Week 7 Challenge - Assembly Workbench

 Quick Return Mechanism

Procedure for Assembly Design

• First we create the product file, and rename it by ‘Quick Return Mechanism’.
• Add a part using ‘Part’ tool and rename it ‘Reference elements’ and instance name ‘Skeleton elements’.
• Fixing the Referance elements part using the Fix component tool.
• Adding the Body1, Body2, Body3, Body4, and Body5 using Existing component tool.
• Giving the required axis to all the parts in the product using Axis tool.
• After that using the Publication tool, publicizing all the Referance elements ( Point, plane, and axis) of all the parts including Referance elements part.
• First we coinciding Ref point in Referance elements and Ref point in Body2. To fix the position of Body2.
• After that coinciding xy plane from Body2 and xy plane from Referance elements. For restricting the degree of freedom to only xy plane.
• Coinciding Ref axis from Body1 and Ref axis from Body2. And giving surface contact of the top face of Body2 and the bottom face of Body1. Due to this Body1 is restricted to only rotation motion around the axis of Body2.
• Coinciding inner face edge from Body1 and outer face edge from Body3.
• Coinciding Ref axis from Body3 and Ref axis from Body4. And giving surface contact of the top face of body3 and the bottom face of Body4. For restricting the motion to the only rotation of Body4
• Coinciding Ref axis from Body4 and Ref axis from Body5.
• Coinciding Ref axis from Body5 and yz plane from Referance elements.
• Giving the offset constraint of 145mm to Ref axis from Body5 and Ref point from Body1.
• Coinciding the top face of Body5 and the top face of Body4.
• Using the save management for save files.

CV Joint

Procedure for Assembly Design

• First we create the product file, rename it by ‘CV Joint’.
• Add a part using ‘Part’ tool and rename it ‘Reference elements’ and instance name ‘Skeleton elements’.
• Fixing the Referance elements part using Fix component tool.
• Adding the Body1 twice, Body2, and Body3 twice using Existing component tool.
• Giving the required axis to all the parts in product using Axis tool.
• After that using Publication tool, publicizing all the Referance elements ( Point, plane, and axis) of all the parts including Referance elements part also.
• Coinciding Ref point from Body2 and Ref point from Referance elements. To fix the position of Body2.
• Coinciding zx plane from Body2 and xy plane from Referance element. For correcting the position of Body2 and restrict for rotational motion.
• Coinciding axis2 from Body1 and axis2 from Body2, and axis3 from Body2 and axis4 from Body1.
• Giving offset of 70mm to xy plane from Body1 and xy plane from referance elements. For sitting the Body1 in correct location.
• Above same procedure follow for giving relation between another Body1 (Body1.2) and Body2.
• Now coinciding yz plane from Body1 and yz plane from Body3. For restricting motion of Body3 in only yz plane.
• Coinciding axis1 from Body1 and axis21 from Body3, and axis3 from Body1 and axis11 from Body3. For give only rotational movement around axis1 and axis3 from Body1.
• Above same procedure follow for giving relation between another Body1 (Body1.2) and another Body3 (Body3.2).
• Using the save management for save files.