Week - 4 - 2D meshing for Plastic components

Aim:Generating the midsurface and geometry clean up on the given component and creating the mesh with low tria concentration and proper mesh flow . PROCEDURE: Download the model from the project assignment. Check the format of the model given. And import the model by selecting the proper format. Check the model if any…

Aim:Generating midsurface and geometry clean up on the given component and proper mesh flow wuth low tria concentration. PROCEDURE: Download the model from the project assignment. Check the format of the model given. And import the model by selecting the proper format. Check the model if any other component present in…

PROCEDURE: MODEL 1: Download the model from the assignment and check the model format. It is in the format of .step Import the model in the Hypermesh by selecting the .step format. Delete the solid part in the model. Go for geometry clean-up, check any red lines are present in geometry by opening the wireframe. Mesh the…

PROCEDURE: Download the model from the assessment. Import that file in the hyper mesh. The given file is mid surface so, we directly go for the meshing for the all components. Go to 2D > AUTO MESH > SELECT THE SURFACE > GIVEN ELEMENT SIZE AS = 5 > MESH. Press f10 and check any element is failing with quality…

AIM: Take the mid surface and mesh the hood component with given quality criteria. S.N. Quality      Criteria Value  1.Aspect Ratio                   5 2.Skewness                       …

AIM: For Given component create mesh with the Size of 5 Units and Create 1D element component with given cross-section and DOF. model: PROCEDURE: 1.Imort the model using import geometry which is in .iges format.click on import 2. creating the midsurfae using auto midsurf. Geometry>midsurface>automid>select…

AIM: To perform the morphing for model 2 given the assignment and increase the hight of the Dog houses and ribs. PROCEDURE: Download the model and check given model is in the format of .step Go for geometrical errors from geometry check tab. If any errors are present solve those errors. we can directly go for the morphing…

AIM; For the given Rear door FE model, Create and Apply different PIDs for different components. By using the same technique and the elements as shown in the video, Perform suitable connections. PROCEDURE: Download the model from the challenge. In the given we find all component in same PID. So For simple connections and…

For the given intake Mindfold component,check for the geometrical errors and mesh the surfaces with the given 2D elements quality criteria given below.    Quality Criteria                  values      target/ average length       …

AIM: For the given Rear View mirror component, check for the geometrical errors and mesh the surfaces with the given 2D element quality criteria’s given below. S.No.     Quality criteria                               …

This tool test carries two models (i.e. Plastic model, Sheet metal model). For both the models, Mid surface should be taken and meshed as per below quality criteria. Thickness should be assigned to both the models.  (Refer “Model Requirements” in “Grading Policy”  to know what to be done in the model)   Quality Criteria: …

This tool test carries two models (i.e. Plastic model, Sheet metal model). For both the models, Mid surface should be taken and meshed as per below quality criteria. Thickness should be assigned to both the models.  (Refer “Model Requirements” in “Grading Policy”  to know what to…

AIM-For the given Plastic Bottle Cap model, check for the geometrical errors and take the mid surface by suitable mid surfacing techniques. PID and Thickness assignment has to be done for all the mid surfaces. Mesh the given model with given element Quality criteria.  Download the given model and check the format…

AIM:            Meshing the mid surface with the given element quality criteria for the given hood model by taking the mid surface for all the components after checking the geometrical errors. AIM:        1.   Meshing the mid surface with the…