Lesson finished
Lesson finished
Lesson finished
Lesson finished
Unlock all 12 lessons of Automotive Lighting Design using CATIA V5Full course ₹40,000 · paid
Lamp Regulations (ECE R Series) and Master Product Structure
A free lesson from Skill-Lync's Automotive Lighting Design using CATIA V5 course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “3.0 - Basic of Lighting & Software overview Part 3 Seg 1”
What will you learn in this free Automotive Lighting Design using CATIA V5 lesson?
The instructor explains vehicle classes and the ECE regulation numbers, then lists requirements for front, side and rear lamps such as unit count, colour, mounting width and height, and visibility angles. A middle section builds a master product structure in CATIA for a parametric tail lamp model.
- Vehicle classes M, N and O and ECE R numbers
- Unit count, colour, height and width limits per lamp
- Inboard and outboard visibility angles
- Master product structure for a parametric tail lamp
What comes after lesson 3?
Later in Skill-Lync's Automotive Lighting Design using CATIA V5 course (paid): lesson 4, Basic of regulation & start of making Lamp Part 1 Seg 1; lesson 5, Basic of regulation & start of making Lamp Part 2 Seg 1; lesson 6, Basic of regulation & start of making Lamp Part 3 Seg 1. The full course has 12 lessons (21 h 37 min of video); see the course overview or its price and syllabus.
Lesson transcript
Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.
Part 1
Hi, in this week, we're going to learn about regulations and its function. As you know, the lighting is something which is related to the safety of pedestrian and the driver at the same time. So, what are the points which we have to make sure whenever we create the light or whenever we are designing something, we have to follow some kind of regulatory point. So, in this entire week, we're going to learn about few points, not in the depth, but yes, whatever is required to meet or fulfill the regulation points, we will going to learn about that.
In initial videos, I have explained something like if person is coming at 45 degree, how your vehicle will be visible and how it is related to the safety. So, I am going to teach you a few points or key points of regulation, which during the modeling, you should be taking care of. In coming videos, I will teach you how you can utilize this point with your 3D drafting or 3D modeling. So, you will understand the regulation points and its function. This is going to be a theory part, but you have to make sure that each and every point will be well understood by you.
Otherwise, at the time of modeling, you will be stuck in between. So, let's start with the vehicle classes. So, we have certain classes for vehicles where M1 stands for car up to 3.5 ton and up to 9 passengers. What it means? If a car having a weight of 3.5 ton and it is having a 9 passenger sitting, then it falls into M1 category. In the M2 category, if 5 ton is the weight of car and having a 9 passenger capacity, then it falls into M2 category.
We normally work with M1 and M2 category and M3 sometimes. However, for the N1, N2, N3 and N3G categories are for the transportation vehicles. Alright, but I will explain all the things to you. In M3 category, the car weight increases to the 5 ton and the passenger will be more than 9 passengers. In the M2 category, we have the weight of 5 ton also, but it is up to 9 passengers. While in M3, it is 5 ton but more than 9 passengers. N1 category. In N1, vehicles for transporting freight up to 3.5 ton. In N2 category, weight is more than 3.5 ton up to 12 ton. In N3 category, the vehicles for transporting, it is more than 12 ton.
And what is N3 category? It is off-road vehicle like THAR. So that comes into N3G category. There are certain criteria for each and every categories, but we will mainly focus on M1 and M2 categories. There are special trailers which falls into O categories. So O1 is up to 0.75 ton and if it is having more than 0.75 to 3.5 ton, it will fall into O2 category. O3 is something where from 3.5 ton to 10 ton applies and O4 is where more than 10 tons is applicable. So this is the regulations which will be applicable for any lighting industries.
If you wanted to be a pro or if you wanted to touch the sky, then you should be aware of all of these regulations. There are multiple regulations and in this particular regulation like R3, there are more than 50 clauses are there. It's very difficult to remember all the things. So there are agencies who deal with these regulations. Their work is to maintain and check these regulations on a daily basis. If any update is coming or any changes is happening or any revision is there, they will update to their customers.
But for an engineer or for a lighting designer, there must be some of the points which they have to keep in their mind while designing the model. And few checkpoints are there which we can do at ourselves in the design phase or in the drawing phase. We will talk about that later. Here ECE is for the Reflex Reflector. In initial videos, I have explained the functions of the lighting. If you are not aware what are the functions, just go back and check out that video again.
So what is Reflex Reflector? I am not going to explain here in detail which I have already explained in initial videos. So you can check that video. In R3 category, the Reflex Reflector is false. What does it mean? For the Reflex Reflector, R3 category is applicable. When you go for any interview, these are the must questions that the interviewer will ask to you. So if you are working on a tail lamp or head lamp, the functions-wise regulations are there, which you are seeing on the screen.
So you have to be aware what type of regulations applicable for the particular function. For the registration plate lamp, the R4 category applies. For the direction indicator, front, rear and side, all type of direction indicator, not just one, all type of indication where a person is giving a signal to the user that he is going to make a turn that falls into R6 category. It is time taking guys. It is a theory. I know a bit boring. It might be, but this is very important because this is related to the safety and you have to be known this regulations.
Now coming to the next, position lamp, tail lamp, stop lamp, and clearance lamp. This all falls into R7 categories. Soon when you will be very much familiar with the lighting and by designing the model, I will again explain this regulations. So you will be remember all the time. For now, you just go through it and I will explain one by one and in the details video where we gonna make a tail lamp. In that video, we will explain the same thing again with the function-wise and what are the key points.
The fog lamp. The fog lamp will fall into R19 category. The reversing lamp or backup lamp. When you are taking a reverse, the light will be shown, so that light will fall into R23 category. The rear fog lamp. The rear fog lamp. Which helps user to show his vehicle position into the fogging condition that falls into R38 category. R48 I will explain later. R77 is for the parking lamp. Front and rear. The daytime running lamp. Which we already talked about. In the daytime it will run. So it is called daytime running lamp.
It will help. It will help user or driver to see the road into the fogginess. So R87 is applied for that. Side marker lamps. R91. ECE R98 is for xenon headlamps. ECE R104 for contour markings. ECE R112 is applicable for halogen lamps. R119 is for the cornering lamps. And R123 is for AFS. And R123 is applicable for AFS. That is adaptive front lighting system. Now coming back to the R48. It is for the installation and uses. We will gonna learn about R48 in this session. So R48. So R48 is applicable for lamp mounting on the vehicle. Not for the functions. So function wise is also defined into R48. However for lamp mounting into the vehicle. It goes into the R48 categories.
Now let's see. Now let's see. How this regulations. Are having some dimensions. Or what are the key points. Which we should keep in our mind. While designing the lamp. I have noted down some key points. And some of the dimensions. Which are required. To meet the regulations. So here. First. In this session. Current session. We gonna talk about the. Front side lighting. Not for the rear side. So front side lighting. Is having. Low beam function. High beam function. The DRL. The front fog. Cornering lamps. So those. Regulations. Or the functions. We gonna talk about. In this session. As I said. R48 applies. For the installation purpose. For each and every function. So here.
We are considering. We are considering. R112. And R48. For the low beam function. It is. Mandatory to have. The low beam function. In all vehicles. Yes. It is mandatory. The presence. Means. If it is mandatory. Or not. Or it's an option. So. It is mandatory. To have. All type of passenger. Car classes. That means. M1. M2. M3. G. O3. Whatever. Whatever. Classes are there. It is mandatory. To have. This. Low beam function. The numbers. Two units. Are required. Color. Color. Color is defined. In R48, it should be white. It cannot be yellow or pink or green or something like that. It should be white. The position and width. What does it mean? There are certain dimensions has been defined to fix this low beam function into the vehicle.
For an example, here you can see the maximum condition has shown its 400 mm. It is considered from the edge of the vehicle, the extreme edge of the vehicle. From that extreme edge, you should not go beyond the 400 mm for the installation purpose of low beam. And later on, when we design the lamp, then we will understand it very clearly. However, for now, you can think as a maximum condition is 400 mm for low beam function from the extreme edge of the vehicle. The minimum clearance is required 600 mm in between two lamps. Now, the thing, it might be coming in your mind from where these dimensions are coming or why it is 600 mm, why it is not 500 mm, or 700 mm, or why it is not 400 mm, or 300 mm, or 200 mm. So, after so much of experiment, the Economic Commission of Europe has found out that this dimension are meeting their criteria.
Meeting means this, the dimensions are not impacting on pedestrian safety and at the same time, it is helping driver to run the vehicle. For an example, if I move the 600 mm to the 400 mm, what will happen? The light intensity will increase because at a certain distance, you will not able to see two lamps are there. Like that, they have experiment and they have defined this 600 value. If it is too far, then also, it will be an issue for the driver to see the road because if it is too far, then the middle zone will be dark zone.
So, it might be possible that at the middle, some animal came or stone came and the road condition is not good and you are not able to see it, the accident may happen. So, after that experiment, they have defined the 600 mm distance is required. For each and every dimension, for each and every dimension, like that, they have think out and they have mentioned this dimensions. Position in height, and here you can see the minimum 600 mm. Before that, let's finish this position in width. So, maximum 400 mm from extreme outer edge of the vehicle.
600 mm between the two lamps of low beam and hydrogen. Minimum 400 mm if the total vehicle width is less than 300 mm. Not applicable to M1 and N1 category vehicles. So, this is, they have mentioned clearly that this may be applicable for the Trollies and O2 category lamps. This is not applicable for the M1 and N1 category lamps. This 600, they have reduced to 400 and if it is, very less. So, you can see how they have think out. If it is less than 1300 mm, then the distance between two low beam functions should not be less than 400 mm.
Now, let's talk about the height. In the same fashion they have think out here, they have also checked at what position they have to keep the height. If the height is more, then it may impact the pedestrian eyes. Pedestrian will have more focus on his eyes. So, it might be possible that the accident may happen. If the position is too low, then the distance of light will not go much on the higher side. So, the driver will not able to see the road properly. At a certain distance, if you are turning on the low beam, you are able to see nearby roads. If you are turning on high beam, then you can see the distance road.
So, here they have defined the height, how much height they have to keep and what is the maximum and the lowest height for the low beam function. So, we have 500 mm as a minimum height and 1200 mm for the maximum height. And for N3G vehicle, they can go up to 1500 mm. Now, let's talk about the visibility. What is visibility? Visibility means if lamp is mounted on the vehicle, there are certain angles on which light should be get spreaded. So, horizontally, 10 degree inboards. What is inboard? If we have right-handed drive. In India, there is a RHD, that is right-handed drive. We drive with the right side.
So, for us, inboard will be left side. For us, inboard, that means is inboard of the vehicle. It is going inside of the engine side. So, you just think about you are sitting on the driver's seat and you are raising your left hand and then just bending 10 degree. So, that is the inboard angle. If you are sitting on the driver's seat, in India only, I am talking about in India because we have right-hand drive. If someone is asking what is LH and RH, left hand and right hand and how you can define this is a right-hand lamp or left-hand lamp.
Just sit on the driver's seat and if it is the right side lamp, then it is a RH and if it is left side lamp, then it is LH. This is how you can define the lamp side. So, outboard means if we are sitting on the driver's seat and raising your right hand and just turning on the window side, 45 degree, that is the outboard angle. If you are sitting on the driver's seat and raising left hand and turning it the co-driver side, then it is an inboard angle.
In the same way, vertical and horizontal. The downwards and upwards. If you are sitting on the driver's seat and raising your hand upside, then it is upward. If you are raising your hand on the downside, then it is downward. So, this is the inboard and outboard, upward and downward. This applicable for all the functions. This term will remain same and concept you should understand for the inboard and the outboard. Now, for the visibility point of view for the low beam, we have 10 degree inboard and 45 degree outboard.
Vertically, we should go up to minimum 15 degree and for the downside, it should meet 10 degree downboard. Coming to the next, electrical connections. The low beam may remain on when the high beam is switched on. What does it mean? If you are turning on the high beam, it may possible that the low beam should remain switched on. There is no regulatory requirement that the low beam should be turned off. I will explain this later, how it is related and what is the use of it.
Now, tell-tale, that is optional. Coming to the next, other regulation. What are the other regulations are applicable? That is, automatic labeling must be installed with the LED lamps. If the headlamps are equipped with the light source, more than 200 lumens, usually for the xenon. This we already learned in initial levels. I have shown one chart. If you have the halogen lamp, then how much meter and how much intensity with the voltage you can go. So, using of that chart, you can think out in this way. Automatic labeling should be there with the LED light source.
If LED light source are there, the automatic labeling must be installed. Automatic labeling and headlam cleaning system needs to install. This is a regulatory requirement. You have to install the cleaning system and leveling system. What is cleaning and what is leveling? This we will talk about in the later sessions. Two additional cornering lamps are optional. Here they have clearly mentioned, in the first one, you can see the presence. It is mandatory. But, here they have added one clause that two additional cornering lamps are optional. If you wanted to add, that you can add. There is no restriction.
But, that is not mandatory. You can avoid that one. So, normally OEMs not added those two cornering lamps to save the money. Now, coming to the next, the high beam. In the high beam, R112, R98 and R48 applies. Is it mandatory? Yes. It is mandatory and should have two or four units for N3 vehicle. For N3 vehicle, the max unit can be available at six units. But, minimum number is required. Two units should be installed in any vehicle for the high beam. Color should be white and the position in width. There is no specification regulation is required for this installation.
It is just, the driver should not get reflection in his eyes. That is all it is required. Otherwise, width or height is not a very specific given by the regulation. Visibility. Now, as I explained earlier, in-board, out-board, down and up. In all directions, five degree must be meet. Electrical connection. The high beam headlamps may only be switched on either at the same time or in pairs. If two additional high beams headlamps are installed, then no more than two pairs may be lit at the same time.
I will repeat this sentence again and then I will explain. If two additional high beam headlamps are installed, apart from two additional high beams, if it is installed, then no more two pairs. I mean, at the same time, two pairs can be lit, not more than two pairs. At the same time. This is what he is explaining. Suppose you have four lamps on the front side for the high beam function, only one time two lamps should be on, not more than two can be on. During the transition of low beam to high beam, at least one pair needs to be switched on for the high beam.
When you are switching on the high beam, at least one pair should be on. During the low beam function, all high beam lamps need to be switched off at the same time. In the previously, we learned that when you are switching from low beam to high beam, it is not mandatory to turn off the low beam. But here, if you are switching from high beam to low beam, then the high beam should be turned off. Title is a mandatory here. And other regulation is the luminous intensity of all switchable high beam lamps must be not exit more than 43,000 candida.
The sum of the reference number must be not greater than 100. So, this intensity, we will talk about later on. What is the intensity? Intensity, you learned previously, but the values and the photometry chart, we will talk about later sessions. For the front fog, ECR48 in ECE, R19 is applicable. So, the front fog lamp is optional. Previously, you have seen that low beam and high beam is mandatory. Here, this is optional. You should have two number of unit. If you are adding it, then two number of unit should be there.
The color is white or light amber. Amber is kind of yellow. So, either white you can use or light amber you can use. The width they have defined 400 and not higher than the low beam on the height size, not higher than the low beam headlamps. That means it should be not go beyond the low beam function. It should be lower than the low beam function. Minimum 250 mm above the ground and M1, M2 categories vehicle maximum 800 it can go up to. And for the M3G category and other glasses, it can go up to 1200 and 1500 mm also.
The visibility should be meet 10 degree horizontal inboard side and 45 outboard side and vertical and horizontal up and down it should be meet 5 degree. Electrical connection, it must be possible to switch them on off independently. That means it should not be linked with the high beam low beam function. When you are turning on the high beam, it should be not like that position fog function is turning on. It should have a separate connection. Telltale, it's mandatory and independent non-flushing warning lamp. Other regulations, a special regulation in connection with the headlamps of R123 AFS.
If you are applying the fog lamp into the vehicle, I mean if you are installing the fog lamp into the vehicle and with the AFS, there is a special regulation applies that is R123. Coming to the next, it is front directional indicator. So, the R48, R6 will be applicable for this. It is mandatory for all passenger cars and categories are 1, 1A and 1B. What is 1, 1A, 1B? This I will explain. The color should be amber. Till now, we were looking at the color is white.
Now, because it's signaling function, it should be amber color. Position width is 400, 350 and 600. At max, it can go up to 1500. Visibility is 45 and 80, inboard and outboard. Vertically and horizontally, it should meet 15 degree. And, but if a position of height is less than 750 mm, it should also meet 5 downward degree. And 20 degree inboard is required for M1 and N1 category. Connection, it must be switched on independently of the other lamp. All indicator needs to be switched on or off at the same side, on the same time.
If you're turning on the indicator, then the tail function, I mean on the tail light, if you have the indicator and the gate and the mirror, you have the indicator, then all the indicator should be switched on at the same time and switch off at the same time. And the flash should also be synchronized. It should not be like the front side, it is flashing different and on the back side, it is flashing differently. Title, it is mandatory. Other reason, a malfunction of direction indicator must be signalized in the vehicle.
That means, if turn indicator, if it is malfunctioning, then the user will have a notification in his dashboard. You might be seeing, if the one indicator of your vehicle has been broken down or it is not working, then the flash will increase for the other indicator. Normally 85 flashes per minute coming from the vehicle side. If you're turning on the turn indicator, then 85 flash per minute, it happens. If you're having two turning indicator working condition. But if one get break down, then the flash increase with the double frequency.
Let's talk about the categories. What is category 1, 1A and 1B? There must be an installation of low beam and fog. And there must be an installation of turn indicator. So the distance between turn to the low beam function, if it is more than 40 mm, what distance? The edge of the reflector. We will talk about this into while we do the modeling or the drafting. But here you should understand the extreme edge of the turn indicator and low beam function. If it is more than 40 mm, then it falls into one category.
Thank you.
Part 2
Now moving next, we will look the next thing, that is Positional Lamp. In Positional Lamp, R48 and EC R7 is applied. The presence, it is mandatory to have in all type of vehicles, that is M1, M2, M3, O1, O2, M3G, all type of category of cars, it is mandatory to have. Number, there should be two units to be installed. Color, color should be white. Position in width, it is max 400 mm from extreme outer edge of the vehicle. The clearance between position lamp for M1 and N1 is not defined. However, for the other glasses, it is minimum 600 is required.
But for minimum 400 mm for the vehicle, less than 13 mm width. This is same like the low beam. If it is less than 1300 mm, the 400 minimum gap is required. However, if it is more than 1300 mm, the 600 mm gap between two lamps is required. Position in height, position in height minimum, you can go up to 250 mm and at the max, you can go up to 1500 mm. Exception is 2100 mm. An exception is only possible if vehicle geometry does not make a standard installation possible.
If it is not at all possible to install within this criteria, then exception has to be taken from the regulatory department. Visibility. Horizontal, it is 45 in-board to the 80 degree output. And vertically, it is 15 up and 15 down. But for a position in height of less than 750 mm, it should be required 5 degree downwards. Restriction possible for M1 and N1 vehicles. You can see or check out the R48 section 6.9.5.2. An electrical connection must be designed so that the lamp, tail lamp, side marker lamp, and registration plate lamp can be switched off and on simultaneously.
It means the position lamp for the front side, it should be linked in such a way that if it is a driver or a user is turning it on, the side marker lamp, the side marker lamp, the tail lamp, and front side position lamp with the license plate lamp should on simultaneously at the same time. May be switched off while the indicator is on. Or it is possible to turn it off when the side indicator is turning on. Tail tail, tail tail. It is mandatory. The tail tail may not flash. Not necessary if the lighting equipment in the dashboard can only be switched on at the same time as position lamps.
So, it is mandatory but it is not recommended to have a flash. What is tail tail guys? It's a signal device should be available on your dashboard. Just like for turn indicator, it is mandatory. That means if a person is giving a turn indicator signal, the driver should be aware by looking at their dashboard that it is blanking. So, there should be a signal has to provide it to the driver. Coming to the next, parking lamps for front side. Presence. It is optional for vehicle less than 6 meter. Normally, for passenger vehicle, we have a length of 5 meter category.
So, if it is having a more length in 6 meter, then it's optional. And for less than 2 meter in wide. Prohibited for all other vehicles. Parking lamps are only applicable or not applicable. It's optional for a vehicle which having a length of less than 6 meter and 2 meter in width. Two numbers of lamps at the front and two number of lamps at the back side and one lamp on each side is required. Colour should be white. Position in height is maximum 400 mm from the extreme outer edge of the vehicle.
If only 2 lamps are installed on entire vehicle, installation is on the vehicle side. Position in height. No specification for M1 and N1 vehicles. But for all other vehicles, the classes minimum 350 and maximum 1500 mm is applicable. Exception case is 2100. Visibility should be horizontally 45 inboard and outboard and vertically it's 15 degree up and down. But for a position in height of less than 750 mm, it should also meet 5 degree down board. Electrical connection. It must be possible to switch on parking lamps independently. There should be no link with the other function.
Tail tail it is optional. As I said, it should not to have a mandatory signal device on your dashboard. It is optional. If one is available, it must not be confused with tail tail for the position lamp and tail lamp. What does it mean? If you are giving a signal to the dashboard for the tail tail, then it should not be confusing to the driver that which lamp he has turned on. For the position and tail function, it should be different and for the parking lamp, it should be different signal device.
Other regulation. Other regulations are optional. If there is tail tail, it must be not confused. That is only the applicability in the case of parking lamps. Coming to the next, it's daytime running lamp. R87 and R48 applicable for this. Nowadays, it is mandatory to have all in passenger car. Numbers should be 2 units. Color should be white. And if you might remember, nowadays, the two-wheeler also, you can't turn off the beam or low beam or high beam of the vehicle because it works as a DIY.
So that's why it is mandatory. And nowadays, you are not able to turn off your two-wheeler turned light. So this is mandatory. Now coming to the position in width. That is 600 mm in between two lamps but minimum 400 mm for vehicle of 1300 mm. If it is less than 1300 mm, the 400 mm between two lamps is applicable. Position in height. Minim 250 height is required and maximum 1500 mm is required. Visibility. Horizontal, it's 20 degree and vertical, it's 10 degree. Vertical means up and down and horizontal, inboard, outboard.
Electrical connection. Automatic activation when the engine is started. So there are two things. One, when you put your vehicle key into the hole and you have not ignited, you just turn on the vehicle. There are three positions. One is switch off condition. When you insert your key and you just rotate it. Once you rotate, then that is called a one position. And for the ignite, you have to turn it more. So there are few things which depend on the OEM also. If you turning it on, not engine getting started.
If they wanted to add this DRL at that time or after engine get started, that time they wanted to start. As per the regulation, when the engine get started, then only DRL has to work. But before that also you can turn it on. That is not mandatory. I mean that can be added. But for the regulation, after engine get started, it should be not like after starting of engine, your DRL is not working. That is not allowed. But before that you can turn it on. The daytime running lamp must be switched off automatically if the headlamps or forelamps are switched on.
That's why it is called DRL because it works on the daytime. Whenever you switch on the headlamps, whether it's low beam or high beam or anything, the DRL must be off. That is a mandatory thing. The tail tail, it is optional. You should have a device in your dashboard or not have it. That is not a mandatory thing. Let's cover the side indicator in this session only. And then in the next sessions, we gonna cover tail side, backside functions. The presence of side direction indicator is required for category 5 and category 6 that falls into M1, N1, N2, M2, this all categories.
And this required with the less than 6 meter and more than 6 meter. Let me simplify for you. Category 5 applies when the length of the vehicle is less than 6 meter. And it is applicable only for M1, N1, M2 and M3 vehicle. Not for the O1, O2, N3 vehicle. And category 6 is mandatory for if the length of the vehicle is more than 6 meter then mandatory for N2, N3, N1, M2 and M3 vehicles. The numbers, 1 on each side is required. Color should be amber color.
Position in height, 350 mm for M1 and N1 vehicle while minimum 500 for all other glasses is required. And maximum it can go up to 1500 mm. Position in length, exceptions is also there. 2300 mm can be applied only in case of geometry if it is not visible. Or it is you are not able to install that lamp. Position in length, maximum 1800 mm from the front side measured from the outermost point. Because this is going to install in the sideways of the vehicle. So the distance they measure from the extreme edge, this time from the front side, your vehicle is in the sideways. Suppose you have a side view of the vehicle and the 1800 mm you should measure from the extreme end of the vehicle, the outermost point and two 500 mm for M1 and N1 vehicles.
Whenever vehicle geometry does not allow for install any installation of less than 1800 mm. So this is also exception case. Requirement is 1800 mm but if you are not able to meet the geometry requirement then it can go up to 2500 also. Visibility. Horizontal minimum 5 degree to rear 60 degree is required. Vertically 15 degree up and down. And for category 5 this is applicable for category 5 but for position in height less than 750 mm there should be 5 degree downward also has to meet. For category 6 however 30 degree and 5 degree below horizontal is required.
Electrical connection must be switched on with direction indicator on the same side of the vehicle together and independently. That means it is mandatory to have when the direction indicator switching on it should also link with that connection. They need to be switched on and off at the same side of the same activation device and flash should be synchronized that we have already talked about. So this also in related to the front side turn indicator it should be linked and whenever they are switching on on one side it should also get switch on automatically and flash also has to synchronize.
Telltale it is they have not given any instruction but this is an option now. Other regulation side direction indicator in category 5 may always be replaced with category 6. For M2, M3, N2 and N2 vehicle if it is more than 9 meter length maximum 3 additional categories 5 or 1 category or 6 is possible. So in other regulation category 5 luminous intensity minimum 0.6 candela that means if you are following in category 5 then minimum you have to meet 0.6 candela. And single ramp maximum 280 candela maximum is 280 and minimum should be 0.6 if you are following with the category 5.
If you are following with the category 6 then minimum 50 candela is required and maximum 280 candela is required. Type D what is type D what is type D ramp that I will talk about later on and that type D 140 candela is required. So guys this is all about the front and the sideways functions and the regulatory part. In the next session I am going to cover the backside of the vehicle and for the regulatory part. Thank you.
Part 3
Welcome back guys. So we already had so much theory. Now in this session I'm going to teach you to create a parametric modeling structure and we're going to talk about what you should do once you receive the class A, how the class A looks like and how you can ensure that all the regulatory parts should be made. Let me tell you in the entire course we're going to start with the scratch for creating a tail light model for automotive writing and I will going to clear all your doubts and what are the parameters and regulations you should keep in your mind by designing the model. So let's jump into it. First you have to create the product and you have to create a product structure in such a way once you replace the class A surface all files should get updated automatically. In initials video we learned about the parametric modeling. The same version we're going to learn about the parametric product structure. How you can do it? Let's start. First thing you have to create a product and give it a name. I am defining it as a master product file. Alright. This is my master product file. In this I am again going to create one more product.
I am going to rename it as a master product. I am going to rename it as at input surface. This input surface can be your class A surface or it can be optical surface. It can be thermal surface or it can be BOP surfaces. Anything whichever is coming from apart from you it comes into it. So let's define this structure. So in this this is my master file. I have added in master file one product file that is input surface. Now in this input surface I am just double click it and add one part file. In this part file I will rename it and give it a name lens class.
We should keep on both sides so that name get changed. Now again I am clicking on the input surface. I am creating a part again. Click no. Rename it class A housing. Sometimes you may receive the class A housing also or sometimes you may receive the lens only. Whatever it is. Whatever it is if it is not there we will keep it blank. But if we receive then we will put here. I will show you how this structure will gonna help you out from creating a parametric model.
So first we are focusing on creating a parametric structure. Once you have created the parametric structure then only you are able to create model very fast. Only one time activity will be there but this structure will help you to reduce your updating time. For example if customer is updating their class A surface with some kind of fillet or edges. You have to just replace a class A in this file only and rest of the file will get updated automatically. I will show you that later on but let's focus to create the structure first.
So you should be very focused and understand how this structure is being created. I will give the intense name here. Class A for bezel. We gonna talk about this also. What type of parts we have in tail lamp and what type of part we have in head lamp. But for the practice purpose I am gonna teach you for complete writing for the tail light how you can create a complete model. In the same fashion you can create for the head light also. And we gonna talk about the parts number of parts whatever available into the head light and tail light which will help you to crack any interview.
Now class A bezel. Again I click on this. Go to the component. Create a new part file. Rename it and put optics. What else can come to you. Class A will be come from the customer end. Class A of housing will come from the customer end. Class A of bezel may be come from the customer end or you have to create your own. Optics can be come from the optical team or you have to create your own. Optics can be come from the optical team or you have to create your own.
Create your own. So this all are input. Okay. So whatever file will come to you. You have to put it here accordingly. Now coming to the next. I will click on the master file. I will add another product file here. We'll rename it. As BOP parts. BOP parts. BOP parts or standard parts. What is BOP? It's brought out parts. Which you just buy from the supplier. You are not going to create your own. For an example bulb. Bulb is BOP part. You are not creating any 3D model at your own or you are not manufacturing the bulb at your own.
What you are going to do. What you are going to do. What you are going to do. You are going to the market and purchase the bulb directly. For the bulb manufacturer. That is the their component. But for the lighting. Bulb is a child part. So as a BOP part. Or a standard part you can say. Okay. So here I am going to add new part. Let's start with the bulb. And it's bulb holder. It could be LED also. Nowadays LEDs are there. I am defining the structure. Renaming can be done accordingly. If it is LED you can mention the LED.
Or else you can just add one more file. Name it as LED. Sometimes you may get LED. You may get bulb also. For different different functions. So we will have another file. Would be okay. Creating multiple files will not. It much space. But it will help us to. Create a parametric modeling. So just LED. Or we can add. Now LED is okay. Now next. Standard features. What is standard features? Which we use multiplied times. This you can find in any industry. If you are. If you are from the sheet metal. There might be possible. That you are. Using the same type of. Fillets. Or same type of. Surfaces. Etch. And every time. And the same thing. Happening in the lighting division. There are couple of. Features. Which repeatedly use. Into the lighting. For an example. The vent cap. Vent cap is a cap. Which helps to create. A ventilation gap. So we protect. The lamp. From going.
In dust and water inside. By the. Ventilation cap. That feature. Usually use. And carry forward. As it is. So that is the one thing. Apart from that. Via routing feature. Every lamp. Is having the wiring harness. So whatever kind of. Harness is there. There should be routing. We will talk about that later. During the modeling. However that is the standard feature. So I am giving this explanation. To give you an overview. What kind of. Of standard features. I am talking about. At the time of modeling. This concept. Will be very clear. To you. This is standard features. Now next thing. Which comes here. Mountings. Mountings is something. Will be standard. Just like. If you have M5 screw. M6 screw. That is standard. In the automotive lighting. So pivot mounting. M5 screw mounting. That is. Very common. Usual parts. So we can have.
Same thing. Same thing. As it is. Over here. So we have. Bulb. Lads. Standard features. Mounting. Later on. If anything. Will come here. We can. Add it here. Now next. Again. I will add. One more product file. As we name it. Tooling details. Not details, we will add it, tooling check, because here, in this file, we gonna have a tooling check, we will add part, we gonna rename it, lens, tooling and slider direction, next, housing, tooling and slider direction, whatever parts we have, we should have the tooling and the slider direction for that, so bezel, and anything else we left, no, okay, one more should come here, reflector, reflector, it may possible for the taillight, that there will be no reflector, but in the headlamp case, there will be always reflectors, so if you are making a file for the headlights, or the taillight, it should be common, that's why I have added the reflector, or if you have the optics, or it may be possible that for taillights also, sometimes, sometimes they use the separate reflector, we will talk about this later, why it is required, and why it is not required, during the modeling part, however, for the tooling checking purpose, yes, it should be there, now, next, again, I will add, one more product file, this is called, joining method, there are, four to five ways, to join, lens and housing, so, we gonna add one by one on those, vibration method, this all method, this all method, I am gonna cover, in the later videos, so, don't worry about this, everything will be explained to you, for now sake, I will add, glue method, hot plate method, this one is the last, so we have four type of method, there are multiple methods, also available, but, for now, in India, this four methods are being used, now, now, next, we gonna add, one more product file, in this, we gonna add, B surface creation, in the B surface creation, we will have to add, for the, lens B surface, it should be very specific, and, having a separate part file, would be very great, for you also, to identify, or work, housing B surface, base B surface, base B surface, the last one is, objective B surface, so, we got four files, we will create the B surface here, and, from the A surface, now, next point is, again, I will create a product file, assembly, for joining, what does it means, once we have the B surface created, with the solid part file, and, we have created our joining method here, we will, create a union trim operation here, this will having only one part, lens and housing joining, once, we get, the joining, we will, have another separate file, child part joining, or, we can, make it, two parts, one is for lens, one is for housing, that would be more better, lens joining, and, then, then, we have, housing joining, how this will happen, I am going to teach you, the child part joining, will be here, what child part we have, reflector, and, the bezel, so, this is my, master file, and, here, input class, and, one more thing should be, come here, one, thing we forget, that is the, surrounding, this comes from the, OEM side, now, we have this one, let's create a final product file, final product, here, we will combine, all the parts, lens final, why, we are making, this much files, because, it will help us, to, create a parametric modeling, as well as, if someone, ask you, to just send, me the final file, or, someone, will ask you, to send, me, B surface file, So, it will be very easy, for you, to extract, that particular file, and send it to him, apart from that, yes, modeling, will be very easy, housing, reflector, bezel final, we got our final, master file, products, now, only thing, remaining, here, is, the tooling points, so, I will add, one more file, and, add, final tooling details, this, this will be our final file, and, in this, we will have, Parting line. Next, we will add AGP details. That is ejector gate and parting details. Parting for the slider lines. So this will be here. So if you're tooling I will ask, send me the parting lines only. You can extract this one. If they ask for the AGP, you can send this one. So this structure will help you. Now, how you can save it? If you just click on the save button, it will not gonna save. It will only save the master file.
So, for saving this file, you have to go to the save management. I will show you how you can save up only updated file. But here for now, I will save this entire product file. So what you have to do, you have to click here and click on save is. And I'm gonna create one new folder. This I will rename it master structure. And this file name will be same. And you can see the action has taken it auto saving. Now this part is not getting saved. So just click on the propagate directory. And this also we wanted to save as an input. So on the desktop, we're gonna save it. Classify.
And just hit OK. You can see the file has been saved at the desktop with the save management. Now whenever you change this particular file, only this file you have to save. So how you can do it? Just click on the save management. And click on action. So it will show you which file has been recently updated. And that only you just click on the save button. If you wanted to save entire file, just click again here. Make the save or save is. Choose the path. Click save. If you wanted to replace, click OK. Propagate directly and hit OK. It will save entire files.
So this is how you can create your master product file for the parametric input. Now let's talk about the class A surface. OK. So this will be kind of your class A surface. You will receive this type of surface from the customer. So as I said in this complete course, I am gonna start with this surface and end with the creating a complete tail light. You will also learn the same from the sketch how and what you should do once you receive this type of surface. And we're gonna use our master structure to create a parametric model. And later on, we will see if something is changed here, how my master structure get updated automatically. That will save you a lot of time.
So in the next session, I will cover EC regulation again for the tail function. So before modeling of this particular lens or complete tail light, we should be aware what kind of precautions we should have to take care. So meet you in the next session. Thank you. Thank you.
Part 4
Hi guys, in last session we learned about the structure making and before that session we are learning regarding the regulations. So in continue that order because learning theory part in a week or few sessions is very difficult because you have to be very focused when the theory will be applied. So in between that I have shown you how you can create a 3D parametric structure. Now coming back to again on the regulation part, now we gonna talk about the rear direction lighting. In this session basically we will cover all the back side regulatory part of any vehicle.
On the back side we have 4 to 5 functions which we already covered in the starting sessions. The functions are tail function, stop function, reverse function, rear fog, direction indicator and license plate. So these are the basic functions which are available on the back side of any vehicle. Just like the session number 2, we learned on the front side how many functions are there and what are the applicability of the regulatory parts on that particular function. In this video we gonna cover on the back side.
So let's start with the direction indicator. The direction indicator now it is having a EC R6 and EC R48. EC R6 will be applicable for the front direction indicator also and the side also with some categories 506 which I already explained in the last videos. So we will learn more about the R6 and applicability of this. So let's check out the presence. Is it mandatory or not? Yes, it is mandatory for all passenger cars with the all glasses. Glasses we learned M1, M2, O2, O1, M3G categories.
What are the glasses? If you remember then it's good. But if you are not remembering that what type of category I am talking about just check out the last videos. So in this presence there are two categories in the headlamp there were three categories 1, 1a and 1b here we have two categories it is 2a and 2b what is 2a and 2b we will talk about it before that the numbers how many units should be available in the rear side direction indicators. So 2 units it's mandatory and further 2 optionally possible for M2, M3 and N2 and N3 vehicles.
The color coordinate should be amber color for the front side mostly colors are white but here for the direction indicator front side also it was amber color and for the rear side also it is amber color. Position in width it is maximum 400 from extreme outer edge of the vehicle. This does not apply to the additional indicators. If you are putting more indicators apart from 2, 2 is mandatory and 2 are optionals. So if you are applying more indicators then the maximum 400 mm from extreme edge will not be applicable for those indicators.
Minimum 600 between 2 indicators are required. But in case if the length is less than 1300 then you can go up to 400 mm between 2 lines. So this is the mandatory width. Let's move to the height. Position in height is. Guys you can see there is a ECE R48 then there is a clause they have mentioned 6.5.4.2. What does it means? It is a clause where this regulation is mentioned. So this might get updated and it might be a possibility that 6.5.4.2.1 again and the one will be applicable for the revision.
So that is a possibility. You have to check with your regulation agencies what new regulation has come out from the ECE department or AIS department. So you have to be updated all the time. Let's talk about the now position in height. So minimum is 350 required. From the ground height the 350 is the minimum distance you have to maintain for the direction indicator. And you can go up to a maximum limit of 1500. Exception 210 if vehicle geometry does not allow for an installation of less than 1500 mm.
If no additional indicators are installed. So there are two goals. One is if the geometry of the vehicle is not allowing you to fit your turn indicator at 1500 maximum height. So you can go up to 2100 also. But at the same time if there is no additional indicator are installed. Position in height of additional indicator minimum 600 mm above the mandatory indicators. So there should be a minimum gap between two additional indicators is 600 mm. Let's move to the visibility. Horizontal visibility should be 45 inboard to the 80 degree output.
Inboard outboard we already discussed in the last session. However, I will repeat here again. Because we are moving from front to the back. So you should not get confused. Just sit on the driver's seat or imagine you are sitting on the driver's seat. If you are putting your left hand straight and you are moving it inside or co-driver side. That is called an inboard. Same applicable on the tail lamp side also. So just think you are sitting on a driver's seat and you are moving your head towards the co-driver side.
The left hand you are moving towards your co-driver side. That is an inboard. 45 degree inboard and the exterior. I mean if you are moving right hand on the mirror side then it's an outboard. So in the indicator case for the tail function 45 inboard and 80 degree outboard should be meet. 45 outboard for M1 and N1 vehicle if side marker lamps are also flashes. If the side marker lamps are available then you can go up to 45 degree outboard condition. What are this visibility and angles this once we create our model then we will talk about this and how we can check this inboard and outboard that I will also show you.
Vertically and horizontally it is 15 degree up and down. But for a position in height of less than 750 mm also should be meet 5 degree down. So optional indicators are with a position in height of 2100 mm also required to meet 5 degree downwards. Electrical connection this will be same as we learned in for the front side and the side marker also. Must be switch on independently of the other lamps except the indicators. For an example if you are turning on the front side indicator the rear side indicator should be on.
And it should be not like you are turning on the high beam and indicator get started. So it should be separated. All indicator needs to be switched on and off at the same time and blinking or flashing should be synchronized. Tell it is mandatory so you can see in your dashboard there is an indicator right you always see. Other regulation installation of two additional indicators on all vehicle of classes M2, M3, N2 and N3 is optional. It is not a mandatory. Now let's talk about 2A and 2B category.
In 2A category luminous intensity minimum 50 candela is required. But for the single lamp it is maximum up to 1000 candela. While in 2A category it is for the single lamp it should go up to 500 at max. Type D lamp it is 250 candela and 500 candela respectively. So let's moving ahead. Tail lamp. Tail lamp is also known as positional lamp. So R48 and R7 is applicable. Presence. Mandatory. It is mandatory for all passenger cars. Also with the category R, R1 and R2. Numbers. 2 units is required and further 2 is optional.
Possible for M2, M3, N2 and N3 vehicles. If clearance lamps are not installed. Color. This is the first time we are reading the red color. For the all the front side it should be white apart from the turn indicator. And for the rear side for the tail light it is red and for turn indicator it is amber. Position in width. We have maximum 400 mm from extreme outer edge of the vehicle. This does not apply to additional tail lamps. Clearance between the tail lamps for M1 and N1 vehicles is not defined.
For all other vehicle classes minimum 600 mm between both lamps. But minimum 400 mm for vehicle width less than 1300. This is same for the turn indicator also. Now coming to the position of tail function in height. Minimum 350 mm is requirement. You can go up to maximum 1500 mm. Exception is available with 2100 mm. Only if the vehicle geometry does not allow for an installation of less than 1500 mm. And no additional tail lamps are installed. This is the same. If the geometry is not allowed to you to have your tail function within 1500 limit.
Then you can go up to 2100 limit. But it should be there is no additional tail lamps are installed. Position in height of the additional indicator. From level 40 to 2100, Just use it to be square Ahora, Minimum 600 mm above the mandatory tail lamps. Between two lamps, if you are additionally adding two tail lamps, then distance between these two tail functions or tail lamps, then it should have minimum 600 mm gap. Visibility, horizontally it should meet 45 inboard to the 80 outboard, 45 for M1 and N1 vehicle if side marker lamps is installed. Vertically and horizontally it is 15 degree, but for a position in height of less than 750 mm, it's also 5 degree downwards should be meet. For additional tail lamps with a position in height of 2100 mm, also 5 degree upwards should be meet. So if you are installing your tail function at 2100 mm, 15 degree must be meet plus 5 degree upwards should be meet.
Electrical connection. Electrical connection must be designed so that position lamp, tail lamp, side marker lamps and registration plate lamps can be switched on and off simultaneously. So when you are turning on any position lamp, whether it's front side or tail side or if you are turning on the license plate light or if you are turning on the side marker light, all this light should have one connectivity. Tail tail function, I mean tail tail, it is mandatory thing. It should have a combination with the tail tail for the front position lamp. If you are turning on the front function, you should have an indication in your dashboard that is mandatory and it should be linked with the tail function also.
Category R, R1, it's fixed. For the tail function 4 candela is minimum requirement and single lamp can go up to maximum 17 candela. Type D lamp maximum go up to 8.5 candela. Category R2, it's variable. Then luminous intensity is minimum 4 candela. Single lamp max go up to 42 candela. And type D lamp maximum go up to 21 candela. What is type D and category Y? This I will explain later on to you. Moving ahead, stop lamp. EC R48 and EC R7 is applicable for the stop lamp. Presence, is it mandatory or not? Yes, it is well mandatory for the all glasses. Category S1 or S2.
What is category S1 and S2? We will talk about this later. But first, let's focus on the numbers. Two units are required except when stop lamp in category S3 or S4 are installed. Two additional stop lamps in category S1 or S2 can be installed on vehicle glasses M2, M3, N2 and N3. So what does it mean? Except when stop lamps in category S3 and S4 are installed. That is the center high mount stop lamp. Two units are mandatory except when stop lamps in category S3 or S4 are installed. If S3 and S4 are installed, you can have two additional stop lamps.
Color, it should be also having a red color. Position in width. For M1 and N1 category of vehicle, maximum 400 mm from the extreme outer edge of the vehicle. No regulation regarding the clearance between the stop lamps. For all other vehicles, class is minimum 600 mm between both stop lamps. But minimum 400 for vehicle less than 1300 mm. This is same for the turn indicator also. You should go up to 400 at max and minimum 11 should be 600 required. In the case of 1300 mm, the width of the vehicle is less than 1300 mm. Then you can maintain a 400 medium 11.
Position in height. Minimum 350 and maximum 1500 mm. Exception 2100 mm only if vehicle geometry does not allow for an installation of less than 1500 mm. And two additional lamps are not installed. So you can go up to 2100 mm. So you can go up to 2100 mm. But in the case of geometry is not allowed or you have not installed any separate two stop lamps. Position in height of additional stop lamp minimum 600 mm above the mandatory stop lamp. Visibility, it should meet 45 inboard and outboard and 15 degree up and down.
But for position in height of less than 750 mm, it should meet 5 degree downwards. The vertical angle above the horizontal can be reduced to 5 degree. If position in height of additional stop lamps is 2100 mm. The vertical connection must light up when the brake is placed. So here the electrical connection gets changed. Whenever you are placing your brake, this light should turn on. Tail tail tail is optional. If there is one only as an operating tail tail in the shape of a non flashing warning lamp that lights up in event of fault. Only in case of a fault, then there should be an optional tail tail is required.
The clearance of the stop lamp for the rear fog lamp must be more than 100 mm. What is S1 category? It's fixed one. So luminous intensity minimum is 60 candela. Single lamp go up to maximum 260 candela and D type category lamp go up to 120 candela. While in S2 category which is variable, luminous intensity minimum 60 candela for the single lamp go up to maximum 730 candela and type D lamp go up to maximum 365 candela. So this is all about stop lamp guys. Moving ahead, center high mount stop lamp.
Normally or usually it is called Chimsel or HMSL and as a short form in the industries, but the full form of the Chimsel or HMSL is center high mount stop lamp. So let's talk about what are the applicability. So ECR 48 and ECR 7 is applicable for this category S3 or S4 is fault. And it is mandatory to have in M1 and N1 except chassis with the driver cabin and N1 vehicle with the open loading space optional for other vehicles. So you might be seeing that the chassis and cabins vehicles on the road. So in that category it is accepted. Otherwise it is mandatory to have in M1 and N1 vehicle.
Number of unit it should be have one unit only. It is mandatory guys. You should have only one HMSL. If the median longitudinal plane of the vehicle is not located on a fixed body panel, but separate it, doors and there is no space for an S3 or S4 stop lamp. Two S3 or S4 stop lamps and the type D stop lamps or an S3 or S4 stop lamp can be installed left and right of the median longitudinal plane of the vehicle. What does it mean guys? If median longitudinal plane of the vehicle is not located on a fixed body plane.
That means the longitudinal plane is not defined by the OEM whether it is fixed on the body panel or not or but it separates the doors and other there is no space. But the longitudinal plane it separates with the door and there is no space to fit the mounting of a stop lamp. Then you can have two stop lamps at the same time that will fall into the D category. So two unit can be accepted also. Color should be red, presence and width. The central reference point must lie in the median longitudinal plane of the vehicle.
For example, if two S3 or S4 stop lamps are installed, each one needs to be installed as close as possible to the median longitudinal plane. If only one S3 or S4 stop lamp is installed next to the median longitudinal plane, the clearance may not greater than the 150 mm. Let's take an example to understand this longitudinal plane. Suppose this is your plane center of the chassis. So what he is trying to say if you are putting at the center then it is okay. Otherwise if you are putting it at this portion here then the gap between this should not go beyond the 150 mm.
Presence is in height either 150 mm below the rear window or minimum 850 mm above the ground. So if you have window here then below the window it should not go beyond the 150 mm and from ground it should have 850 mm of height. Visibility, horizontally 10 degree and vertically 10 degree and 5 degree as a horizontal. That means horizontally inboard outboard it is 10 degree but vertically 10 degree up and 5 degree down should be meet. Electrical connection, must light up when braking system sends a corresponding signal.
Means it is same as stop lamp when the brake is applied this should also get lit. Tail tail is optional, same if there is one only as an operating tail tail in the shape of a non flashing warning lamp that lights up in a event of fault. Other regulation, the S3 or S4 stop can be installed outside or inside of the vehicle. If it is not installed inside it must not diesel the driver. That means if we are installing the stop lamp outside of the vehicle but it should not diesel the driver.
It doesn't matter the other way. One or two. One or two. One. Two. S3 and S4 stop lamp may not be built into another lamp. This is a separate category, so it cannot be built with another lamp. So S3 category, the intensity should meet 25 candela, at a single lamp should meet 110 candela, and D type lamp should meet 55 candela. While in S4 category, luminous intensity, minimum 25 degree, but single lamp should meet 160 candela, and type D lamp should meet 90 candela. So let's move to the next. It's rarefog. This is also a mandatory function. The R38 and R48 is applied on this.
You can have one or two unit. The color should be red. Position and width, they have not defined. Position and height, they have defined from 250 to 1000. And for N3G category, if they build together, then rarefog go up to maximum 1200 mm. General position. With the one rarefog, if you are putting the rarefog on the center of the vehicle, then it is okay. But if you are having different vehicles for right hand traffic and left hand traffic, then it should be the position of the rarefog should be changed accordingly.
For the right hand traffic, it should be left of the center. And for the left hand traffic, it should be right of the center. Visibility should be meet horizontally 25 and vertically 5 degree up and down. Electrical connection. Cannot be switched on unless the low beam, high beam or fog are switched on. So it should not have a separate connection. It should be linked with the low beam, high beam and fog lamps. So once the driver or the end user will turn on the low beam, high beam or the fog lamp, then only it should be turn it on.
The title, it is mandatory to have the rarefog indication in your dashboard. Other regulations which are applicable, the clearance to the stop lamp must be more than 100 mm. The rarefog of the tractor vehicle can be switched off automatically if the trailer is doored and its rarefog lamp is thereby switched on. The categories F1, F and F2 is luminous intensity should be meet minimum 150 candela and maximum 300 candela. While for the F2 categories, luminous intensity minimum 150 candela and maximum go up to 840 candela.
Coming to the next, reversing lamp. So it is also a mandatory lamp to have in your vehicle. R23 and R48 is applied on this. One device mandatory and second one mandatory on M1 vehicle and all other vehicles with length of less than 6 meter. Two devices mandatory and two devices optional on all vehicles with length of more than 6 meter except M1 vehicle. So this should have at least one unit in your vehicle and it is mandatory to have in if the vehicle length is less than 6 meter then one is okay.
If you are having a more than 6 meter then two devices is mandatory and two are optional. Color should be white, position in width they have not defined. Position in height it should be minimum 250 mm and maximum go up to 1200 mm. Visibility if you have one lamp then 45 in-board out-board. If you have two lamp then horizontally 30 and in-board 45 should be meet. Vertical 15 up and 5 degree downwards should be meet. Electrical connection only later when the reverse gear is applied. So you can imagine whenever you are turning the reverse gear on this lamp should be turned it on automatically.
Title it is an optional. Installation of two optional reversing lamp allowed only on vehicle on one side. You cannot have two optional reverse lamp. Only one side reversing lamp is allowed if you are applying for the two extra lamp. So this is all on the back side guys. In the next sessions we gonna start 3D modeling. Thank you. For the last session we will start 3D modeling.