← Course overviewFree lesson 1 of 3 · lesson 1 of 12Next lesson →

Unlock all 12 lessons of 5G NR Protocol StackFull course ₹40,000 · paid

Price & syllabus
Free lesson · 16 min · no payment

5G Basics, Use Cases, Frequency Bands and Protocol Stack

A free lesson from Skill-Lync's 5G NR Protocol Stack course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 1”

What will you learn in this free 5G NR Protocol Stack lesson?

The session introduces 5G and its three use cases, eMBB, mMTC and URLLC, then covers FR1 and FR2 bands including TDD, FDD, SDL and SUL. It reviews the 5G architecture, comparing service-based and point-to-point core designs, and finishes with the control plane and user plane stacks.

  • eMBB, mMTC and URLLC use cases
  • FR1 and FR2 bands, TDD, FDD, SDL and SUL
  • N2, N3, N4, N6 and N9 interfaces in the 5G architecture
  • Service-based versus point-to-point core, and the user plane stack with SDAP

What comes after lesson 1?

The next free lesson is lesson 2, “5G Frame Structure, Numerology, Resource Blocks and Bandwidth Parts” (24 min). Later in Skill-Lync's 5G NR Protocol Stack course (paid): lesson 4, Week 2 Session 2; lesson 5, Week 2 Session 3; lesson 6, Week 3 Session 1. The full course has 12 lessons (4 h 24 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Dear Learner, on behalf of Skill-Lync, I would like to welcome you to the course 5G NR Radio Access Network. We'll be kicking off the first session with 5G basics. These are the table of contents for today's topic. We'll be covering the 5G introduction. Then we'll see the various 5G use cases, EMBB, URLLC, and MMTC. Then we'll understand about the various bands in 5G, including TDD and FDD frequency bands. Then we'll look through a glance of 5G architecture, different architecture like service-based and the point-to-point kind of architecture.

Then we'll understand in detail about the control plane and the user plane protocol stack of 5G. In this session, we'll have a quick recap of the 5G basics and the use cases. We'll look into the classification of 5G bands, and then we'll understand the overall 5G network and protocol stack. So let's start with the 5G introduction. As we know, 5G stands for fifth generation, just like earlier 4G stand for fourth generation and 3G was for third generation. Now 5G is the next generation of the LTE, the 4G telecom network.

5G mainly focuses on providing high data rate to the users in terms of multi-Gbps. It also focuses on low latency and high reliability, which is used for the industrial use cases and the industrial requirements. Along with that, it provides massive network capacity, increased availability, and improved service quality. Let's talk about the 5G use cases. 5G mainly supports three use cases on a broad level. EMBB, which is enhanced mobile broadband. Next is MMTC, massive machine type communication, and the URLLC, ultra-reliable and low latency communication. These three are having different aspects, different requirements.

For example, EMBB is used for high data rates and high traffic volumes. For example, if there is requirement of providing high throughput data in terms of gbps, 1, 2, up to 10 gbps, or even more than that, then EMBB mode of operation can be used of 5G. Another is MMTC. MMTC is mainly used for the IoT devices, where you have a number of devices, more than 10,000 devices together, having low energy consumption. And these are also low-cost devices. To support this kind of operation, we have MMTC support in the 5G.

Next is URLLC. URLLC mainly focuses on two important things. One is ultra-reliable and another is low-latency communication. So this type of technology used mainly in industrial applications, so where the site-to-site communication or robotic communication needs a very low-latency communication. Another example could be your V2X and V2V communication in terms of autonomous vehicles. And also, it needs high reliability, like you don't want your data to be loose. For example, if you are driving a car and you got a signal, so your car will be given a signal that, okay, there is a red light.

You should stop it. So it should be high reliable. If you miss it, then you can understand the consequences of it. These are the real-time use cases of 5G. Industrial IoT, healthcare, autonomous vehicle, education, drones, smart cities, transport, and entertainment. Now let's understand about 5G bands. 5G has different bands, mainly categorized into two subsystems. One is FR1 and another is FR2. FR1 is also called sub-6 GHz and FR2 is called MMWave, which is known as MillimeterWave. FR1 is sub-6 GHz, means it uses the frequency less than 6 GHz.

So you can see here, FR1 is having 410 to 7125 MHz and FR2 having greater than 20 GHz. So you can see here, 24252, 52600 MHz, FR2 can go. And so it uses basically the additional high-frequency bands, which was not being used yet in the earlier communications like LTE and 3G network. Each band may operate in either FDD or TDD duplex mode. So may operate, okay. So here you have to note, like each frequency band cannot support both FDD and TDD. We'll learn about it later on going forward, okay.

But as of now, just remember that few of the bands can support only TDD or few of the bands can support only FTD. But few of them can support both FDD and TDD together. These bands are classified as SA and non-SA. SA means a standalone operation and NSA is non-standalone operation. So in SA, you have, on a high level, SA, you have the complete 5G network including the 5G core. But NSA came at the earlier stage when 5G was being developed. It uses the LTE core and the 5G RAN network to make its reliable end-to-end network, okay.

So the earlier development didn't have 5G core network. And the operator wanted to start early on the deployment. So this NSA came into the picture where the 4G core was utilized and the 5G RAN was being used. So these are the bands. You can see FR1 and FR2 different bands. So FR1 is having few FDD bands. So N1, N2 and you can see till N74, okay. Then FR1 is having some TDD bands like N34, N38. Each bands are having different frequency range, okay. So you can check it in the specifications.

I will give you the details of the specification where you can check. Each band will give you a different frequency range, okay. And next is the SDL and SUL. So this is for secondary downlink and secondary uplink. If you would like to set up, then you can use N29, N75, N76 for SDL and N80, 81, 2, 3, 84, 86 and 89 for the SUL. Furthermore, FR2 are having four different bands. N257, 258, 260 and 261. Now let's move to 5G architecture. So this is the overall architecture.

You can see here there is one UV, the user element at the left, okay. Then the RAN. RAN is also known as GnodeB. So in LTE, it was known as EnodeB. And here the RAN is known as GnodeB. As we can see, RAN is connected to the 5G core just like the earlier networks like LTE. LTE, RAN also was connected to one of the core network, okay. So here this guy is also connected to the core network using N2 and N3 interface. So N2 is for the control plane which connects to the AMF of the 5G core.

And N3 is for the user plane. So RAN connects to UPF, the user plane function through the N3 interface. Other interfaces which are internal to 5G core is N4 interface, N9 and N6. So N6 basically connects to the data network. The user plane function connects to the data network. And if you have to connect two different user plane function, then N9 interface is used. And the 5G core control plane and 5G core user plane connects with each other using N4 interface. There are two types of 5G core network architecture defined by 3GPP.

One is reference-based and another is service-based. So reference-based is also called point-to-point-based. So you can see here just like LTE, we have each node connected using a particular point-to-point connection. For example, if you see in the diagram here, the AMF is connected to SMF using 11. Two AMF can be connected using N14. AMF can connect to AUSF using N12. NSSF and AMF is connected using N22. Similarly, UDM connected to AMF using N8. And SMF and PCF connected to N7. And AF and PCF connected using N5.

So this is point-to-point, each and everyone connected to a particular port and particular interface. But the next is service-based, which is completely different. This is a new concept came in 5G network to support the cloud computing services in the 5G core. So here you can see there is just one bus going in the middle of the 5G core network. And each of the network functions of the 5G core network is connected to that particular bus. So So So Here you can see there is one bus and each of them like NSSF, NEF, AUSF, AMF, SMF, they all are connected to this particular bus.

So let's say for example SMF has to transfer something to the NRF, okay, then it will simply put it in the bus and then this bus will be able to transfer it to NRF, okay. So there is no now direct dependency or direct connection with one network function to another network function. It just has to use one of the common bus, okay, and this common bus will be transferring the data using HTTP mechanism to another network function. But down here if you see RAN is still having the connection with UPF using N3, it is a point-to-point and the user plane function connects with the control plane function using N4 which is still having point-to-point connection like reference-based connection and UPF connecting to DN.

So this reference-based connection has been removed only for the 5G core network, 5G core network control plane. So you can see here all the control plane elements are now connected to a common bus but the user plane function, the data network, the RAN and UE are untouched in terms of how they connect to each other. Now next is 5G protocol stack, okay, so you can see here this is a 5G protocol stack and here till here there is no any difference because it is a control plane protocol stack.

So just like in LTE, if you remember the lowest layer, the L1 is 5 which is communicating to next layer MAC. MAC is responsible for again the scheduling, multiplexing, demultiplexing your logical channel prioritization. Then above MAC there is RLC and then PDCP. PDCP used for the user plane also and control plane also. So we have kept here in control plane stack also and you will see the PDCP and user plane also. Then RRC is only for the control and then on top of it NAS which is a non-access stratum which is connecting from UE to core network.

It is not accessible to the GnodeB. So in the GnodeB side you can see the 5 MAC RLC PDCP and RLC just like UE which is responsible to talk to each other, okay, in the control plane and in the AMF there is a NAS protocol which is connecting to UE's upper layer control plane stack which is non-access stratum. This is a 5G user plane stack, okay, so here you will see one of the major difference is SDAP, okay, we will learn about this SDAP but this has been introduced in 5G mainly it was not there either in LTE or 3G, okay, so 5G is having different kind of quality of service mechanism, okay, that uses this SDAP.

So we will learn about it in detail but we have to just understand the difference here what new has been introduced. So here from the control plane to user plane you can see RRC is not there because RRC doesn't have to play any part in the user plane scenario but here also the MAC 5 RLC PDCP and a new layer has been added called SDAP that is service data adaptation layer. PDCP functionality remains almost same, there are a couple of changes, RLC also having a couple of changes, MAC is having a lot many changes, furthermore 5 layer 1 also having a lot many changes, we will learn about each and everything in detail what all changes have been introduced.

Yeah, so that's all for today's session, we will just quickly summarize what we learned today, so in this session we learned about the 5G introduction that what is a 5G, what are the main purpose of having 5G. Then we understood about different use cases like EMBP used for high throughput services, URLLC used for the industrial kind of communication which supports ultra reliable up to 1 millisecond latency and high reliability like there should not be any data loss in those kind of scenarios. As we discussed as we discussed about various industrial scenarios, V2X, V2V communication, the healthcare system and the robotic systems, okay.

Then this MMTC which is used for the IoT devices, mainly for the devices which are having a low energy consumption and this device's battery run up to 10 years or 15 years time span. Then we learned about different 5G bands, FR1 and FR2, FR1 is having the lower band sub gigahertz, less than 6 gigahertz and FR2 is having a millimeter wave which is more than 20 gigahertz. Then we understood about the 5G architecture, how this point to point architecture has been converted to service based architecture where we have a common bus and all the network functions of the 5G control plane talk to each other using that particular common bus.

But one thing to note here, the service based architecture is only for the 5G core control plane, not for the user plane and rest of all other entities are still having communication through the point to point protocol. Then we learned about the 5G protocol stack where we saw this control plane and user plane stack and also we saw the difference between user plane and control plane and what new things have been added as part of user plane stack. For example, S-TAP has been added to support new QoS framework for 5G only.

So that's all from today's session. Let's see you again in the next session. Thank you very much.

Want the rest of 5G NR Protocol Stack?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full 5G NR Protocol Stack course

The remaining 9 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full 5G NR Protocol Stack course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.