Week 8 Part 9 Project 3 - Surface Design

SCREEN SHOTS:   B SURFACE:   C SURFACE: CLOSED SURFACE: B SIDE FEATURES: TOOLING AXES: DRAFT ANALYSIS:

\ 

SCREENSHOTS:

ScreenShots:

#I have already completed this challenge as well as the complete course but this challenge is not updated# Support Engineer: P.Akash PROPELLER: https://drive.google.com/open?id=1OhBs0S-tfW1EOyAUEGjZ6p_xbDrdEfZE   HULL: https://drive.google.com/open?id=1MA-E7l6sTg9PagmAy-fJ44ymKcyCKShQ   RADAR: https://drive.google.com/open?id=1YYln6FqOeiHYj99wLHbIqsBAk2dQBEFW…

#I have alredy completed this course and also this challenge and got course completed certificate# Support engineer: Kashyup. Objective: To model the fender using CATIA.   https://drive.google.com/open?id=1zAJCI7oC-3CmOAsWYr1hG5kvLC3C7Dx9   Tool used:  Catia   Design requirements: Skin data  …

1.Fuel tank   Procedure: Change the names Front plane to Mid plan fuel, Top Plane to Bottom plane fuel & Right plane to front plane fuel. Select the mid plan fuel and insert the sketch with given directions. Select the midplane fuel and draw a horizontal construction line of 831mm to left and vertical line of…

1.Oil tank   Procedure: Rename front plane as midplane for reference. Draw a horizontal construction line of 230mm towards left. Add two points one on the origin and one above the origin at a distance of 146mm make sure the above point is vertical to the origin. Select dynamic mirror entities option and start drawing…

1.CHASSIS   Procedure: Rename top plane to bottom plane and front plane to midplane chassis. Select the midplane chassis and choose sketch tools and click on sketch picture and add the picture of the chopper. After adding the picture move the picture -930mm in X-direction and -805mm in Y-direction. Select midplane…

1.Fuel tank  Procedure: Change the names Front plane to Mid plan fuel, Top Plane to Bottom plane fuel & Right plane to front plane fuel. Select the mid plan fuel and insert the sketch with given directions. Select the midplane fuel and draw a horizontal construction line of 831mm to left and vertical line of 441…

Objective: To find whether the given model satisfies for europian standards or not. Europian Standards of Wheel Arc: According to the europian standards all SA, SA, SC, SD, SE should have 10mm of clearance then only it will satisfy europian standards.   After applying the europian standards to the given model this…

RENDERING OF AMERICAN CHOPPER Procedure: Open assembly file and go to tools, and add-ins and add photo-view -360. Go to assembly and click on mates and add tangent relation to the top plane and two tires. Apply a tangent related to the top plane and the kickstand. Edit the kickstand in the assembly and edit the sketch…

\           DESIGN AND MODELLING OF MINI ELECTRIC TRACTOR                                          INDEPENDENT PROJECT   Objective: To design and model the mini tractor. Software used:…

Design of Bracket using NX   Introduction: Sheet metal is metal formed by an industrial process into thin, flat pieces. Sheet metal is one of the fundamental forms used in metalworking, and it can be cut and bent into a variety of shapes. Countless everyday objects are fabricated from sheet metal. Thicknesses can…

CASING DESIGN USING NX CAD   Objective: To develop casing using sheet metal application in NX Cad tool.   Introduction: Sheet metal is metal formed by an industrial process into thin, flat pieces. Sheet metal is one of the fundamental forms used in metalworking, and it can be cut and bent into a variety of shapes.…

DESIGN OF ODD SHAPE ENCLOSURE USING NX   INTRODUCTION:   Sheet metal is metal formed by an industrial process into thin, flat pieces. Sheet metal is one of the fundamental forms used in metalworking, and it can be cut and bent into a variety of shapes. Countless everyday objects are fabricated from sheet metal.…

BOX ASSEMBLY DESIGN USING NX CAD   OBJECTIVE: To design BOX ASSEMBLY using NX cad tool. Introduction: Sheet metal is metal formed by an industrial process into thin, flat pieces. Sheet metal is one of the fundamental forms used in metalworking, and it can be cut and bent into a variety of shapes. Countless everyday…

1. Transmission belt Procedure: Select part design. Make units to metric. Select the extrude option . Now select the front plane and select line command. Draw a line starting from the origin to some extent and drag the mouse back to the point and move forward now draw an arc above to the origin. Continue drawing line…

1.FRONT WHEEL   Procedure: Select the front plane and draw a midline from the origin to left and deselect the midline and draw a rectangle of 300 horizontal and 45mm vertical. And draw a sketch as shown and revolve boss. Select the right plane and draw a verticle construction line and one more construction line from…

  1.Propeller Procedure: Select the right plane and sketch as shown and revolve it. Select the top plane and draw a rectangle and give dimensions as shown. Make a reference plane by selecting the top plane and give a distance of 360mm and sketch a rectangle on that plane and provide dimensions as shown. and then apply…

Fender design Link:   Objective: To model the fender using CATIA.    Tool used:  Catia   Design requirements: Skin data   Fender: Fender is the English term for the part of an Automobile, motorcycle or other vehicle body that frames a wheel well (the fender underside). Its primary purpose…

  Objective: To develop the roof with necessary components using given skin data. To do curvature study and calculate heat distortion criteria and snow load condition. To find the section modulus. Cad Models:   Roof: An automobile roof or car top is the portion of an automobile that sits above the passenger compartment,…

    AIM: To develop automotive back door using CATIA tool. Design requirements: outer upper and lower panel reference. Tool used: CATIA V5 Components in Back  Door: Inner panel Outer Upper Panel Outer Inner Pannel Reinforcements Design considerations: Rear visibility Latch & Striker reinforcement Hinge…

Aim: To design a hood inner panel. To design hood outer panel with hem. Today develop necessary reinforcement. To provide necessary mastic data. Tool used:        CATIA Design Requirements: Skin data. Master sketch. Hemming data. Hood thickness information. Hinge And Latches. Master section: This is…