UPSC ESE Mechanical cut-off: 2022 to 2025, every stage and category

UPSC's own cut-off marks for ESE Mechanical Engineering over the last four completed cycles: the prelims, written and final cut-offs for each category, how many vacancies there were, and a checker that compares your marks with every year.

Status as of 16 Nov 2026, 15:30 ISTLatest official cut-offs: ESE 2025. ESE 2026 cut-offs come with its final result.

ESE 2026 interviews ended on 30 Oct 2026; UPSC publishes cut-offs only after the final result. ESE 2027 prelims: Sun 31 Jan 2027, Mechanical Paper II (code 21) in the afternoon session.

Checked against UPSC's official notices. Compiled by Skill-Lync. Updated 16 Nov 2026.

What was the ESE Mechanical cut-off in 2025?

For General candidates in ESE 2025 Mechanical Engineering: 238 out of 500 in the prelims, 570 out of 1,100 in the written stage (prelims plus mains), and 758 out of 1,300 for the last candidate UPSC recommended. OBC was 236, 511 and 709; SC 197, 425 and 662. There were 72 Mechanical vacancies.

2025 prelims, Gen238/500
2025 written, Gen570/1100
2025 final, Gen758/1300
2025 vacancies72

Prelims (Stage I), out of 500 (Paper I + Paper II)

YearGeneralEWSOBCSCST
ESE 2025238208236197211
ESE 2024217202217184153
ESE 2023173173173153138
ESE 2022236236232211170

Written (Stage I + II), out of 1,100 (prelims + mains)

YearGeneralEWSOBCSCST
ESE 2025570419511425468
ESE 2024537519521450348
ESE 2023445367445362382
ESE 2022581571524490440

Final (all three stages), out of 1,300 (last recommended candidate)

YearGeneralEWSOBCSCST
ESE 2025758632709662698
ESE 2024725702701658491
ESE 2023661640623555593
ESE 2022745735716660592

Source: UPSC's "Recommendation Details and Cut-off Marks" for ESE 2022, 2023, 2024 and 2025 (links below). The prelims and written cut-offs are UPSC's minimum qualifying standards; on top of them UPSC required a minimum in every paper (15% in each prelims paper; usually 20% in each mains paper). PwBD cut-offs are in the same UPSC documents.

How has the ESE Mechanical cut-off changed since 2022?

The General final cut-off ranged from 661 (2023) to 758 (2025) out of 1,300 between 2022 and 2025. From 2024 to 2025 it went up 33 marks, and the prelims cut-off went up 21. Vacancies moved from 23 to 72 over the same year.

0%20%40%60%47535720223540512023434956202448525820250%20%40%60%4753572022354051202343495620244852582025
Prelims Written Final. General-category cut-offs for ESE Mechanical, as a percentage of the maximum marks at each stage (500, 1,100 and 1,300), so the three stages share one scale.

In 2025, Mechanical's General final cut-off was the highest of the four ESE streams (Mechanical 758, Civil 719, Electrical 686, Electronics and Telecom 661). The streams have different papers, so compare cut-offs within a stream, not across them. Other streams: ESE Civil cut-off, ESE Electrical cut-off, ESE Electronics and Telecom cut-off.

How many ESE Mechanical vacancies were there, and how many were selected?

Mechanical had between 23 and 72 vacancies a year from 2022 to 2025. In each year UPSC's main list was shorter than the vacancy count, and it kept a reserve list from which further candidates can be recommended.

YearVacanciesGeneral vacanciesRecommended (main list)Reserve list
ESE 202572336122
ESE 202423101810
ESE 202357294622
ESE 202239203410

Recommended = non-PwBD plus PwBD candidates in UPSC's main list. Vacancies include those reserved for PwBD candidates. The ESE 2027 notice expects about 480 vacancies across all four streams; the Mechanical share is published only with the final result.

Check your marks against past ESE Mechanical cut-offs

Enter what you have, from a mock test or a past attempt. Leave a box empty to skip that stage. Mains marks are out of 600 and are added to your prelims marks for the written stage; the interview (out of 200) is added for the final stage.

YearPrelimsWrittenFinal

"Clears" compares your total with UPSC's cut-off for that year and category. It ignores UPSC's per-paper minimums (15% in each prelims paper, usually 20% in each mains paper), so check those yourself. Past cut-offs are a guide, not a prediction for 2027.

When will the ESE 2026 Mechanical cut-off be released?

After the ESE 2026 final result. UPSC's prelims result note of 26 Feb 2026 says marks and cut-offs are uploaded only after the whole examination, including the interviews, is over. ESE 2026 interviews ran from 21 Sept to 30 Oct 2026, and the final result was not out as of 16 Nov 2026.

For ESE 2027, the Mechanical prelims is on Sun 31 Jan 2027 and the mains on 18 Jun 2027. Every date and the exam pattern are on the UPSC ESE 2027 page.

Which services does ESE Mechanical recruit for?

12 services and posts in the ESE 2027 notice, including AEE in GSI Engineering Service Gr 'A'; Indian Naval Material Management Service (Mechanical Engineering Posts); Defence Aeronautical Quality Assurance Service/SSO-II (Mechanical). Your allotment depends on your final rank and the order of preference you give UPSC.

  • AEE in GSI Engineering Service Gr 'A'
  • Indian Naval Material Management Service (Mechanical Engineering Posts)
  • Defence Aeronautical Quality Assurance Service/SSO-II (Mechanical)
  • AEE (Electrical and Mechanical) in Border Roads Engineering Service (Mechanical Engineering Posts)
  • Indian Skill Development Service
  • Indian Railway Management Service (Mechanical)
  • Indian Railway Management Service (Stores), Mechanical Engg. Posts
  • Indian Defence Service of Engineers
  • Indian Naval Armament Service (Mechanical Engineering Posts)
  • Central Water Engineering (Group 'A') Service
  • Central Electrical and Mechanical Engineering Service (Mechanical Engg.)
  • Central Power Engineering Service Gr 'A' (Mechanical Engineering Posts)

What is a safe score for ESE Mechanical?

UPSC doesn't publish one, and the cut-off depends on vacancies and how everyone scores. The official numbers give a range: the General prelims cut-off for Mechanical was 173 to 238 out of 500 between 2022 and 2025, and the General final was 661 to 758 out of 1,300. Clearing the higher end of each range would have cleared every one of those four years.

Most ESE candidates write GATE too, since the core syllabus overlaps and GATE comes first. Useful next pages: GATE Mechanical cut-off and the GATE ME subject-wise weightage with solved questions.

What changed in ESE 2027 so far

Every official ESE 2027 notice that changed a date or a number, newest first. Skill-Lync updates these pages on the same URL when UPSC posts a new notice.

  1. UPSC published the ESE (Preliminary) 2027 time table: both papers on Sunday 31 Jan 2027, Paper I 9:30 to 11:30 AM, Paper II 2:00 to 5:00 PM.
  2. Online applications for ESE 2027 closed at 6:00 PM.
  3. UPSC notified ESE 2027 (Examination Notice 02/2027-ENGG) on the date in its annual calendar: about 480 vacancies (474 in 2026), prelims 31 Jan 2027, mains 18 Jun 2027, 48 prelims centres (50 in 2026; Noida and Faridabad dropped).

Official sources for this page

If a UPSC notice differs from this page, the UPSC notice is right. Dates marked 'not announced' have not been published by UPSC yet; we don't guess them.

Government exams and a core engineering career

Talk to a counsellor.

Ask about Skill-Lync's FEA, CFD, EV, embedded and BIM programs, and how they fit around ESE or GATE preparation.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.