← Previous lessonFree lesson 2 of 3 · lesson 2 of 59Next lesson →

Unlock all 59 lessons of Design of Tensile StructuresFull course ₹40,000 · paid

Price & syllabus
Free lesson · 27 min · no payment

Mechanism, Types and Materials of Tensile Membrane Structures

A free lesson from Skill-Lync's Design of Tensile Structures course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Understanding Tensile Membrane Structures”

What will you learn in this free Design of Tensile Structures lesson?

The instructor explains why a membrane needs tension to stay stable, then classifies tensile structures as linear, three dimensional and surface stressed. The lesson separates pneumatic from tent structures, covers point, saddle, arch and mast supports, and compares PVC coated polyester, PTFE and ETFE fabrics.

  • Linear, 3D and surface stressed tensile structures
  • Pneumatic structures versus pre-stressed tent structures
  • Point, saddle, arch and mast supported types
  • PVC, PTFE and ETFE fabrics, cables and base plates

What comes after lesson 2?

The next free lesson is lesson 3, “Landmark Tensile Membrane Projects and Nature-Inspired Shapes” (39 min). Later in Skill-Lync's Design of Tensile Structures course (paid): lesson 4, Different Types of Tensile Structures and Their Applications; lesson 5, Introduction to Finite Element Analysis; lesson 6, Understanding Degrees of Freedom in FEM. The full course has 59 lessons (23 h 37 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

In the previous session we have seen some historical examples of membrane structures that are already built all over the world and also if a user has decided to go for a tensile membrane structure what is the criteria he has to look into all those things that we have discussed in the previous session. In this session we will understand the mechanism of tensile membrane structures in much more detail and also we will look into what are the different kinds of tensile structures that are possible and also different shapes that are available in tensile structures.

Coming to mechanism, here I would take a very basic example, a thread pulled by, a rope pulled by two persons on either side. To keep a rope in a stable position, tension is the only way actually, without, there is no other form, this rope can stay stable unless it is resting on a table or something else. You have an example of a simple parking structure and over this you have tensile structure. This tensile structure is just pulled to this corner to take its maximum tension. It cannot lose its tension because this membrane is much lesser in length than this steel supporting below that.

So, it may not lose tension. So, it may not lose tension. So, and strength of the membrane is more than a 10 tensile, so it will not even fail. So, that's how tensile membrane structure behaves. Here is another example of a simple conical structure and along this lines, if you are observing, there are cables which are associated with this tent. This cable and similar to that, here there is another cable. Here there is another cable. When you are pulling the cable, the cable takes the tension and there are number of cables around the circumference of this tent. So, due to this tension, it automatically pulls the entire membrane to maximum tension possible.

So, this is how this conical structure is also keeping its tension. And again, another example in the top, this is very beautiful. You can see this membrane is resting over these arches. So, this is another example and here in the edges, you have this member from where this whole membrane is pulled across the whole arch. This is another form. This is another form. So, to have this stability, you need to maintain the complete tension. That is how mechanism of tensile membrane structures work. Now, coming to the shape, here you can see a simple example and we see these kind of structures in real life. So, how does this take this inclined plane, how do we have the stability of any object in the inclined plane?

Now, for example, imagine four people pulling a string laced with a tennis ball as said here and the fifth person is pushing it down. It automatically deflects downwards, right? Because these four persons who are pulling horizontally, so who have an equilibrium, there are three conditions. So, total effects should be, so total sum of forces around, in the x direction should be zero and y direction should be zero and apart from the total moment should be zero. But here, in this example, there is only, all are pulling in the horizontal parallel to the earth. So, sum of forces in x direction is zero.

But y direction are not zero, though there is no any load, so there is no any moment. But to satisfy this sum of forces in y direction also zero, you are, now imagine an inclined roof. And now people are, ball is pulled on the four directions. Even if you are pulling it downwards, it will not move downwards. So, because it has, the ball, the entire structure is now in equilibrium. Let us see, what are the different types of tensile structures. A tensile structure is a structure elements that carries only tension and there is no any compression or bending in that.

A tensile membrane structure is most often used as a roof, as they can economically and attractively span large distances. This type of structure is commonly found in sports facilities, warehousing or storage buildings or even exhibition venues. Some of, some of them may prefer to keep this as an elevation of their buildings. The classification of tensile structures are made on a plane in which tensile forces are acting in the structure. On this basis, tensile structures are divided into following types. So, you can see, broadly dividing, you can divide it as a linear tensile structures and nonlinear tensile structures.

Linear tensile structures are a structure in which all the members are in linear tensile forces. This linear members are supported by the compression members. But major loads are carried out by your tensile members. Common example of these kinds of structures are cable suspended bridges. The main pillars acts as a compression member and but whole load is carried by the cables which are in tension. Even further classifying the linear tensile structures, you can see suspended bridges, draped cables, cable stride beams or trusses, cable trusses, stride tension cables.

All these things are different types of tensile structures. That is linear tensile structures. Now, second type comes with three dimensional tensile structures. Three dimensional tensile structures is a compilation of elements that are primarily in tension with compression being transferred to central mast and down within the ground. Most common occurrence of three dimensional tension can be seen in the sports arenas and usually serve as a roof of these structures. Some of the examples of three dimensional tensile structures are, you can see the bicycle wheel. So, entire wheel is in tension, 3D cable trusses, even tensile structures comes in this category.

And finally, third one which is of more interest for us or surface stress tensile structures, which means this surface is a membrane. Surface stress tensile structures are same as the previous two, but surface members are the tension bearing members here. Fabric tensile structures are great examples for a surface stress tensile structure. So, these can be further broadly divided as a tensile structures and pneumatic structures. Tensile structures are portable consisting of rigid framework covered by flexible subs tensile. Tensile are used in wide varieties of purposes. Even we can further divide tensile structures into three to four categories which we will discuss in further slides.

Whereas, coming to pneumatic structures, these are quite different when compared to tensile structures. These are maintained and stabilized by using air pressure, by filling the air pressure into the membrane. These pneumatic structures are maintained. Whereas, tensile structures, you just see that the entire membrane is in tension like we look in the mechanism part. So, firstly, we will understand pneumatic structures. So, these are air-supported structures which are maintained by internal pressure. So, how do you maintain this air pressure? Here, you can see in the structure. Here, this is Allianz Arena main office in Monash.

So, entire thing is maintained by air pressure. You can see a balloon-like structure over here. Now, you can even change the colors of this one. Now, you can, it is an orange color. But, one thing you need to observe here is, you have cables in between all this. These parallel lines are cables and even these inclined lines are also cable. With these cables, you are having, you are maintaining the shape of the bubble actually. So, the air pressure within this bubble is increased slightly above the normal atmospheric pressure and maintained by compressors or fans.

Air locks are required at entrances to prevent the loss of internal air pressure for this. Air-supported membranes were first developed by Walter Bird in 1940s. And, since then, they have been used in swimming pools, temporary warehouses, and exhibition buildings such that. The same has been applied in pneumatic structure. So, entire, this is a stadium actually. Outer cover is maintained by pneumatic structure. So, this bubble has air inside it and there is an air lock. So, we need to have constant maintenance. See that this air is not loose. If this air is coming out, automatically the structure will not look the same. If the air is loose, this bubble may not look like a bubble. This is how pneumatic structures function.

And coming to tent structures, tent structures are stabilized by using pre-stress. So, this membrane which you are seeing, to have this stability, automatically we need to apply some pre-stress into the membrane to acquire this stability. This is the mechanism for tent structures. But, based on the supporting system, we can further divide these tent membrane structures into five different types. First one is point-supported, and next one is arch-supported thing. As the name speaks, point-supported is membrane structure that is supported on all the edges. Whereas, arch-supported thing is supported by arches, and saddle or roof tensile structures. It just looks like a saddle, and coming to mast, it is a cone kind of structures.

And usually, when you look at major projects or outside tensile structures, usually it might not fall under all these four conditions. It might be a combination of any of two types. In such cases, it can be called as a combination of these types. Let us look at these things in more detail. Coming to point-supported structure. Point-supported structures are used, so this is a simple membrane, and it is supported in one, two, three, four, and five. So, usually, these points structures are supported on all the edges. Usually, it will be three or four edges.

So, when you have cable in the edge, or you need not have it also. Because, when the edge is fixed, and you are pulling, you are applying pre-stress from the edge, from here, if you are applying the pre-stress, then cable is not needed for point-supported structure. Simply, as the name speaks, point-supported structures are supported on all the corner points. In most cases, they are used as a simple roof cover, as you can see it over here. Yeah. Next thing is, saddle-supported tensile structures. These are quite similar to point-supported things.

But, only difference that it has is, there are alternate elevations are maintained to have a better ambience, or a better shape, to have a better shape. Alternate ups and lows can be taken in this, in the saddle kind of support system. And, one thing you can commonly observe in point-supported structures, and saddle kind of supported structures, it has a double curvature here. Here, it does, here, it is not clearly visible, but, you can have a double curvature kind of support. Here, when you, if you are observing, here, it is just curved, right? Oh, here. So, here, it has a concave thing, and here, it has a convex thing. So, the entire membrane itself is, is double curved. That you can observe in, both point-supported structures, and saddle-supported structures. Otherwise, you can call it as an anti-class taker, where we, we also discussed what, what is anti-class taker. That is, you have one curvature on the one side of a membrane, and you have another curvature on the other side of the membrane.

And, here also, while applying the tension, cables are mandatory over here, over this, this structure is a little huge. So, you have cables here, and based on the cables, the tension is applied to the membrane. Next, important type is arch-supported structures. These are the, some of the common kind of tensile structures that you might have observed. In arch kind of arch-supported tensile structures, you have a series of arches that are running parallel to each other. Membrane is supported on the arch, or below the arch, or below the arch. That might be, based on the architectural requirement, and you will be deciding whether it should be, you are running below the arch, or above the arch. So, all these arches, which you can see here, this is a, truss arch, that you can observe over here. But, it can be, normal arch also. So, entire arch is in compression, and, this entire membrane is in tension. If it is a, normal arch structure, it might not come down actually, because, arches are meant to have passage in between, right. So, in that case, this is entirely in compression, and this is in tension. If the sway is expected in the tensile structure, you might be planning for a bracing, so, in that case.

And, arch-supported systems are one of the most common, kind of, tensile structures that are used, most commonly actually. In a plane arch, the arch differences between the thrust lines and the main geometry will produce large bending moments, that in turn produce large changes in the shape, and high stresses in the arch chord section. So, when you have, because of this action, you might have, high stresses in a arch chord. One method is, significantly reduce these effects, is to tie the restraining part, points along the arch chord, to reduce the initial large deformations of the chord.

Because of this mechanism, when there is a high stress, there might be large deformations in the chord too. So, that phenomenon, which we usually, will not expect in the arch behavior, becomes the buckling phenomenon, that needs to be avoided. So, if there is any need, we need to, we need to provide. And, mask-supported structures, are most preferred for public events, or when you have events in a ground. This looks very elegant, all the series of arches, mask-supported structures, will have here in the bottom, you can observe. Every center of each mask, you have a ring over here.

And, this ring is supported by, like, cycle axis, all the internal connections were given by these rods. And, along the membrane, you have, these cables, around the circumferences. So, based on, when the tension is applied into these cables, automatically, this entire membrane will have, will get into this shape. Now, all we understood is, we are applying pre-stress through these cables, to have this shape. But, one thing we need to, what is the complexity in tensile membrane structures is, due to this flexibility, there is a huge, large deformations, during the analysis.

For that, it is not possible. Because, when there are huge, large deformations during the analysis, it enters into a non-linear phase. Understanding the non-linear behavior is very much important. And, even the finite element software does not take care of these large deformations. So, how, how we proceed with the design of tensile membrane structures is, first, initially, we will have to get the stability of the structure, then only, we can proceed with the finite element analysis. Further, there are certain theories, that we will be discussing in further modules too.

coming to this mast-supported system, in between of every mast, you have a pole over here. This pole is supported by a ring, supported by folks over the circumferences. And, from this ring, there are cables run to the corner of each arch. And, through these cables, the pre-stress is applied to the, and they tend to achieve the required shape. And, finally, combination of structures. There is, usually, we don't have one type of, in a large project. Usually, we don't have one kind of support system. Usually, we might use two or three kinds of supporting system.

Here, you can see, the entire project is supported by arches. But, here, there is a flat surface, where it is supported by a saddle kind of support system too. So, that happens. We need not get into those things like, this has to be only a single supporting system. Only thing, based on the architecture, what the architect proposes, based on the architecture, we will be giving the supporting system to any kind of tensile membrane system. So, there are huge possibilities for the membrane structures. So, that's the reason why these are quite famous and non-conventional shapes.

Tensile membrane structures are the best sort of solutions. Yeah, coming to elements that membrane structures have. First thing is a membrane that you will be, How did you define a요 and non-conventional application to the We use the different kinds of fabrics and based on the needs of the user, there are a number of fabrics available in the market based on how much transparency you might need, what is the strength you might need, what is the behavior, what is the color of it, based on all these things, you might choose different kinds of fabrics that you might need.

But mostly available fabrics are, first one is the PVC, which is the most used fabric, PVC coated polyester. So on either side, you'll have a polyester and it is coated with PVC and these are less expensive and lifetime stands around 15 to 20 years. And next thing is, next thing is, next most important thing is, PTFE fabric, which is the polytetra-fluoryethylene. It has around 35 to 40 years of life. This, this is much better than the PVC coated polyester and for a critical projects where durability is the major concern, you'll be going with the PTFE fabric.

These are similar to silicon glass and these are less brittle too. Coming to the third important thing, there is a ETFE fabric, which is just like a glass, it is transparent, which you can see on the other side. Based on the requirement, people are most sought for PVC and PTFE and ETFE kind of fabrics. And next element is cables. In most of the projects, cables are used for achieving tension in the membranes and you can even use beams. So in most arch kind of structures, beams are used to achieve tension.

Whereas, in the other points supported or the saddle supported or mass supported, cables are used to apply pre-stress into the membrane. And next one is base plate. Connection is the most important part in any structure. It may be tensile structure or any other structure, normal steel structures also. Connection is the most important part. So we need to take care of a proper connection. And importantly base plate because the entire structure is tension and there is no any supporting elements on the boundaries too. Only thing that is holding all the tensile structure is base foundation, which is supported by base plate on the top.

And next one is there are specialized hardware for the connections that we need to check before going for the construction part. And bail ring or a membrane plate, which we use in the mass kind of structures. You have seen the ring on the top from which there is a cables run along the all circumference to apply pre-stress into the mass. And this is another thing even you can have a membrane plate. There is any one one important thing here is a during the design of membrane structures.

You can even apply temporary supports if needed actually here. They might not be present in the actual structure, but all this sentences temporary supports are provided. For example, you are going with the arch kind of structure and you need not want to model the entire arch in the membrane design. You can just provide the temporary support system providing the same constraints as a when the arch is provided. One thing that makes sure is a displacement cannot be there cannot have a displacement in the arch. So you can provide the support system with a fixed support so that it will behave the same as a when the arch is available there.

So these kind of temporary supports support systems can also be provided in a finite element software so that we need not model everything. Even the support system is a kind of arch support system. And even the forms which the same slide we have seen in the session too. They are based on the nature how well these shapes are inspired. That is the whole idea there. But here what the idea is now you know what are the different kinds of structures and you can even identify what type of structure it is.

And now what I wish you people can think is how do you achieve these kind of shapes. There are different kinds of shapes. This is a pneumatic structure and this is also a pneumatic structure. And these are all cone kind of structures you can see here. So how do you achieve this kind of structure that this is a thought provoking slide actually here. You can just look at each and every shape and think about it. How can I achieve that kind of shape where do I place my cables and how do I apply my pre-stress.

It's just to think with a more common sense then analytical solutions can be applied. If we have idea of how can we achieve that kind of shape. Next one there are common misconceptions that fabric structures cannot sustain heavy weather conditions. And for this this is an incorrect statement and for this there is a life proof that while explaining the jetta airport I have also explained how weather is managed in the structure. One thing is that when there is a larger heights in any building it usually reduces the temperature and it will have better cool temperature even though it is very hot outside.

Here in the picture you can see that out of 100% of the sunlight 73% is reflected only 7% is coming outside coming inside. Whereas all the corners were not obstructed it is just a roof so that there is sufficient lighting into the structure. That is one thing and people also think that fabric it is just a fabric so that it is a cloth one can even tear the cloth and it cannot even stretch. All these misconceptions are there that is not possible it is a length of the tensile fabric is around maybe 10 tons which is very high.

So but there is no any proper code stipulations for the reason of tensile structure hence we usually consider very large safety factor for that part. And coming to life of the tensile structure tensile membrane in you know you use a PVC fabric. If you are using PTFE it will have a minimum life of 35 years. Thank you for listening. That is all for this session. We shall continue in the next session. We shall continue in the next session. Thank you.

Want the rest of Design of Tensile Structures?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full Design of Tensile Structures course

The remaining 56 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full Design of Tensile Structures course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.