← Previous lessonFree lesson 2 of 3 · lesson 2 of 27Next lesson →

Unlock all 27 lessons of 5G CoreFull course ₹40,000 · paid

Price & syllabus
Free lesson · 32 min · no payment

Multiple Access, Packet Core Evolution and LTE IMS Architecture

A free lesson from Skill-Lync's 5G Core course, on Grow by Skill-Lync · Last updated 16 Nov 2026 · Session: “Week 1 Session 1 Part 2”

What will you learn in this free 5G Core lesson?

This part compares FDMA, TDMA, CDMA and OFDMA, then follows data rates and packet core nodes from GPRS and UMTS to LTE. It then walks through the LTE and IMS network, covering PLMN identity, the CSCF nodes, BGCF and IBCF, and the bearers and QCI values used.

  • FDMA, TDMA, CDMA and OFDMA compared
  • SGSN and GGSN evolving into MME, S-Gateway and P-Gateway
  • PLMN, MCC and MNC identify a mobile network
  • IMS nodes and QCI values for default, voice and video bearers

What comes after lesson 2?

The next free lesson is lesson 3, “Telco Cloud Placement and Mapping 4G Nodes to 5G Functions” (35 min). Later in Skill-Lync's 5G Core course (paid): lesson 4, Week 1 Session 3; lesson 5, Week 2 Session 1; lesson 6, Week 2 Session 2. The full course has 27 lessons (12 h 47 min of video); see the course overview or its price and syllabus.

Lesson transcript

Machine transcript of the lesson audio (lightly cleaned). Technical terms may contain errors; the video is the reference.

Okay, so next is the multiplexing. So multiplexing is the process of combining multiple signals into one signal which can be transmitted over a shared medium because radio is a very crucial thing because radio spectrum is limited to all the service providers. So it is very important to multiplex the signals before sending it on radio so that actually more users can simultaneously send and receive signals over the radio channel. So we will see what is multiplexing, what are different ways of performing multiplexing. So initial ones were FDMA, frequency division multiple access. So in FDMA, it was process of dividing one channel or bandwidth into multiple individual bands.

So this is FDMA. So this is FDMA. So one frequency is actually broken into multiple smaller frequency bands. So for example, F1 will be allocated to user 1. Then F2 will be allocated to user 2 and F3 will be allocated to user 3. So that actually there is no collision. So to avoid the collision, there is a segregation on the frequency. And second one was a TDMA, time division multiple access. So here, bandwidth of channel is divided into various stations on the time basis. So basically different time slots are given to the users to transmit and receive so that there is no collision.

And third one is CDMA. So CDMA is code division multiple access. So here, each user is assigned with a unique code sequence. So that actually now they can transmit data simultaneously because there will not be any collision because of the unique code, which is assigned to the users. And fourth one is UFDMA. It started from like 3.5G HSPA. So UFDMA is orthogonal frequency division multiple access. So in UFDMA, users actually transmit orthogonally. So actually they transmit at 90 degrees from other users. So that actually there is no collision. And because of UFDMA, as there is no collision, so actually bandwidth can be enhanced.

And therefore, intracell interference is not a problem because all the data are sent orthogonally. Okay. So now we will see the evolution in performance. So if you start with 1G, so 1G was just analog technology. So it was mostly used by military. So actually digital voice or digital mobile technology came into existence only in the year 1991. So it was CDMA and GSM. So GSM was based on TDMA, time division multiple access, and CDMA was based on code division multiple access. And data rate was 14.4 kbps.

And 2G used to support digital voice and SMS. So even in 2G, there was no support for data. So support for data first time actually came into existence only in 2.5G. That is GPRS and Edge. So Edge is almost 2.75G. So GPRS and Edge both are evolution of GSM and 1xRTT was evolution of CDMA. And this came into existence in 1999. And just before this actually 3GPP was formed for GSM and 3GPP2 was formed for CDMA. And data rate was 384 kbps that was supported in 2.5G.

And multiplexing was the same TDMA and CDMA and higher capacity and packetized data. So this was the first technology which supported packet data transmission. Then it was 3G which came in 2002. And here first change that you can see is multiplexing. So multiplexing it just says CDMA. It means CDMA was such a useful multiplexing technology that even GSM borrowed this technology. So now GSM started calling WCDMA, white band CDMA. So white band CDMA actually just uses CDMA technology on the radio side. And all other core networks were actually evolved from GSM.

So now it is called WCDMA, white band CDMA which is the evolution of GSM which uses CDMA on the radio. And CDMA 2000 is the evolution of CDMA core. So this is very important to understand WCDMA, white band CDMA is evolution of GSM on the core side. It is not evolution of CDMA on core. Just that actually it started using CDMA multiplexing technology. And data rate supported in 3G was a 2 to 8 mbps. So these two are again evolution of 3G. So this is high speed downlink packet access, high speed uplink packet access.

So here actually data rate was increased in downlink 14 mbps and uplink 5.8 mbps. Then for the first time, WCDMA was used. So using WCDMA, this bandwidth was increased in 3G without any change in core. So WCDMA, actually first time it was used in 3.5G. This is 3.5G. And it was further enhanced and it was called HSPA plus. And data rate was increased to 84 mbps and in downlink and uplink 10.8 mbps. And here from 4G onwards, single standard, as I mentioned, actually there was no CDMA anymore.

Everything was converged to single standard and it was launched in 2010. Then data rate, it was 100 mbps. Uplink and downlink was 1 gbps. And multiplexing was CDMA and OFDMA. And 5G came into existence in 2018 against single standard and total throughput that can be supported in 5G is 20 gbps. And multiplexing is done still using OFDMA. So this is the comparison in the performance starting from 2G all the way to 5G. Okay, so next one is we will see the operating frequency bands in India.

So for 2G frequency bands that is used in India is 900 MHz and 1800 MHz. And these are the service providers. So Airtel, Idea, Vodafone, ASL, BSNL. Then for CDMA, the frequency band that is used in India is 850 MHz. It is used by Reliance, BSNL and Tata. Then WCDMA is 3G GSM. And the bandwidth that is used is 2100 MHz and 900 MHz. Then WiMAX is 2300 MHz. And then 4G LTE, it has multiple bands, 1800 MHz, 800 MHz, 2300 MHz and 2500 MHz. So this frequency band may be different in different countries.

So for example, if you go to US, so these bands will be entirely different. Now we will go through mobile radio technology evolution. So starting from GRAN. So this is a 2G network. So this is a GPRS edge radio access network. This is a UTRAN. This is 3G. And this is evolved UTRAN. So here UTRAN stands for Universal Terrestrial Radio Access Network. And this is evolved Universal Terrestrial Radio Access Network. So here you can see everywhere it is RAN. It means radio access network. So we are going to see the evolution on the RAN.

So let's start with a 2G network. So this is the 2G handset, which is connected to the BSS. So BSS is basically base station system. So in 2G, it was called complete system was called BSS. And it used to have three components. So first one is the BTS. So this is basically the transceiver. So base transceiver station. So basically it used to receive the analog signals from the handset. And then it is connected to the base station controller. And base station controller has got two parts.

So first one is base station controller. And second one is the packet control unit. So here itself. So for example, if this handset is performing. So this has huge amounts of the authority. So that one is going to be a級green acquisition. So I'm going to be gonna be a breather evening the name the name of single year. Voice call. So, here actually it will be segregated. Voice call will be segregated. So, voice call will be actually it will be handled by the draw and it will be sent to the CircuitSwiss and if it is downloading any data or browsing any data, then that will be segregated here and it will go through PCU, packet control unit to the PacketSwiss network and this interface is called GB interface between base station and the core.

and interface is A between the base station and the CircuitSwiss. So, here you can see the clear segregation between voice call and data call. In 3G, draw. So, draw is basically a transcoder rate adaption unit which was used for the voice call was merged with this entity and now it is called just RNC. Just one entity for these two and now it is called RNC. And BTS, it is now changed to node B. So, these terms are coined by 3GPP body. So, these are the technical terms and so you need to use the same term.

So, in 2G. So, in 2G, if you talk about 2G, you need to say BTS, a base transceiver station. In 3G, you need to call it as node B. Node B plus RNC, radio network control. And here, even in 3G. And here, even in 3G, there are two different paths. IU, CS, CircuitSwiss and IU, PS. IU is the interface name. It is the reference point name between RNC and CircuitSwiss. These names are also from the 3GPP specification. So, IU, CircuitSwiss and PacketSwiss. And in 4G, these two are merged together and now it is called Evolve Node B.

So, now there is only one entity in the radio and that is called Enode B. And as we discussed, there is no voice path in 4G. So, now there is no CircuitSwiss. So, everything is PacketSwiss or it is based on the IP network. But earlier, for control plane and data plane, there was only one link. IU, PacketSwiss. But in 4G, when we will discuss more about the architecture, we will see that now there is a segregation between control plane and user plane. So, here actually, S1U. This interface will be used to send data. And S1MME interface will be used only for the control packets. So, we will see that in detail.

So, this is the packet core evolution. So, in the last session, we saw the evolution on the RAN side from 2G to 3G to 4G. So, on the last slide, I mean, we have not shown 5G. But 5G is very much similar to 4G. So, in 5G, this Enode B is called Next Gen Node B. So, it is called G Node B. G is a Next Gen Node B. In 4G, it was called Evolve Node B. In 5G, it is called Next Gen Node B. And interface name will also change. That we will see later.

Okay. And in the packet core. So, if we start with UMTS. So, 2G and 3G core network is exactly the same. There is no difference. So, here we have shown just UMTS. That is 3G network. So, these are Node B. And this is RNC. And which is connected to IUPS. This is SGSN and GGSN. So, SGSN stands for Serving GPRS Support Node. And GGSN stands for Gateway GPRS Support Node. So, SGSN handles both control and data. And even GGSN handles both control and data. And then we have HLR in 3G. And actually, here it says both HSS and HLR. So, HSS is basically evolved version of HLR in 4G.

So, HLR is home location register. And HSS is home subscriber server. So, basically, it stores the subscription policies and also the authentication tokens for the user. So, it is used for the authentication. And also, it provides the subscription details for the subscribers. Okay. So, now, as I mentioned, both SGSN and GGSN actually handles both user plane and data plane. So, now, if we want to bypass user plane from SGSN, we need to use a direct tunnel. So, basically, what we can do is we can directly send data to GGSN bypassing SGSN.

So, for control plane, still from RNC, it will go to SGSN. From SGSN, it will go to GGSN. But for data, we can directly actually send to GGSN using GTPU, GPRS Tunneling Protocol User Plane. So, this was the UMTS direct tunnel. And if we see the evolution to LTE, then SGSN is broken into two nodes. So, first node is MME, which handles the control plane. And for user plane, we have S-Gateway, serving gateway. So, SGSN is broken into MME and S-Gateway. And GGSN is actually evolved to P-Gateway, PDN gateway in 4G.

So, in 4G, GGSN is evolved to P-Gateway, and SGSN is evolved to MME plus serving gateway. So, we will see the functionality of these nodes in the next slide. So, now, we have fair knowledge about evolution from 2G till 4G, I would say, because 5G, we will see in a different way. Okay. Okay. So, now, we will go through the various components of LTE and IMS. And we will see the how end-to-end mobile network looks like. And we will now focus more on 4G or LTE architecture, because to understand 5G, the best place to start is 4G.

So, when we start with 5G, we will try to relate to all the components, how 4G components are evolved to 5G. Okay. So, now, we will see the various components of LTE and IMS. Okay. So, in this diagram, actually, you can see there are two networks. First is AT&T network. And at the bottom, we have Verizon network. So, network is identified using two things, MCC and MNC. So, MCC is Mobile Country Code and MNC is Mobile Network Code. And MCC plus MNC is PLMN. So, PLMN is Public Land Mobile Network.

So, PLMN uniquely identifies a network. So, for example, AT&T will have one PLMN. So, which will constitute of MCC of, if it is US, then MCC of US. MCC is Mobile Country Code of US. And plus MNC. MNC is Mobile Network Code assigned to AT&T. And similarly, Verizon will have its own PLMN, which will have MCC of US. If both are in US, then MCC Mobile Country Code will be same assigned to both these operators. And but Verizon will have its own Mobile Network Code. So, now we understand that this is a different network because it has got different MNC.

That is why it will have different PLMN, that is Public Land Mobile Network. And this will also have a different PLMN. So, now this is a UV. Then we have a radio. Then we have a packet core. And then we have a IMS core. IMS core is used in 4G to provide the voice service. If a service provider wants to provide a voice service as a data service, then they need to use IMS core. Without IMS core, that is not possible. So, to provide the voice over LTE service, IMS core is required.

So, this is IMS core. And then this is the PSTN. So, that is a traditional landline. So, because even from mobile, we can perform a call on PSTN number, right? So, now we can see that this is a handset, radio, packet core, IMS core, and PSTN for one network or AT&T network. So, this can be from any network. And then second one is Verizon that is a different network. So, now we will try to understand different components and what is the use of these components. So, first one is radio that we had already seen in the earlier slides.

So, if it is 4G, then it will be a E node B. And there will be multiple E node Bs. So, for example, UV can be connected to this E node B. Actually, then it can move to this E node B. And that is called HAND. Moving from one Enode B to other Enode B. So coming to packet core, so first entity is MME, Mobility Management Entity. So first it handles the authentication. So basically first thing that network has to do is to authenticate the subscriber. So if subscriber is a legitimate subscriber, then it also performs the handover. It controls the handover when a UV moves across the Enode Bs.

Then also it controls the active idle. So for example, if UV is not sending any data for 10 seconds, actually UV will be sent to idle state. It means this radio will be terminated. So why this is required is, so first thing is actually this spectrum is very expensive. So it is very important to utilize it optimally. So to use it in an optimum way, this is required. And second is, by removing this radio connection between UV and Enode B, whenever UV is in idle mode, actually it saves the UV's battery.

So it helps in these two ways. And this is also controlled by MME. So as we discussed, it controls mostly three things. First is performs the authentication of the UV. Then it controls the active idle. It controls the handover. And also when UV is in idle state, if there is any downlink data. So for example, this UV is in idle state. So this has been taken down. So this UV is sending some WhatsApp message to this. So it will send to the internet. Then when the downlink data comes, MME will perform the paging because MME network would need to request the UV to again connect to the network or else this UV will never know that I have some data waiting for me and I need to connect back to the network.

So network performs the paging. MME will page down this UV and it will say that, okay, there is some data waiting for you. So this UV will again connect back. to the network and data will be delivered to this network. And again, if it is not sending or receiving any data for next 10 seconds, again, this radio network will be terminated. So this is how it works and it is controlled by Enode B. So there is a timer set on Enode B. If any particular user is not sending or receiving data for 10 seconds, this will be terminated.

But actually it is controlled by this, but this message is relayed by MME. So basically MME has to clear this interface as well between Enode B and S gateway. So that is initiated by MME. Okay. Other one is a serving gateway. So serving gateway, actually it terminates the connection towards Enode B. So during roaming S gateway can also perform the charging charging. So charging in the sense how much data UV is using. So all those charging can be done by S gateway as well. And then other component is B gateway, PDN gateway. So PDN gateway, it assigns the IP address to the UV. Then actually it also assigns all the QS to the UV quality of service.

Then it performs the D packet inspection. It means if UV is actually browsing Facebook. So network can actually detect what traffic this UV is browsing. So all kinds of D packet inspection is done by PDN gateway. Then next one is PCRF. So PCRF is again a part of packet core only. So this is a policy charging. So this is a policy charging and rule function. So it actually hosts all the rules and it sends the rules to P gateway for the subscriber and rules are installed on the PDN gateway, but it is sent by PCRF.

And this one HSS is a home subscriber server. It stores the authentication tokens and also it stores the subscription. So whatever subscription UV has. Yeah. So these are the important components of packet core. So MME, S gateway, P gateway, HSS and PCRF. So five nodes. There could be other nodes as well. There could be nodes for online charging, offline charging. But it is not shown here to make it simple. So here five nodes are part of packet core. Now let's move to the IMS core. So as I mentioned, IMS core is used to support voice over LTE. If voice over LTE is not required, for example, if this was a 4G network.

So this IMS core is not required because here itself in the RAN, there would have been a separate path for voice. So voice will never come to this network in 2G, 3G. But in 4G, as actually voice is sent as data, so it will pass packet core. Then it has to come to the IMS core to be processed and to be routed to the destination, to the called party. So now let's understand the components of IMS. Okay. So before that, right. So as I mentioned, IMS is required only for the voice call.

So for data, for example, if UV is just browsing a YouTube, so this IMS core is not even used. So how the packet flow will look like? UV will send data to Enode B. Enode B will send to S gateway. S gateway, because MME is only for the control plane. Data does not flow through MME. So data will UV, Enode B, S gateway, P gateway. And from P gateway, it will directly come to internet. So this is how packet flow will happen. UV, Enode B, S gateway, P gateway. On SGI interface, it will come to internet.

Okay. But if UV has to perform a voice call, then IMS core is also required. So IMS has got three types of components. So first is the CSCF. You can see there is PCSCF, ICSCF and SCSCF. So CSCF stands for call session control function. So for to support voice, the protocol that is used is SIP. So this CSCF, CSCF is used to process SIP signaling packet in IMS. So first one is the proxy CSCF, which is the first entry point in IMS core. So basically P gateway provides the IP of PCSCF to UV during initial attach.

So UV knows that I need to perform registration to this PCSCF. So this is the proxy call session control function, which is the first entry point to the IMS core and entry happens via P gateway only. So UV will send SIP registration request to this PCSCF and how it will come via Enode B, S gateway, P gateway and to PCSCF. And once SIP registration call comes to PCSCF, PCSCF will actually discover ICSCF and it will forward to ICSCF. Now ICSCF will actually query HSS and it will know which is the serving SCSCF, which can handle this SIP call.

So serving SCSCF will be selected and serving SCSCF is the one which will actually process the SIP registration call. So SIP registration is basically for UV to just register to IMS in order to use voice over LTE service. So call will be processed by SCSCF and SCSCF will actually download the user profile from HSS and then it will enforce the policy and call will be actually hosted on SCSCF. So this is the first type of node and we have actually three proxy, then interrogating and then serving.

Then it may happen that this UV has actually called to a number which is sitting in the PSTN, right? So call has to go out from IMS score. So that happens via SCSCF will select BGCF. So basically BGCF is the breakout gateway control function and breakout gateway control function will select the media gateway control function, which will actually go to the PSTN. So other component is breakout gateway control function, BGCF. So BGCF is used only when UV wants to actually call to a PSTN number. In that case BGCF will be used and you can see other entity is IPCF.

This is the interconnect function. IPCF is interconnect border control function. This is used when actually UV wants to call a number to a different PLMN. So for example, this called party, if a user A wants to call to user B and user B does not belong to AT&T network and it belongs to some other network. So basically it has to go out of this AT&T network. So in that case, actually this interconnect function is used. So it offers the boundary control function and to relay the data interconnect border.

Gateway function is used. So, this is to send all the control packets. IBCF for control function and IBGF gateway function is used to send all the media packets to the destination PLMN. So, we already covered all the components. Similarly, all the components will be even in the Verizon PLMN or Verizon network. Okay. So, one thing is here you can see the bearers. So, just for the data call, if there is no IMS is required or there is no voice. So, data flows through the default bearer.

So, first UV will create a default bearer. Then, if UV wants to register to IMS in order to avail voice over LTE, then actually it will create the IMS signaling bearer, which will be created using QCI 5. And then, if UV is performing any voice call or video call, it will create a different bearer for voice and video. So, for voice QCI 1 will be used and for video QCI 2 will be used. QCI is QS class identifier, which ranges between 1 to 9. So, default bearer will have a QCI from 6 to 9. It can be anything.

And then, IMS signaling bearer will have QCI 5. Then, voice bearer will have QCI 1. Video bearer will have QCI 4. So, at a time, UV can have four bearers. One default, one IMS, one voice and one video bearer. If UV is performing both data browsing plus voice call plus video call. So, this is how a bearer will be created. So, I think we covered all the components in the network. So, that's all in this session. I will see you in the next one. Thank you.

Want the rest of 5G Core?

Get the full course syllabus and fees.

The full course is paid (₹40,000). We'll send the syllabus and call you back within one working day.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Full course · paid

Unlock the full 5G Core course

The remaining 24 lessons, mentor-reviewed projects and a certificate come with the paid course (₹40,000). Leave your details: we'll send the syllabus and fees and call you back.

Get the syllabus and fees

A counsellor calls you back within one working day.

By submitting you agree to our Terms and Privacy Policy.

Grow by Skill-Lync · free lesson

Start watching

Free, no payment. Leave your details once and every free lesson on Grow plays straight away. A Skill-Lync counsellor may call you about the full 5G Core course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.