Project 2_Creating a 3D rendered model for a Residential Building in AutoCad

   PROJECT-2

AIM:-  To Create The 3D Rendered module of residential building  using proper views and rendered views

INTRODUCTION:-

• I created a 3D Rendered module of residential building using AUTOCAD 2023.
• I am using proper layers and commands while creating the module
• I am using lot of tools while creating module

PROCEDURE:-

• Open the AUTOCAD select a new file
• Open layer properties and create more layers for creating module

• I can draw my own floor plan in 2D Wireframe by using commands RECTANGLE,LINE, OFFSET,TRIM,ERASE,TEXT,DIMALIGNED.
• THIS IS MY FLOOR PLAN

• Switch it to 3D modelling & drafting now set view as realistic
• Turn off the layers except WALLS
• using the Extrude command increase the height of wall at  2000 and using the PRESSFUL command draw the door lintels

• Now i can turn on the WINDOWS layer to create the windows
• Draw the rectangle as per window dimensions on wall
• by using the command COPY copying the rectangle and place it on wall where I want to create window
• Now select using the PRESSFUL command select the rectangle which we are created previously now press ENTER take it into inside the wall and provide the thickness of wall
• Now we are created the holes for put windows

• Now I can change the wall colour for give more beauty by using LAYER PROPETIES

• Now we create the window and apply materials to the using the tool MATERIAL BROWSE.
• Now place it the window on wall where we create holes previously .

• Now we can create the plinth level for the building using command PRESSFUL
• Select the boundary of the building and take it down and enter the value of 600
• Now we are create the steps by using the commands RECTANGLE,COPY,PRESSFUL.
• Draw a rectangle at the where i want the steps and copy the rectangle and place it down in 2 rectangles
• Now using the command PRESSFUL select the first rectangle and take it into outside the building and enter the value of thread 250
• Now again select the rectangles drag it outside give thread values 500 and 750
• Now we are created plinth and steps then I can apply materials to the plinth and steps by using command MATERIAL BROWSER

• Now we are creating the DOORS
• Turn on the DOOR layer and Turn off the WINDOWS layer
• Now I created doors as per my own dimensions by using the commands like RECTANGLE,LINE,EXTRUDE,PRESSFUL,MATERIAL BROWSER,ERASE,TRIM.

• Now place the DOORS on empty space in building for DOORS

• Now I can create the ground using commands like RECTANGLE,REGION,MATERIAL BROWSER, AND MOVE
• The I created the two columns for slab using the commands like RECTANGLE,COPY,MOVE,EXTRUDE, apply the materials by using the MATERIAL BROWSE command

• Now I can create a rectangle for slab using the command RECTANGLE
• Now give thickness to slab by using the command EXTRUDE

• Now I created a WATER TANK by using commands CIRCLE,OFFSET,EXTRUDE,PRESSFUL
• Created pipe also using command CIRCLE,OFFSET,EXTRUDE,PRESSFUL
• And apply materials by using command MATERIAL BROWSER

• Place it at top of building

• Using the CAMERA command place the camera at front side of building name it as CAMERA1
• Then go to the view manager set current the CAMERA1 and press the ENTER
• Now put the lights on four sides using CREATE LIGTH command
• Go to the RENDER tab select the RENDER ENVIRONMENT & EXPOUSER turn on the ENVIRONMENT and select the background

• Select the RENDER Tool and select the quality HIGH and select the FULLHD
• NOW select the RENDERED VIEW command take a picture of RENDERED VIEW OF FRONT SIDE

• Now using CAMERA command place camera on beside of building and focus the building
• Now using RENDER command take a picture of building

RESULT:-

I HAVE CREATED THE 3D RENDERED MODULE OF RESIDE