Project 1

      BACK DOOR Aim: Route the Wiring Harness on given Car body and prepare flatten view drawing in Catia V5 Objective: The objective of this project is to route the wiring harness and prepare flatten view drawing for the tailgate of the car. All types of packaging rules have to be considered while routing the harness…

                                                                    Engine Aim: To route the wiring harness on given Engine and flatten…

Design of backdoor Aim:                         To design back door of car using given outer class 'A' surface.   Introduction:                       A Door is a hinged part which is used for…

INTRODUCTION   The roof of a car or other vehicle is the top part of it, which protects passengers or goods from the weather. The roof also protects the passenger from any injury when the car gets crashed or is rolled over or something heavy falls on the roof.    OBJECTIVE  …

INTRODUCTION : Design of any product starts from an requirement . The design engineer sketches the product based on the the requirement . Then the 2D sketch  with the proper dimensions is converted into the 3D model using the advanced CAD software's . The another important thing in the design is that , every product…

    FENDER WHEEL ARCH CHALLENGE     INTRODUCTION                           The wheel arch area of the fender is usually designed as a cover or shield over the tyre along its perimeter to stop any debris or stones ,dirt,sand,snow,etc,from getting thrown into the vehicle or the BIW area as well as outside the vehicle and…

Section modulus:  A geometric property for a given cross-section used in the design of beams or flexural members. Other geometric properties used in design include area for tension and shear, radius of gyration or compression, and second moment of area and polar second moment of area for stiffness. Any relationship…

BENCH MARKING:           Bench marking in automobile industry involves a structured compasion between similar products, services or processes on some dimensions of performance.There are four main types of benchmarking: internal, external, performance, and practice. For example, benchmarks…