Week- 5 - Solid meshing

1 FIRST STEP OF EVERY MESHING PROCESS IS TO FIRST CHECK THE GEOMETRY AND FIX ALL THE GEOMETRICAL ERRORS.

2 AFTER FIXING GEOMETRY WE DO TOPO TO ATTACH THE DESIGN FACES

3 GO TO MESH DROP DOWN AND THEN SELECT LENGTH AND THEN PERIMETER AND ENTER 1 IN THE DIALOG BOX.

4 THEN MEASURE EVERY SURFACE LENGTH IF IT IS LESS THAN MINIMUM LENGTH DO THE NECESSARY CORRECTIONS.

5 THEN ENTER MINIMUM AND MAXIMUM LENGTH IN THE QUALITY CRITERIA

6 AND START THE SURFACE MESHING ALL CURVED SURFACE WILL BE MESHING IN ORTHO TRIA FORM AND STRAIGHT SURFACE WILL BE MESHING IN MIXED FORM

7 AFTER MESHING EVERY PARTS SURFACE.

8 THEN DEFINE ALL THE FOUR PARTS IN VOLUMETRIC DROPDOWN MENU FOR VOLUMETRIC MESHING.

9 AFTER DEFINE THERE WILL BE ERROR IN THE PARTS WHICH HAVE VERY CLOSE SURFACES. SO YOU HAVE TO REMESH IT TO GET IT IN VOLUMETRIC MESH

10 CHECK THE QUALITY CRITERIA FOR SOLIDS, COLLAPSE SHOULD BE 0.2 IN THIS MODEL.

11 AFTER CHECKING AND FIXING ALL THE CRITERIA, OUR VOLUMETRIC MESH IS READY