| ID |
TEST TITLE |
TEST PROCEDUIRE |
EXPECTED VALUE |
ACTUAL VALUE |
| 1 |
To set signal B is 1
when signal A is 1
and flag B is 1 ,else set signal B is 0
|
1.set signal A to 1
and flag B to 0
2.set signal A to 0
and flag B to 1
3.set signal A to 1
and flag B to 1
|
1.signal B is set to 0
2.signal B is set to 0
3.signal B is set to 1
|
1.signal B is set to 0
2.signal B is set to 0
3.signal B is set to 1
|
| 2 |
To set signal B is 1
when signal A is 1
and flag B is 1 and signal C ,else set signal B is 0
|
1.set signal A to 1
and flag B to 1 and signal
C is 1
2.set signal A to 0
and flag B to 1 and signal
C is 1
3.set signal A to 1
and flag B to 0 and signal
C is 0
|
1.signal B is set to 1
2.signal B is set to 0
3.signal B is set to 0
|
1.signal B is set to 1
2.signal B is set to 0
3.signal B is set to 0
|
| 3 |
To set signal B is 1
when signal A is 1
and flag B is 1 and signal C ,else set signal B is 0
|
1.set signal A to 1
and flag B to 1 and signal
C is 1
2.set signal A to 0
and flag B to 1 and signal
C is 1
3.set signal A to 0
and flag B to 0 and signal
C is 0
|
1.signal B is set to 1
2.signal B is set to 1
3.signal B is set to 0
|
1.signal B is set to 1
2.signal B is set to 1
3.signal B is set to 0
|
| 4 |
if the pressure valve is ON then sensor monitor pressure is VALID,else if pressure valve is transitioning from ON to OFF then sensor monitor pressure is HOLD,else monitor pressure is INVALID |
if(pressure valve is ON)
else if (pressure valve is transitioning from ON to OFF)
else (monitor pressure is INVALID)
|
if(pressure valve is ON){sensor monitor pressure is VALID}
else if (pressure valve is transitioning from ON to OFF){sensor monitor pressure is HOLD}
else {monitor pressure is INVALID}
|
if(pressure valve is ON){sensor monitor pressure is VALID}
else if (pressure valve is transitioning from ON to OFF){sensor monitor pressure is HOLD}
else {monitor pressure is INVALID}
|
| 5 |
the sysytem works if and only if all the sensors are connected.the environmental effects ,malfunction of sensors may have effects on the system |
if(system works ON)
else(environmental effects ,malfunction of sensors may have effects on the system)
|
if(system works ON)
{all the sensors are connected}
else{environmental effects ,malfunction of sensors may have effects on the system}
|
if(system works ON)
{all the sensors are connected}
else{environmental effects ,malfunction of sensors may have effects on the system}
|