Challenge

State Flow using Matlab Simulation

Washing Machine Simulation:

Washing machine has following states:

Input variables:

Power, Water.

Initial state:

In this state, Washing machine is in power off mode. The input variables in this state are:

power = 0

System Activated:

In this state, Washing machine is in power on mode. The system is getting the power supply. In this state, the input variables are:

power = 1

No Water :

Washing machine enters into this state if there is no water supply. State of input variable conditions:

power = 1

water = 0

Soaking state:

In this state, Washing machine is soaking the clothes. The input variable condition to enter this state is

water = 1;

The washing machine is in this state for 200 sec.

Washing state:

In this state, Washing machine is washing the clothes. The input variable condition to enter this state is

water = 1;

The washing machine is in this state for 100 sec.

Rinsing:

In this state, Washing machine is rinsing the clothes. The input variable condition to enter this state is

water = 1;

The washing machine is in this state for 20 sec.

Drying:

In this state, Washing machine drying the clothes. The input variable condition to enter this state is

water = 1;

The washing machine is in this state for 10 sec.

System end state:

In this state, Washing machine has washed the clothes. This ends the process.

2. Gear Simulation:

The gear has following states

INPUT:

Slider gain: To give the input during simulation time (Minimum value = 0; Maximum value = 300)

Variable: speed

Output:

Display: to display the gear number

variable : Gear

Blocks:

Idle state: