Radar Mast & Final Assembly of Yacht

modelling Week 5 & 6 Challenge Aim: Route two electrical harnesses per the given layout and interconnect them as a single harness assembly check for bundle continuity, and bundle warnings, and then provide annotations for the final harness assembly. Objective: The objective of this project is to first route the two…

Aim:  1) To Route the following harness layout in the Electrical workbench. 2) Add protective covering on all branches connected to DT06-2S & DT06-4S connectors. Given: CAD data of the following Connectors:  DT06-4S DT06-6S DT06-2S DT06-08SA Connectors Layout Design:   Steps to be followed: 1. Download…

Q1.Download following cad data & define it as Electrical support using Electrical Part design Workbench. Define all the necessary properties. The given clip was downloaded and opened as a part file. I have to define two points that will be used as entry and exit points. Then a plane has to be defined at the points.…

iring harness design in CATIA V5 - 3D modeling Week 2 Challlenge AIM:  Download following connectors & Connector clip cad data from given link & define it as Electrical Connector using Electrical Part design Workbench. Define all the necessary properties to Connectors & Clip. Deutsch DT06 – 08SA ( https://www.te.com/usa-en/product-DT06-08SA.html)…

1.What is Design Methodology? In this methodology we learn about three design processes, we're going to study how do we proceed while doing a design. And one of the things that we take care of structuring or design tree so we'll be learning how to structure the design tree, and how to name the particular component or particular…

What is the process of project execution activity? The project execution phase is usually the longest phase in the project life cycle; and the most demanding. In the project execution phase: Your team carries out all the planned activities, constructs deliverables, and presents them to project stakeholders…

1) What is BIW & define its parts?       Body in white (BIW) refers to the stage in the automobile manufacturing in which a car body's components have been joined together, using one or a combination of different techniques: welding (spot, MIG/MAG), riveting, clinching, bonding, laser…

METAL BRACKET USING NX SHEET METAL APPLICATION: OBJECTIVE: This is a project to learn the step by step procedure to create a Bracket with a gusset from the given 2D drawing. INTRODUCTION: A bracket is an intermediate component for fixing one part to another. It is used to support the weight. Brackets vary widely in shape,…

Title of the project:- Advanced Sheet Metal Design Using NX Cad Challenge_6_Bracket Objective: To design a Bracket using Siemens NX Sheet metal application. Introduction:-   1. SIEMENS NX:- NX formerly known as "unigraphics", is an advanced high-end CAD/CAM/CAE, which has been owned since 2007 by Siemens PLM Software.…

Title of the Project : Advanced Sheet Metal Design Using NX Cad Challenge_5_Odd Shaped Enclosure Objective : To design a Sheet Metal Design Using NX Cad sheet metal application. Introduction :  Unigraphics NX (also known as Siemens nx) is an advanced High-end CAD/CAM/CAE software package…

TITLE OF THE PROJECT: Advanced sheet metal design using Siemens NX cad - Box Assembly. OBJECTIVE: To design a box assembly and create a draft of it using Siemens NX Sheet metal application. INTRODUCTION Sheet metal is metal formed by an industrial process into thin, flat pieces. Sheet metal is one of the fundamental forms…

                                                 Design of casing by using NX cad OBJECTIVEVE :-   To design a sheet metal casting using NX Cad software with suitable commands to achieve the final product as per the inputs. INTRODUCTION :  In Sheet metal Application we can create a uniform thickness Sheetmetal parts using…

AIM: Create the Dog House for the Door Trim considering from the given Class-A surface. To Create the tooling axis for the given Class-A Surface meeting the requirements of the draft angle. To Attach B side Features in the component. To perform the Draft analysis on the model.  TOOLS USED: Boundary Join Multiple extract…

BUMPER DESIGN – CHALLENGE 4 AIM Create the Bumper Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model. INTRODUCTION A bumper is a structure…

Abjective: The main aim of this challenge is to create a solid body of 'Door Trim Lower' with the help of the closed surface method by using the 'Generative shape design' workbench in CATIA V5. Performing the 'Draft Analysis' on the solid part body of the Door trim. Given sample design Overview:Initially, we need to offset…

                                 DOOR HANDLE Tooling Axis creation: It is defined as the direction in which the mould/core and cavity open. Selection of the direction of the tooling axis depends on the ease at which components can be easily…

DESIGNING A PILLAR USING MASTER SECTION OBJECTIVES To improvise the Class A surface by resolving bad patches and adding flanges to it.  To create A pillar solid model with the help of  improvised class A surface. To create B side features for the A Pillar using the master section given to us as an input. To create…

AIM: To Create the Core and cavity blocks for the switch bezel component. DESCRIPTION:   1. CREATING TOOLING AXIS -                       The Tooling Direction is basically the direction that the mold pulls a part. The mold is built in two separate pieces, basically. You have a Cavity side and you have the Core side. The…

AIM:  to make a model from the provided class-A surface. INTRODUCTION: CLASS-A SURFACE: a surface made by the designer which is given as an input to the plastic modeler to work on. It is aesthetic surface and the outer most surface. CLASS-B SURFACE: a surface below a certain thickness from the class-A…

COIN HOLDER To create a coin holder plastic component by closed method with reference to the class A surface and do the draft analysis for the component. Steps followed The class A surface is checked for the connectivity of the surface and ensure it is completely joined and there will be no gap between the surfaces. If…

Report : Tooling axis creation : in this cat part, we have 3 walls to create the bisecting line from planes x-axis and y-axis  extract the base  create a point on the surface and axis system create the  3D intersection  using the axis system of y-axis and x-axis extend the lines on both sides …

SECTION MODULES OF THE HOOD OBJECTIVE: To find the section modulus of the hood and optimisation to improve the overall section modulus. Section modulus: The section modules (S) is geometric property of the cross section used for designing beams and flexural members. It does not represent anything physically. Formula of…

  ROOF DESIGN An automobile roof or car top is the portion of an automobile that that sits above the passenger compartment, protecting the vehicle occupants from sun, wind, rain, and other external elements.   The automobile roof consists of flowing parts: The outer panel Front roof rail Centre roof rail Rear…

Fender design  Objective: to design the car front fender with the help of using skin data shared by styling team and make it ready for manufacturing.   Introduction: Fender is the American English term for the part of an automobile, motorcycle, or other vehicle body that frames a wheel well. Actually, it is part…

FENDER DESIGN- WHEEL ARCH                         Submitted by SRIDHARA A     AIM: To create the report on fender regulation and to calculate the wheel arc area prove whether the car will pass the standard or not by using the European standards.  …

bench mark report