Challenge

Project

1. First step is to determine number of cells required for the battery pack

Number of cells required = (Desired pack voltage) / (Voltage per cell) = 120V / 3.6V = 33.33 cells -- 34 cells

I can consider all cells connected in Series here.

In BMS topology, I would include the following components :

Cell monitoring unit
Current and voltage sensing
balancing method (active/passive)
communication protocol - preferrably CAN
Fail safe method - SCG (Short circuit to Ground), SCS (Short circuit to Source), open circuit, sensor faliure and fault detection

2. For question 2, please refer to the slx file and scope results attached

Ship work like this
in your own course.