Project 2 - Measuring distance of an object using ultrasonic sensor (HC-SR04)

                                                                 OFFLINE EMBEDDED BATCH1

#define F_CPU 8000000UL
#include 
#include 
#include 
#include 
#include 
#define LCD_Data_Dir DDRD                                     // Define LCD data port direction 
#define LCD_Command_Dir DDRC                                  // Define LCD command port direction register 
#define LCD_Data_Port PORTD                                   //Define LCD data port 
#define LCD_Command_Port PORTC                                //Define LCD data port 
#define EN PC2                                                // Define Enable signal pin 
#define RW PC3                                                //Define Read/Write signal pin 
#define RS PC4                                                // Define Register Select (data reg./command reg.) signal pin 

void LCD_Command (char);                                      // LCD command write function 
void LCD_Char (char);                                         // LCD data write function 
void LCD_Init (void);                                         // LCD Initialize function
void LCD_String (char*);                                      // Send string to LCD function 
void LCD_String_xy (char,char,char*);                         // Send row, position and string to LCD function 


void LCD_Command (char cmd)                                   // LCD command write function 
{
	LCD_Data_Port = cmd;                                      //Write command data to LCD data port 
	LCD_Command_Port &= ~((1<15ms 
	LCD_Command (0x38);                                       // Initialize 16X2 LCD in 8bit mode 
	LCD_Command (0x0C);                                       // Display ON, Cursor OFF command 
	LCD_Command (0x06);                                       // Auto Increment cursor 
	LCD_Command (0x01);                                       // Clear LCD command 
	LCD_Command (0x80);                                       // 8 is for first line and 0 is for 0th position 
}

void LCD_String (char *str)                                    // Send string to LCD function 
{
	int i;
	for(i=0;str[i]!=0;i++)                                      // Send each char of string till the NULL 
	{
		LCD_Char (str[i]);                                      // Call LCD data write
	}
}

void LCD_String_xy (char row, char pos, char *str)               //Send string to LCD function 
{
	if (row == 1)
	LCD_Command((pos & 0x0F)|0x80);                              // Command of first row and required position<16 
	else if (row == 2)
	LCD_Command((pos & 0x0F)|0xC0);                              // Command of Second row and required position<16 
	LCD_String(str);                                             // Call LCD string function 
}
#define Trigger_pin PA0                                          // Trigger pin 

int TimerOverflow = 0;

ISR(TIMER1_OVF_vect)
{
	TimerOverflow++;                                             // Increment Timer Overflow count 
}

int main(void)
{
	char string[10];
	long count;
	double distance;

	DDRA = 0x01;                                                 // Make trigger pin as output 
	PORTB = 0xFF;                                                // Turn on Pull-up 

	LCD_Init();
	LCD_String_xy(1, 0, "Ultrasonic");

	sei();                                                      // Enable global interrupt 
	TIMSK = (1 << TOIE1);                                       // Enable Timer1 overflow interrupts 
	TCCR1A = 0;                                                 // Set all bit to zero Normal operation 

	while(1)
	{
		/* Give 10us trigger pulse on trig. pin to HC-SR04 */
		PORTA |= (1 << Trigger_pin);
		_delay_us(10);
		PORTA &= (~(1 << Trigger_pin));

		TCNT1 = 0;                                             // Clear Timer counter 
		TCCR1B = 0x41;                                         // Capture on rising edge, No prescaler
		TIFR = 1<
Built in a Skill-Lync course
Projects like this are part of every Skill-Lync course.
Build projects like this →
More by KasilingamProject 1 - Creation of user defined data type to implement the user interfaces for working with ‘Set’ (Mathematical Set theory) using Linked ListProject 2 - Implement the Code for controlling the retraction and extension of Airplane’s landing gearProject 1 - Interfacing a 16*2 LCD with Arduino using I2C protocolProject 2 - Measuring the distance of an object using ultrasonic sensor and also smoothen the sensor data using moving average filterProject 1 -  V&V SW Analysis - I