Project 1

PROJECT 1

AIM:

To create a Wiring harness assembly and route the harness on then given engine catia part

OBJECTIVE:

To create the wiring harness assembly for the given catia part with all the provided connectors and clips. and cover the ignition area with proper channel coverings

SOLUTION METHODOLOGY:

STEP 1:

placing of engine part in the harness assembly module and make the engine electrically difined. Then place the engine in a assembly module

STEP 2:

convert all the connectors into a electrical part and place it in the seperate file

STEP 3:

properlly place all the given clips in the engine part

STEP 4:

make the given channel into a electrical connector part with proper dimension of starting point and ending point and place them in the right side and left side of the engine part

STEP 5:

route all the connectors to eachother with proper bending radius and slack. make sure the bundle is properly routed in the engine assembly (which is not colliding with engine part and making sure it is passing through all the clips and the channels properly)

STEP 6:

save all the things in a proper maner with the obtanied results of wiring harness through engine part

STEP 7:

open a new product file and place it in the flattness module and set the flattness parameters

STEP 8:

copy the bundle segment and place it in the flattness module and flatten it properly and the save this file sperately

STEP 9:

make a 2D diagram for the flattened geometric bundle with bill of material and save it.

RESULT:

wiring harness routing for the given engine with connector is complete.