develop an entire vehicle by himself rather he should get the support from mechanical engineer and IoT engineer and basically most of the fields for developing an electric vehicle. So, there is a lot of potential in this industry for non-electrical engineers. So, yeah but for them the basics of electrical engineering is a must to have. Then following the weekly slides will help the students to face the challenges at the end of each week. So, at the end of every week I will be discussing some challenge that you can work upon and it may not take much time and it will be closely related to what we discuss in the slides.

So, following the weekly slide will help to track it easily. Then what is required to take the course basics of high school physics and some willingness to learn. So, as this is a very fundamental course, you need not to have any much higher experience or no need to have exposure to big things. It's just a some basic physics understanding is sufficient and even the basic physics will be refreshed in this course and a strong willingness to learn can help you to understand the concepts and reach in a better position.

Yeah. So, now let's start the course. Let's start the course with important keywords. First one, what is a circuit? So, you might have heard of lot of circuits. So, basically it's a closed path and here we are discussing about electrical circuit. So, an electrical circuit is a complete and closed path through which an electrical current can pass through. So, you will be hearing lot about circuit. This circuit is not working, that circuit is working and how to make a circuit. Some circuit is burned. So, we need to know first of all what is a circuit and why those things are happening.

So, in a basic circuit, we will have a power source and we will have a power load. So, the source will be pumping power to the load through some control action. So, take a basic example, I have a battery or say 12 volt battery, DC battery that is marked here as cell and I have a DC lamp. So, that lamp is marked here, connected them through a switch. So, this switch is a mechanical switch and we can turn it on and we can turn it off.

So, this particular thing is a circuit. This can be set as complete and can be set as closed path if the switch is closed. The red color here is the cable used here. That is basically a conductor. It could be any wire, copper wire or aluminum wire. Any conducting thing can be used to connect between the source, load and the switch. And the source here can be a DC source or an AC source. As I said before, 12 volt battery is a DC source and we can have an AC source also.

Like in our house, we have lot of switches and we have a power source coming from the electricity company and we have lot of switches. So, that is a circuit over there. Ok, then let's move to the next slide. And here it is about open circuit and closed circuit. So, basically in the previous circuit, here if the switch is open, then it is called as open circuit. There is no constant flow of current here. So, that's why it is called as open. A circuit that is open at some point is an open circuit.

It is an incomplete circuit through which current does not flow. So, yeah, here is a image given for the open circuit. So, we have a DC source here and there is something is open here. Here the conductors are not touching. Here a wire is coming up from the battery and there is a wire coming up from the lamp. But they are not connected to each other on this particular side. Though they are connected here in negative, they are not connected in the positive. So, for current to flow, we need a complete path.

From the positive to negative, it should be complete. It cannot be open somewhere. If it is open, we call it as an open circuit and the current will not be flowing through the circuit. Then we have something called closed circuit. Closed circuit means the source and the load are connected to form a closed loop. So, here we have a DC source and we have a lamp here and they are connected through conducting wires. A wire is connected from the negative of the battery to lamp and another wire is used to connect the positive to the lamp.

So, here the entire bulb is connected across the lamp. So, whatever the voltage is of the battery, it is getting applied across the bulb. So, bulb will start glowing and it will take up some current. So, we will discuss what is exactly the current and voltage in coming slides. But, this is the basic idea regarding this. Then, just to explain something on the real life front. you will like most of… You may be familiar with automotive electronics. So we have a battery like even in our not only in electric vehicle in our conventional vehicles also we have a strong electric circuit inside a car. We have a battery that would be 12 or 24 or whatever be the voltage and we have many electrical parts inside the current even ICE based vehicle. Like the basic thing is we have a headlight.

Okay, so assume headlight is connected to battery and the switch is on. So it will be closed circuit like this. Then if I remove the wire terminal from the battery then it becomes an open circuit. Okay, is that clear? I have a battery, I have a lamp and two wires is used. One connected to positive to lamp, other connected to negative to the lamp and at that time the lamp glows all good. That's a closed circuit. If I just take the wire terminal from the battery, I just take it out and I just hang it in the air. At that time that becomes an open circuit. So that is the difference between open and closed circuit.

Then we have something called short circuit. So we all know short circuit is something which we don't like to have. We always hear short circuit in a negative terminology. It's considered as a negative terminology. So what is a short circuit? A circuit in which an electric current flows along an undesired path with no or less load. So say you can see the closed circuit here. The battery voltage is applied across the lamp and the lamp is glowing. It is what we desire and what is actually happening.

But in a short circuit, if you see the voltage across the battery terminal is not coming across the lamp. Rather it is getting diverted to some other path. Okay, so say I have a battery and I connected it to lamp and I have two wires connected. Then what happens is suddenly another wire comes up which is connected between the two terminals of battery. So the positive and negative are connected through just a wire. That is called as short circuit. So if it is connected through a load. So if it is connected through a load, it is fine. No problem. It will take a current and the voltage will be dropped across the lamp and it will glow. All good.

But if we just connect a wire across the battery, it's actually takes up very high current from the battery and it damages the battery and it could cause a fire hazard. That is the issue with a short circuit. Then you might have heard a lot of fire hazards in the TV news or in the newspaper. You can see every day there are a lot of incidents happening. So that is basically in the AC systems. It is pretty common if the wiring is bad, if the wiring is improper. There in the AC system, short circuit is nothing but if the face and neutral touches each other.

If they touch each other, then there is a huge sense of fire hazard if there is no enough protection available. So all these protective devices, what we see in our home had came in recent decades like this miniature circuit breaker or ELCD, residual current circuit breaker, whatever we use in our home for electrical safety. Those things came very recently. You may be remembering like in the maybe even 15 years back, things were only fuse we had. We had one fuse that is used to protect, but in still in many of the buildings, like they have only fuse.

They don't have any modern circuit breakers and the fuse also needs to be rated properly. Sometimes fuse will be rated for very high current. So that fuse will not detect the short circuit. So that will cause a huge current flow and a cause potential fire hazard. So yeah, that's about the short circuit and how to detect short circuit is as simple as just measuring the current. If we can measure the current properly, then we can get to know what is the amount of current flowing. Is it desired or not?

We know that like the desired current may be active will be according to the load. If we have a single load of say which takes one ampere can keep a fuse of two ampere in which if the current goes above two ampere, the fuse will blow or we can make a current measurement and we can say like, okay, if the current is more than two ampere, then something is wrong with the circuit, something is shorted or something else is happening, which is not desired by the user, then they can open the circuit and they can save it from fire hazard.

Yeah, now we discussed a lot about source, current, low resistance, short circuit and all. So what exactly is voltage? What exactly is current? Or what is resistance? Is resistance good or is resistance bad? When we said we have a short circuit, I mentioned like resistance is lower. So the current will be higher. That is not good. So what is resistance? Why it is not preferred for us? Let's discuss about that in this particular slide. So in our high schools, we might have heard about Ohm's law. So this is actually derived by a German physicist whose name is George Ohm in the year 1827.

He proposed this particular law. He proposed this particular law. And the law states that current flowing through a conductor is directly proportional to the voltage difference between the conductor endpoints. It means I is proportional to V and it will be equal to I is equal to V into a constant or popularly we write V is equal to I into R. So here V is the voltage, I is the current, R is the resistance. And just to give you an analogy to the real world example, what is a voltage, say assume we have a hose pipe and which water is coming in.

So the pressure at which water is coming in here, so maybe water will be kept on some height on the tank and it is coming from there. So that pressure is the voltage. So how much higher the pressure? So that much higher current actually we can give. So that is the relationship. It is the voltage that is related to current. And here to precisely say what is current is the speed of current flowing, speed of the water flowing out of the hose. Say if it is say 1 liter per second, it is 1 speed. If it is 2 liter per second or 3 liter per second, it all depends on the pressure.

If pressure is high, then the water coming out will be higher. If the pressure is low, the water coming out will be lower. So that's what the relation between pressure and the water speed. The same thing is with the voltage. If the voltage is high, then the current will be higher. If the voltage is less, the current will be lesser. As the Ohm's law suggests, current through this particular in this area is proportional to the voltage difference between its endpoints. It means that in other words, we can say the water flowing is also proportional to the pressure here.

Pressure between this point at this end point and the starting of the water connection, which will be in somewhere at the top. So that is the relation. And what is resistance then? Resistance is something which is preventing the flow of water. So assume we have some sand inside this hose and that prevents the flow of water. The same thing is what resistance does for the current. Resistance is something which prevents the current to flow smoothly. It is very much similar to sand in this hose. And two more things I would like to discuss here.

Here the current is heavily dependent on the size of the conductor. Here the water flow is heavily dependent on the size of the hose. If the hose size is higher, then it can carry large amount of water. Alright. In the same way, the current can be higher if the conductor diameter or the conductor area cross section is high, the current can be higher. That is the relation of regard to size of the hose. Then for the pressure, if the pressure is high, the hose may damage.

It means that the outer layer of the hose, it means the plastic thing we hold, should be thick enough to handle the pressure. Otherwise, it will break. It will have some holes. So the same story here for the electrical side. If the voltage is high, then the insulation for the conductor should be high. Otherwise, the insulation will melt for the conductor. So the insulation of a wire is directly proportional to the voltage. And the diameter of the conductor is directly proportional to the current taken by the conductor.

And the resistance as we see, it tries to oppose the flow of electrons here or which is the actual current. That's about the basic concepts. Then one more thing I would like to add here is, here the, say if lesser the sand, lesser the resistance will be. Or you can say if the diameter is higher of the hose, then the resistance will be lesser. And if the length is less, then still the resistance will be lesser. So same story is applicable for electrical system and for the resistance.

If the conductor cross section area is high, then the resistance will be less. So same story is the first tool of the Dominion Rrench cut which theECH is the sole Shout20. So same story isGeDOTA2. It takes theands and if the heavier one power is longer great then. If it is less, again the resistance will be lesser for the system. That's about it. Then these are some of the basic definitions for these terminologies. You can use it while revising also. And it's about voltage. What is voltage? It's the potential difference that pushes electric power from the source of an electric circuit through the conducting loop.

Maybe we can go back to this basic circuit and we can see what is the voltage here. Say I said this is a 12 volt battery and this voltage is pushing some current to the lamp. So that is what the voltage is. And let's see what is current. Current is the flow of electric charges. That is electrons. So current here in the example we said is the water flow rate. But in electrical reality it is electrons flow rate. It's the amount of flow rate. It's the amount of electric charges. Then resistance. Resistance is the, it is the resistance offered against the flow of electric current in an electric circuit. So the same thing we discussed about and I think it is clear for you now.

From the beginning we have this course for basic understanding of electrical systems. And we started discussing about a circuit. What is voltage? What is current? What is resistance? And we connected using cables. And what is an open circuit? What is a short circuit? And it's analogous to the mechanical system. Pressure and the water flow level. Let's stop it here for the time being and you can just recap the things once and we can resume shortly. Thank you.

Want the rest of Fundamentals of Electrical Systems and Electrical Architecture?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Fundamentals of Electrical Systems and Electrical Architecture course

The remaining 13 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Fundamentals of Electrical Systems and Electrical Architecture course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.