Project 1 - 2D meshing on the instrumental Panel

Aim : Proper Mid surfacing, Good Mesh Flow, No OFF elements, Thickness Assignment

Procedure : - manual meshing with mid surface extraction - Import -> Cons resolution by Length option in Mesh modeule. -> Give TOPO ->Checking the geometrical errors. ->Clearing the geometry errors. ->Creating the midsurface. -> Setting a new pid for the newly created midsurface also adding thickness to it -> Batch meshing - Import -> Cons resolution by Length option in Mesh modeule. -> Give TOPO ->Checking the geometrical errors. ->Clearing the geometry errors. ->Creating the midsurface. -> Setting a new pid for the newly created midsurface also adding thickness to it. ->Batch meshing -> new -> Meshing scenario -> edit -> content -> export the module from pending to meshing scenario then click on 'OK' -> Edit -> set meshing and quality crateria -> RUN -> Checking and resolving the Tria and Rotating Quard -> Finishing the model with proper mid surface and proper good mesh with thickness assign. (note - file name procedures.pdf contain the procedure with photo and step taken)

Learning Outcomes : Learn mid surface extraction with proper feature capture and making proper meshflow

Conclusion : Able to solve error and handle as well. learn to extract mid surface moslty of feature present in the model. learn to deal with error in mesh flow and mesh quality, take corrective decision on to it.

Note :- file size is too big to upload so drive link is provided...!

ansa file (136mb)

https://drive.google.com/file/d/18Hkl5A-YX_dxSvlpmyZUSZ1pbbjGlxLU/view?usp=sharing

procedures.pdf file (<3mb)

https://drive.google.com/file/d/10MMzg1VO6D_qcvx2qh4ozT7LnM0d06NG/view?usp=sharing