Lesson finished
Unlock all 59 lessons of Design of Tensile StructuresFull course ₹40,000 · paid
Landmark Tensile Membrane Projects and Nature-Inspired Shapes
A free lesson from Skill-Lync's Design of Tensile Structures course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Evolution and Structures of Tensile Membrane Architecture”
What will you learn in this free Design of Tensile Structures lesson?
The instructor walks through a timeline of built tensile projects: the Jeddah Hajj Terminal, Pier 6 Pavilion, Millennium Dome, Denver International Airport and the pneumatic Allianz Arena. The lesson ends on how architects take form ideas from nature, including Zaha Hadid's opera house and Frank Gehry's fish sculpture.
- Jeddah Hajj Terminal's conical Teflon coated fabric roof
- Millennium Dome's 12 masts, 100 m height and 365 m diameter
- Allianz Arena as a pneumatic structure
- Nature as a source of stable shapes
What comes after lesson 3?
Later in Skill-Lync's Design of Tensile Structures course (paid): lesson 4, Different Types of Tensile Structures and Their Applications; lesson 5, Introduction to Finite Element Analysis; lesson 6, Understanding Degrees of Freedom in FEM. The full course has 59 lessons (23 h 37 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
In the previous session, I have introduced you the tensile membrane structures and the basic difference between water tensile structures and how cable tensile structures looks like and how membrane tensile structures looks like. And apart from that, we also understood the basic behavior of tensile membrane structures. Apart from that, I also covered these advantages, how it has evolved the history. The main two men who contributed to tensile membrane structures that are standing today are Vladimir Shukawa and Friotov. And we have discussed the famous how they have contributed and what led to their contributions also has been discussed in the previous session.
Coming to modern tensile structures, there is a lot to learn. So, to know this model tensile structures, I will give you a timeline and a few remarkable structures that has come in this timeline. Start with Jeddah Airport, which was built in 1977. This is a Hajj Terminal, which was planned for religious pilgrims that are in Saudi Arabia. The project was designed by Skidmore Ownings and Maril. This Hajj Terminal officially inaugurated in 1981. It was purposely built for the influx of religious pilgrims that stream into Saudi Arabia during this period to reach to Mecca.
With the advent of these jumbo jets, which was during that period, 1970s and 1980s. With the advent of those jumbo jets and government subsidies schemes, previously it used to be around 50,000 pilgrims. But every year there would be around 5 lakh pilgrims by 1975 itself. So, they are thinking for a better solution that can accommodate a lakhs of pilgrims. That too, this entire necessity will be only for a week throughout the year. So, it should be able to accommodate those numbers. So, the design team realized that the facility would need to be able to accommodate between 80,000 to 1 lakh pilgrims at a time.
For up to 36 hours stay, both on arrival and prior to the departure. While documents were processed and onward transportation is arranged. To make this challenge, the design team conceived an open-air facility sheltered by concrete shell structure. But it quickly became apparent that the harsh desert climate required a more innovative solution. Instead of concrete, the team settled on a teflon coated fiberglass fabric, which you can see in the picture. All this white color thing is a fabric, that is a membrane, in other words you can say.
This fabric reflects 76% of the solar radiation. Maintaining a comfortable stay even outside temperature is 80 degrees or so. Under this tent structure, even when the temperature outside is 80 degrees, allows about 7% of the sunlight to pass through. So, very good ventilation is always there and reduces the heat that is there outside under this tent like structures. Originally, even in the history, when it was preferred by Romans or nomadic tribes, it was also one of the reason. It reduces the heat and the shape also is advantageous when you are preferring tent like structures.
In addition to this maintaining a comfortable environment, the facility had to meet all the needs of the pilgrims during this long wait. It is almost 36 hour wait. So, people should be having different kinds of facilities such as, in addition to the restaurants and cafeterias, the design also included provisions for cooking areas for pilgrims. Most of the pilgrims might be poor and they wanted to visit the place at any cost. So, there is a cooking facilities also available in the airport itself. Also, there is abduction facilities for cleaning processes prior to 5 daily prayers, which is according to their religious activities.
Spaces for changing their ritual garments, seating that can accommodate napping and even market spaces where pilgrims can sell goods. They have brought with them to help fund their trips. The facility is broken into, the entire airport facility is broken into two halves on the other side of the central roadway, which you can see in the picture, for the buses and taxis that transport pilgrims to Mekong Road. Each of the two buildings is composed of five equal modules. The width of each module is based on the space required to park two Boeing planes.
You can even see the planes in the picture. After completing arrival formalities, the pilgrims emerge into open air tent structure. Each building module comprises of 21 conical fabric tent segments. You can also observe the conical segments in the picture. In the picture, 150 foot tall tapered steel columns from the 150 foot square grid. The corners of each segment start at 66 feet above the floor before raising to the steel ringed oculus 110 feet of the floor at each peak. So maintaining such heights will reduce sunlight a lot.
Even when we observe the major constructions also, when there is a larger floor height the temperature will be reduced. Though strikingly modern in appearance, the tents allude to both vernacular nomadic dwellings in Arabian Peninsula and to the tents that house pilgrims in Mena Valley on their way to Mecca. So giving this modern look, it also serves the purpose of giving a value to the religious thing also. Upon its completion in 1981, that building was celebrated around the world. It also received an AIA National Award and Progressive Architecture Award as well as Aga Khan Award for the architecture in 1983.
In 2010, the Hatch Terminal received AIA 25 year award in recognition of the structure's lasting accomplishment. Even after 25 years, the efforts put into this project is recognized. After 1979, next project will be 1981, which is a Pier 6 Pavilion, which is in Baltimore. It is a music venue located in Baltimore, Maryland, which is a state in US. The waterfront venue is located in the Pier 6 of Inner Harbor and opened in 1981. The venue is a temporary structure known as Harbour Lights Concert Pavilion with a capacity of 3133.
In 1990, the city of Baltimore enlisted future tents limited associates to create a permanent structure. This contractor has took up the project and made this tent-like appearance. So, an advantage you always have when you are planning for a tensile membrane structure is you can always have a longer span. The pavilion is within walking distance to more than 4,000 hotel rooms and dozens of museums and attractions clustered around the inner harbour, such as the Harbour Place, the National Aquarium, Maryland Science Centre, Power Plant and Power Plant Live and Harbouries.
These are all the popular places which are around this recreational centre. During that time, the structure has got huge attention. It sets a unique appearance with a tensile roof structure built on a concrete base. The existing pavilion has six masks. You can even see all the six masks over here. This cone-like structure is called a which you will be learning in further slides as well. The teflon-covered nylon roof is used for this project. And these are, you can even see the cables over here, which the lines in between this one.
Lines you have, which holds the tension. The tension which you are applying will be given through this cables. The cable in turn gives the tension to the membrane. That's how actual mechanism of the tensile membrane structure works. So, this backstage facility also includes dressing rooms, green room, production office and catering room. All kinds of modern amenities that were needed for a recreational facility. After 1981, you can see the picture in the right, which is the headquarters of the Imagination Organization. The beauty of this project is they have converted a old school into this beautiful structure.
The school name is Old Victorian. This old Victorian school building is converted to beautiful headquarters of a Imagination Organization. This striking conversion of a Victorian school is one of the most ingenious and landmark buildings of 1990s. That's how cool it is of course. So, let's get into account here, that autism will Tensile fabric roof covers a sympathetically restored facade. You will understand what a facade is, whatever, if you have a building, whatever material you are using to cover the exterior of a building is called a facade. We will discuss more number of examples in the coming slides to understand better what is a facade and how do you use them and all.
So, this initial tension fabric roof covers a restored facade into a character which is bringing the building into a modern age. So, this old age, using this fabric, so entire five floors is covered with this fabric. Behind this original six-storied red brick Victorian school lies, say, imagination building, stretching back to include what was one, say, whole street and another five-story building behind. So, also, one more important thing which you can see is, here you have a understructure which was beside. The gap between these buildings is also filled with a unique tensile roof canopy, which has become the symbol of the imagination group and their approach to the design.
So, the name says, this structure has added value to the name of the structure itself. And the roof itself creates an atrium where each floor is bridged by steel and aluminum walkways and fabric diffuses life to form a delicate glow into the interior of the structure. It gives a very good ventilation to the structure as well. Also, the traditional exterior of a red brick school building provides an intriguing with the contemporary architecture of a roof and atrium. Best experience in person, the atrium is working environment during the daytime, but is transformed into a magically lit and beautifully set in space after dark.
By creating a five-story atrium space and penthouse gallery, the fabric roof of imagination provides a living remainder of an archigram legend, Ron Heron, who is the architect of this structure, actually. The playful and flooded with soft light, the atrium space is the centerpiece of this building, which has been described as one of the greatest spaces of contemporary architecture. After 1990, I have one more example from the same place, Baltimore, which is in 1998. The center is situated in Baltimore, Maryland. It was built in the year 1998.
Columbus Center is the headquarters for the University System of Maryland and home to Institute of Marine and Environmental Technology. The center serves as a collaborative hub for economic development among USM, IMET, and private industries. The Columbus Center community is comprised of USM faculty and staff, private entities. It's a commercial center in short. This Columbus Center is architecturally striking of 250,000 square foot multifunctional facility in Baltimore. It has three large open exhibition halls with great views of the inner harbors. It is a hub for Maryland's blossoming tech startup culture and offers prestigious office spaces, vet labs, meeting rooms, and inspiring event spaces.
There are 95 office spaces for lays in the inner harbour neighborhood totaling to 6,80,224 square feet that are available in this space. Over the years, they have hosted a wide variety of small large events for businesses, nonprofit organizations, and community. So this commercial space has gained its own importance with time as well as the structure has added much value among the startup culture as well. After 1998, 2000, the structure itself is named after the year. The structure itself is called a Millennium Dome. The original name of the large dome-shaped building used to be just a dome, but to have a millennium experience, it is called Millennium Dome, a major exhibition celebrating the beginning of the third millennium.
It is the ninth largest building in the world by usable volume located in the Greenwich Peninsula in southeast London, England. The exhibition was opened to the public from 1st January, 2000. The dome was one of the largest of its type in the world. Externally, it appears as a large white mark with a 1200 meter high yellow support tower. So you can see in the picture, it is a, you can, all the 12 of the towers are evident. And at the same time, this huge white mask is also visible.
Each hover of the clock face representing the role played by the Greenwich Mean Time. The place and number of mass and what is the diameter of the structure, everything plays an important role showing adding value to the structure. The architect of this structure is Richard Rogers. The building structure was engineered by, and entire roof structure weighs less than air contained within the building. Although, referred to as a dome, it is not strictly one as, as it is not self-supporting, but is in fact, a giant big top, the canopy being supported by the dome shaped cable network from 12 king posts.
For this reason, it has been disparently referred to as a millennium tent. The 12 posts, the yellow posts, which we explained to you earlier, represents the 12 months of the year, another reference of the time in its dimensions alongside its height and diameter. Its height is 100 meters, which is representing the millennium, and its diameter is 365, which is representing the number of days, and the 12 mass, which represents the 12 months. And Greenwich, the place, which it was constructed, is Greenwich, which is the standard time that we consider for our time.
This is the most important, lot of parameters, which is considered for the project. This is a project of millennium in short, we can describe it as. After that, in 2005, we have two very important structures, which you can see here. First thing, we'll be discussing as Denver International Airport, which is the 20th busiest airport in the world, and the 5th busiest airport in the United States, with 69 million passengers traveling through the airport in 2019. Denver International Airport is one of the busiest airline hubs in the world's largest aviation market.
In 2007, Denver International Airport was 11th airport in the world by passenger traffic. 1,06,000 passengers travel daily, 15 daily traffic of aircraft, 1,650 flights. There are 23,000 people that work in an airport itself. It is one of the largest airports in the world. Why I am mentioning all these statistics to let you know what is the scale of the project it was. So, by the picture, you may not even, it's a very long shot, you may not understand how big this structure is. So, that's the reason why I am mentioning these statistics to you.
The project began in 1989 by Perez Architects and was completed in 1995. Although the original budget was 1.7 billion dollars, due to the structural problems, the budget was increased finally by another 5,000 million dollars. So, the entire project was built in the area of 140 square kilometers, forcing move an amount equivalent to one third of what we needed to evacuate. To have an estimate of the area of this one, for example, in any major city of India like Hyderabad or Chennai or it might have around 7,000 square kilometers.
The airport itself was built in an area of 140 square kilometers. And it was, while newly building, it was planned away from the city to avoid this traffic and disturbances of the city, which is around 40 kilometers away from the city. Aesthetics, the tents, which you can see here, white tents, which represents the snow that is falling in the area, which represents this area. Besides the airport, you have a huge mountain and a beach, a lot of snow falls on that. So, this structure represents the importance of the area as well.
Next one is Allianz Arena, which is a football stadium. Unlike the earlier structures, which are all tent-like structures, this structure is a pneumatic structure, which is a Though again the entire structure is maintained in tension, so this tension is not maintained by pre-stress. This structure is maintained by pressure, which is the air which is filled into all these panels. So that's how pneumatic structures were done. This project was designed by Swiss Architects, offers space for 66,000 spectators, equipped with a range of gastronomic and themed experiences, a daycare center, shops selling from farm merchandise, office conferences, rooms as well as patch media area.
It also feels like a small town. Some of the features it has is a smooth exterior with a diamond-shaped translucent cladding, membranes on the roof and exterior are self-cleaning, continuously ventilated and weigh only 30 of the amount of glass weighs. This translucent exterior can be lit up to 4,000 specially developed red, blue and white lights. Now in the picture, what you can see is the red color. Since this membrane is translucent, which can allow the light to pass through, you can even change the colors, which now it is showing red, you can even change to white or blue, too.
In the night time, even white looks very elegant. So, till now, till now, we have discussed a couple of examples, some tent-like structures and a few pneumatic kind of structures and one question that comes to mind is, where do these architects gets the imagination of these structures or shapes? Here, you can see, you can see many kinds of shapes. This is a cone-like shape and these two are again might be pneumatic structures. So, there are different kinds of shapes available. So, how do they decide this shape would be beautiful or even though after deciding the shape of the structure, how do you get the stability of that shape?
That is the whole idea of tensile structure. There is no limit for the imagination of an architect. Once, if an architect is able to imagine a kind of shape, as engineers, we should be able to get the stability to that shape. And in this course, we will, whatever the shape it is, how do you attain that kind of shape, that will be discussed along with that. How do you attain stability for that structure and how do you perform the structural analysis of this structure will also be discussed.
So, also one more thing, here in the right side, you can see grass. So, from this grass also, you can imagine a shape and you can come up with a structure from this gas also. Nature is the biggest tutor for us. We need not take shapes from just thinking. You can even look at the nature and you can observe things from the nature. And nature, as discussed earlier, nature has evolved around about thousands of years. All this evolution has given them the perfect shape, which is more stable than any other thing an architect can imagine.
So, nature is the biggest tutor. So, observe the, by observing the nature itself, we can come up with many shapes. And just like that, then we can think of how, how to get a stability for this kind of shapes. And in this slide, I'm trying to show you how few architects has taken inspiration from the nature and how they have created a beautiful structures from, from their imagination. First one is, the architect is Zaha Hadid, which was, he built an opera house. The house looked like just a pebble, even when you are going to seashore, when you can see the pebbles in the seashore.
You can imagine, this architect has got an imagination from this pebble and he has constructed a structure like this. This structure is in, is an opera house, which was in China. The opera house is a heart of Ganso's cultural department development. Its unique twin boulder design enhanced, enhanced the city by opening it to the Pearl River, unifying the adjacent cultural buildings with towers of international finance. This design evolved from the concepts of a natural landscape and fascinating interplay between the architecture and the nature, engaging the principles of erosion, geology, topography.
It is also influenced by river valleys and the way in which they are transformed by the erosions. The fold lines in the landscape define territories and zones within the opera house, cutting dramatic interior and exterior canyons for circulation, circulation, lobbies and caves, and allowing natural light to penetrate deep into the building. Smooth transitions between these disparate elements and different levels continue with a landscape analogy. Custom molded glass fiber reinforced ship some units have been used for the interior of the auditorium to continue the architectural language of the year, fluidity and seamlessness.
So the entire structure was inspired from a, from natural things. And next one is, in the right side, you can see the fish-like structure. You can, by seeing yourself, you can understand it's a fish. It was the structure built for the Olympics. It was designed by a Canadian architect Frank Gehry. The fish statue was built in, built for 1992 Barcelona Olympics. The gold colored steel structure serves as a canopy for a casino and a restaurant, which linked the luxurious hotel arts to the seafront. This glittering mesh, it's, it's just a, just a mesh.
And in, in between it is all empty. This glittering mesh sculpture, anchors a sweeping expanse of a beach that stretches up to the fanciful sail shape of a trendy hotel in one direction. And on the other direction, it has a Port Olympio, where Olympics happen. As it faces the Meridian Sea, the open mouth looks like it is ready to leap back into the sea here. The piece sits in the Port Olympic at the base of the largest skyscraper, one of the tallest buildings during the time of the Olympics.
This structure was commissioned to build the piece for 1992 Summer Olympics, which were held in Barcelona and brought the city to the attention of the world. It faces the sea and measures 35, 35 by 54 meters. So width of 35, 35 meters and length of 54 meters. It was made with the stone, steel and glass. And the next example is, the structure itself is called Kunsthaus, which was built in Graz, Austria. This is standing in a sharp contrast to more traditional historic architecture of Graz. So you can see in the picture, this structure looks very much modern, but the structures, whatever the constructions that are around it, were more, more traditional.
This city is known for its traditional culture and it represents the traditionalness of the entire country. But the architect imagined to have a most modern structure in this kind of a city here. As if it looks like a giant daemon in between the city. This modern, this was a museum. So this modern museum was built in 2003, during the time when Graz served as a European capital of culture, a roving honor that is awarded to a different European city each year. Rather than to install another bland box among the lovely aging buildings of the city, the designers went in the completely opposite direction, giving a building a more rounded, organic look.
It also managed to look completely otherworldly. The gleaming surface of a museum is also embedded with nearly around 1000 fluorescent rings that can be programmed to create different patterns, making the building even more spectacular, strange, during the right time. And apart from that, the entire structure was installed with a solar panels, which makes it more self sufficient and energy like actual living being. And the idea of this structure is the thing what we are discussing now is a structure shapes can be inspired from the nature itself.
The first one looks was inspired from a sea and topography of geology. The second one from fish and third one, it looks just like a heart actually. It is a heart and all these things are looks like a valve and whatever the solar panels that you have around the entire structure makes it a self-sufficient and actual living thing. That was the whole idea and the last example, which is a bird nest in Beijing. It is also designed for the Wallampics. This Beijing National Stadium was designed by Swiss architects. The requirements for this design were, it had to be inspiring and be able to withstand an earthquake.
That is another requirement. Apart from that, it should also represent the Chinese culture. So, these are the three requirements that the structure has. In order to make structure lightweight but earthquake-proof, the strength in 110 tons of new grade of steel, the purest ever developed, is developed in China. Because, for this structure alone, they have developed a different grade of steel that could withstand earthquake. So, making it lightweight at the same time, it shouldn't add much weight to it. It is like steel, of course. It is a saddle-shaped but interlocked steel plant resembling a lattice of twigs making a name of a bird nest more suitable for the structure.
Construction of this structure has began in 2003 and completed in 2008. The total cost was estimated to be $423 million. Next thing is, now that, why all these things has been explained is, for a tensile membrane structure, you don't have any specific kind of shape. So, it can be inspired from any shape. The beauty of tensile membrane structures is, one prefers the tensile membrane structures when they are very much specific about the aesthetics of the structure. So, let us say, one has already decided to take a built-8 tensile membrane structure. So, what are the parameters that needs to be considered for taking a right decision and what kind of fabric it has to be used, what kind of support system it has to be, it has to be, and how many pillars, all these things.
So, before taking the decision, you need to understand what are the parameters that are affecting to go with the tensile membrane structure. First thing is, shape and ears. The shape, you can have any kind of shape as discussed earlier. Based on the shape and one needs to have this stability, you can have conical shape, you can have saddle kind of shape, you can have barrel wall kind of shape, you can have conical shape and you can have hyperbolic parabolite shape. All these things, any kind of shape is possible. Only thing is, you need to apply tree stress in the right direction to achieve the shape.
That we will be discussing in this course anyway. And one more thing that needs to be considered is, what is the purpose of the structure? So, for what, you are just making a outdoor event area or you wanted elevation in front of the organization building. So, based on the use, again, for example, you need to have around 50% translucency from the membrane. You will be choosing the right membrane for that. There are different kinds of membranes. So, this use can be another parameter for that. And apart from that, foundations will be another parameter. So, for the foundation, there are two things, whether the structure is supported from the ground or it is supported from the existing structure.
If it is from the existing structure, how do you support from that? What is a, is it a steel structure and you can directly weld it from, from there? If it is a concrete structure, how do you make it, make it as a monolithic connection? This design of connection is very much important. So, based on that, if it is from the ground, you need to design for the forces, what it is coming out of the foundation. And if it is from the structure, you need to analyze the structure before putting up the force, this connection into the building.
If restrain the forces that is coming from the membrane structure, that will be a huge problem. Next important thing is location. Before moving forward with any build, it is advised to have a complete assessment of the proposed building location to ensure that all safety standards are met. From staff engineering reports to through complete field measurements, every aspect of the property shall be analyzed from head to toe so that you can make sure that building location is a viable option to tensile structure. You would like to assemble. But meeting these standards, there, there could be a problem.
For example, you are building in a structure, most snowy area and you are, you are not even considering the snow roads into that. So all these things again matter. If it is a normal country like India, snow road doesn't matter. So what are the roads that are coming onto the structure? And again, if it is a prone area, whether you are considering the earthquake forces for the design, all these things. Again, if it is a terrain area and there is a lot of wind gushing into the place where you wanted to build the structure that wind loads are very much essential and one needs to take care of that.
So location is one more important criteria for designing the structure. Next thing is fabric specification. There may, some may think that it's all right to go with the most cost effective materials for their building. They must also closely consider their own unique needs and whether, whether or not the materials at that, at their price point will meet those constraints. Factors like weather or for example, have the potential to warrant much more expensive material. For example, you wanted to make a largest spans and if you are using the very cost effective material, it may not last that much longer spans.
So that is again another reason before selecting the fabric specifications, there are many reasons. So what is the fire rating of that? What is the light transmission that is coming from the fabric? Because for some structures, they need a light transmission through the membrane. For a few, they, they prefer opaque membranes. That's the reason that is again another thing and what is the durability of the structure? What is the color? Some prefer only white. There might be maintenance issues. So some might prefer different colors. So it depends on the user actually.
And what is the flexibility? What is the cost of the fabric? All these things come into picture when you are selecting with different fabric. Next thing is water management. For a year, if the structure is like a tent like structure, it will automatically have natural elevation into the structure and the water will come down. But how do we manage this water? It should not fall on the people. These water management should be properly incorporated into the structure. And coming to next, the most important parameter, which is the cost.
This is the parameter that affects most actually. These tensile structures, while less expensive than the conventional roofing fixtures, still have a budgetary constraints that buyers should consider. They have a very huge range of membranes, huge range of cost that membranes are available based on their capabilities. One needs to check with all those things and he needs to match up with what requirements he is looking at. It's like everything from overall size of the structure to the materials being used that will impact the final cost. These sheet structures are certainly not for the typical private residence.
Thank you for listening. That's all for this session. We shall continue in the next session. Thank you. Thank you.