Week 10 - Challenge 2- Attachment Feature Creation (Dog House)

EXPLANATION :

EXTRACTED CLASS A FROM CAD DATA

1.FROM CLASS A CREATED TOOLING AXIS IN WHICH BY ALL THE SURFACE IS VISIBLE

2.CREATED CLASS B SURFACE WITH RESPECT TO THE DIRECT OFFSET METHOD

3.WITH BOUNDARY COMMAND CREATED CLASS C SURFACE

4.FOR C SURFACE I HAD CREATED OUTER BOUNDARY WITH THE MINIMUM SWEEP DIRECTION OF 3 DEG

5.I HAD JOINED C SURFACE WITH A SURFACE USING JOIN COMMAND

6.CREATED DOG HOUSE WITH RESPECT TO THE TOOLING DIRECTION

7.FINALLY I HAD CREATED CLOSED BODY AND DRAFT ANALYSIS IS PERFORMED

*THICKNESS

*HEIGHT

*DRAFT WITH 0.5 DEG

*THICKNESS 2.5mm