Project 1 - Parsing NASA thermodynamic data

1Write a function that extracts the 14 co-efficients and calculates the enthalpy, entropy and specific heats for all the species in the data file. You will be reading this file For Nasa thermodynamic data. The formulae are shown below.  Here R is the universal gas constant, T is the temeprature if s{x}=='1' smt(i)=str2num(s{x-1});…

Genetic Algorithm INTRODUCTION: Genetic algorithms are randomized search algorithms that have been developed in an effort to imitate the mechanics of natural selection and natural genetics. Genetic algorithms operate on string structures, like biological structures, which are evolving in time according to the rule…

SOLVING SECOUND ORDER ODE AIM:       To solve a secound order ODE and simulate the simple pendulam motion by using MATLAB. GIVEN DATA'S: L=1 metre, m=1 kg, b=0.05. g=9.81 m/s2. Angular displacement = 0 Angular velocity = 3 rad/sec T = 0 EXPRESSION: g = Gravity in m/s2, l  = Length of the pendulum in…

The below google drive link contains all the documents and files related to the Final Independent Project, THE FILE CONTAING, *SPACE X DRAGON PART, RENDERED IMAGES, PROJECT REPORT , DRAWING FILE AND IMAGES.  DRIVE LINK:https://drive.google.com/file/d/1GiveiR0HIM-TGvCdfRsZhovAcTwZi9X4/view?usp=sharing   SPACE…

https://drive.google.com/file/d/1YWDPSXGrn8eRsMcB3zhwpO2VG7TKLxXu/view?usp=sharing   FINAL ASSEMBLY: IN THIS CHALLENGE I AM FINAL ASSEMBLY OF YACHT. IN THIS LINK HAVING ALL PARTS AND FINAL ASSEMBLY AND PROJECT REPORT.   DRIVE LINK : https://drive.google.com/file/d/1YWDPSXGrn8eRsMcB3zhwpO2VG7TKLxXu/view?usp=sharing

1.REAR WHEEL IN THIS DESIGN LINE,CIRCLE,LINEAR PATTERN,CIRCULAR PATTERN,POWER TRIM,CONVERT ENTITIS, EXTAND,REVOLVE,EXTRUDE CUT,REVOLVE CUT, THESE COMMANDS ARE USED. IN THIS DESIGN HAVING A FOUR PARTS *DISC *TIRE *RIM *SPROCKET 2. FRONT FORK IN THIS DESIGN  LINE,CIRCLE,EXTRUDE,EXTRUDE CUT, REVOLVE, MOVE,REFARANCE PLANE,MIRROR,SURFACE…

1.CHAIN IF THE CHAIN WAS DESIGNED BY BY USING  LINE,CIRCLE,MIRROR AND TRIM . THEN MAIN COMMAND IS LINEAR PATTERN.IN THIS COMMAND 2.PEDAL IF THE WAS DESINGNED AND MOSTLY USED COMMAND SPLINE.THEN  LINE,TRIM,CIRCLE COMMANDS ALSO USED. 3.OIL TANK IN THIS PART USED AS A RESARVOIR. THEN LINE,SPLINE,TRIM,CIRCLE,EXTAND,COMMANDS…