Week 8 - Challenge 1 - Base Bracket Design

SUMMARY:

       WE RECEVIED CLASS A SURFACE.WE CREATED THE TOOLING AXIS USING THIS INTRECTION METHOD WITH THAT WE CREATED THE LINES AND TOOLING AXIS AFTER THAT WE SPLIT THE COMPLETE WITH THREE PROFILE. WE CREATED RIB AND OFFSET  AND CLOSED SURFACE WITH RIBS USING TRIM. WE USE EDGE FILLET WITH RADIUS OF 3+THICKNESS OF THE SURFACE OF 2.5=5.5.THEN WE USE BOUNDARY WITH CLASS A SURFACE  AND USE SWEEP WITH DRIFT DIRECTION ALONG DOWNWARD DIRCTION WITH 3 DEG DRIFT WITH 20MM. AFTER THAT WE USE SAME SWEEP FOR THE TWO CIRCLES IN CLASS A SURFACE AND THEN THE DRAFT SURFACE IS CALLED IS CALLED  C SURFACE AFTER CREATING THE  C SURFACE WE USE JOIN OPTION TO JOIN THE THREE SURFACE TO CREATE THE SINGLE SURFACE .AFTER THE SURFACE CREATION WE MOVE THE SURFACE INTO PART DESIGN WE USE CLOSED SURFACE OPTION TO THE SURFACE AND CLICK OK AFTER WE GET FULL DEFINED CLASS A SURFACE