Project 2_Creating a 3D rendered model for a Residential Building in AutoCad

Aim: creating a 3D rendered model of a residential building:

Step by step procedure as follow:

Commandas are usable:

Extrude 

Sweep 

Union

Substract 

Intersect

Revolve

Select line command and draw in top or 2D mode.

Line command is used to draw the plan.

• Command X line and draw line in X Direction as well as in Y direction.
• Trim the unwanted corner lines.
• Draw the 2D plan of residential building.
•  Now go with the 3D modelling
• Command boundary and in that select region.
• Create boundaries as well as regions of the plan.
• Extrude the regions that are the walls to the height of 10' feet from bottom.
• Floor to floor height of the building is 10' feet
• Create different type of layers using layer properties like 3D walls, window frames, slab, window glass etc as desired.
• Assign colors to each layer separately
• Line command is used to draw the windows and doors.
• Extrude the windows and doors to the suitable depth.
• Rotated 3D is used to rotate the objects as in windows and doors.
• Move and copy command is used to move the windows to their desired locations.
• Command polyline at the terrace and create the parapet wall at the top of the building.
• Command polyline and create the plinth of the building of 2' feet at the bottom.
• Create the staircase and extrude it to the distance of 3'6"feet.
• Create the mumty separately and place it on the top of the building.

• STEPS FOR RENDERING

• Go to the visualize tab from the ribbon.
• This will give access to the panels like light, sunlight, Camera, Animations, Render and Views.
• Create different views using the camera anf render the building.
• Place the lights at the desired locations.