Week 6 Challenge

In this week the heat exchanger is first designed as a preliminary basis using Aspen Hysys. There we can get a preliminary assumption of the Heat Exchanger design. The Process Data are taken as input for the detailed exchanger design using Aspen Exchanger Design and Rating. The Data from Aspen Hysys can be imported in Aspen EDR to progress further. In Aspen EDR further detailed design of the Heat Exchanger is continued.

To generate the TEMA datasheet, first the process data are imported from Aspen Hysys then to get control over all the parameters i have selected rating/checking tab. The exchanger geometry is now gradually changed to meet the specification requirements keeping in mind that the overdesign shoud be within 20 percent.

The various details for the exchanger design are shown in below images.

The Geometry Summary for the Heat exhanger is shown in below image:

The Overall Summary for the Heat exchanger is shown in below image:

The Flow Summary and Vibration Analysis for the Heat exchanger is shown in below image:

The TEMA Sheet for the Heat Exchanger is shown in the below image:

The Warnings and Errors for the Heat Excahnger is shown below:

The TEMA Sheet is as asked in the question is shown in the above images. The percent overdesign is below 20 percent, it is shown in the overall Summary.

NOTE: For better analysis i have attached the Aspen Hysys file and the Aspen EDR file for the Heat exchanger as the RAR file.