Project 2_Creating a 3D rendered model for a Residential Building in AutoCad

Aim: Project 2_Creating a 3D rendered model for a Residential Building in AutoCad

Procedure :

1. Draft a 2D Plan of dimensional area 18 feet x 15 feet

2. External Wall width is 8 inch

3. Internal Wall width is 4 inch

4. Openings of the door is been given wherever necessary 36 inches (900mm)

5. Using the 'Layer command' the Layers are been created for the 3D wall and 3D window. etc

6. Using the 'Boundary creation Command' and selecting region and pick point select the wall which is to be layered with a particular color.

7. Using the view cube the view is set to 3D view.

8. Using the 'Extrude Command' Extrude the walls of the building to a height of 11 ft.

9. Extrude the bottom of the wall and door to a particular height.

10. Align the Elevation plan with the face of the 3d plan.

11. Using the layer, color the window frames, Window, Using the ' Boundary creation' command.

12. Subtract the layer which is not necessary.

13. Using the Solidedit select the bottom layer of the building and paste it at the beginning of the upper floor.

14. Copy the ground floor to the upper side and edit the layers as given before.

15. Using the Visualize option from the 'Ribbon' select the camera option.

16. Before that create a circle in front of the building and then extrude it to a particular height.

17. Place the camera on that pole and create a particular view and save it as Cam1

18. Using the 'render' Command select the particular realistic view and then save it.

Conclusion: The Rendered view 3D Model is ready.