Underbody Coating

UNDERBODY COATING :

Undercoating is the sprayed application of a wax or rubber-based composite onto the entire underside of the vehicle. It's designed to create a rust-proof layer between the underside of the vehicle and the water, ice, and salt of the road. Undercoating provides a more comprehensive protective layer for your vehicle.

(1)Protects Against Rust & Corrosion.

The primary objective of getting underbody coating done is to prevent metal components that are exposed on the bottom side of the car to damage from corrosion. You can shut out the Adverse effects of corrosion on your car by simply applying a rubberized anti-rust coating all over the belly of your car. then it will provide protection for up to 10 years. In some cases, the time span is more than ten years, which extends the lifespan of your vehicle.

(2)Reduces NVH (Noise Vibrations Harshness) Levels

The undercoating serves as an extra layer of insulation, reducing the noise from penetrating inside components. Thus padding acts as a barrier between you and the source of the noise. If the road noise bothers you while driving your car, truck, or SUV, then applying to an undercoat can help you. experience.

(3)Prevents Paint Chipping

Running on the highway or while pacing through a city road, you will often encounter sharp gravel or any other unattended object hitting the belly of your car with high momentum. This scrapes and chips off the metal from down below. A thick layer of Underbody Coating definitely comes to aid and minimizes the effects of such contacts on the body.

(4)Risk of damage during application

Care must be taken while applying underbody coating. This thick rubberized paint if not applied properly, can get into moving mechanical parts and cause premature failures – such as into the U-joint or CV joints in a car's propeller shaft or drive shafts. They can also hinder the smooth movement of suspension components if applied incorrectly. And there’s also the risk of overspray on to the car’s paint finish on the lower edges of the car

Undercoating Steps:

1. Cleaning the underbody.
2. Applying Priming.
3. Applying Undercoating.

Undercoating Method:

1. Spray
2. Electronic
3. Drip Oil Spray
4. Dripless Oil Spray