Project 1 - Interfacing a 16*2 LCD with Arduino using I2C protocol

Project : implementing the Code for “Interfacing a 16*2 LCD with two Arduino’s (one for Master and one for Slave) using Inter-Integrated Circuit (I2C) communication protocol” by sending the message to LCD using I2C communication protocol and display the message on LCD screen.

#include <wire.h> / for I2c communication function\

#include<LiquidCrystal.h> / LCD library function\

LiquidCrystal lcd(13,12,5,4,3,2); / digital pins of aurdino\

void setup()

{

Serial.begin(9600); /serial communication 9600 baud rate\

lcd.begin(16,2); / lcd Intialisation\

Wire.begin(1); /begin I2c communication at fin A4&A5\

Wire.onReceive(myfunction);

}

void myfunction(int p)

{

int a=Wire.read();

lcd.setCursor(4,0); / set cursor at 4^th place in Lcd\

lcd.print(a); / Required data print\

delay(500);

}

void loop()

{

}

b) code

#include <wire.h>

void setup()

{

Serial.begin(9600);

Serial.println("master"); /help to print console PC\

Wire.begin();

}

void loop()

{

int mydata=18;

Wire.beginTransmission(1);

Wire.write(mydata);

Wire.endTransmission();

}

https://www.tinkercad.com/things/8S7y1QI2uoQ-ingenious-jaban-bruticus/editel?sharecode=CVV-ziAF9N-3H3NRFxzLTAVUuFZI-hC6LoJ3CpXqM4M