Project-2-Meshing of Door Inner Panel Challenge
Project 2- Door Inner Panel
Aim: To perform proper meshing of the given component.
<!-- [if !supportLists]-->1. <!--[endif]-->Creating mid surface
<!-- [if !supportLists]-->2. <!--[endif]-->Use Mixed type mesh
<!-- [if !supportLists]-->3. <!--[endif]-->Give quality criteria
Procedure: -
<!-- [if !supportLists]-->1. <!--[endif]-->Creating a Mid-Surface: - Begin by generating a mid-surface using the Auto Mid Surface tool. This process involves identifying and defining the middle plane of the component.
<!-- [if !supportLists]-->2. <!--[endif]-->Geometry Clean-up: After creating the mid-surface, proceed with the Auto Clean Up Geometry operation. This tool will automatically address gaps and errors in the geometry (only if required)
<!-- [if !supportLists]-->3. <!--[endif]-->Mesh Generation: Utilize the Auto Mesh option to generate the mesh:
<!-- [if !supportLists]-->· <!--[endif]-->Select the appropriate surface(s) for meshing.
<!-- [if !supportLists]-->· <!--[endif]-->Specify the number of elements as required.
<!-- [if !supportLists]-->· <!--[endif]-->Choose the mesh type that best suits the component.
<!-- [if !supportLists]-->· <!--[endif]-->A mixed type mesh was generated on the selected surfaces with consideration for the specified element count and mesh type
<!-- [if !supportLists]-->4. <!--[endif]-->Element Editing: Minimize the use of triangular elements (tria) wherever possible. Use the Element Edit option to
<!-- [if !supportLists]-->· <!--[endif]-->Apply the ‘split’ command to split an element whenever necessary, also used swap command under quality criteria clean up tool.
<!-- [if !supportLists]-->· <!--[endif]-->Use 'combine' to merge elements when necessary.
<!-- [if !supportLists]-->· <!--[endif]-->Utilize 'create' to generate elements, prioritizing quads and suitable element types.
<!-- [if !supportLists]-->· <!--[endif]-->Use rebuild command to rebuilt the flow of element, sometime not getting proper mesh flow, so rebuild command is more effectively used.
<!-- [if !supportLists]-->· <!--[endif]-->Efforts were made to minimize triangular elements (tria) while adjusting element positions, combining elements, and creating new elements as needed.
<!-- [if !supportLists]-->5. <!--[endif]-->Quality Criteria Check:
<!-- [if !supportLists]-->· <!--[endif]-->Access the 2D option to assess the quality of the mesh
<!-- [if !supportLists]-->· <!--[endif]-->Examine the quality index and sort elements from worst to bad
<!-- [if !supportLists]-->· <!--[endif]-->Identify and address problematic elements (highlighted in red, yellow, etc.).
<!-- [if !supportLists]-->· <!--[endif]-->Scrutinize each quality criterion (check each element).
<!-- [if !supportLists]-->· <!--[endif]-->Resolve any remaining quality issues using the clean-up tools mentioned earlier.
<!-- [if !supportLists]-->6. <!--[endif]-->Element Clean-up: To rectify poor-quality elements, employ the clean-up tools. Resolve issues by applying appropriate clean-up operations. Efforts were made to minimize triangular elements (tria) while adjusting element positions, combining elements, and creating new elements as needed.
<!-- [if !supportLists]-->7. <!--[endif]-->Provide Thickness: - to perform this action we need to first create component, of each different thickness, then provide them with a property to each different thickness part, and then assign a material for them.
After providing all this go to 2d detailed element representation.
Conclusion: - In summary, this meshing process has been conducted in a systematic and methodical manner, resulting in a high-quality mesh that meets the necessary standards. The attention to detail and commitment to quality throughout the procedure make this meshing report a valuable reference for future analysis and simulations.
i am attaching session file MVW File (.mvw), because HM File (.hm) is more than 20 mb so it is not getting attached.