FEA Modeling of a Plastic container in Hypermesh.

Objective: To model the given geometry of a plastic container using 2d shell elements in Hypermesh.

Quality criteria:

S.N	Quality Criteria	Value
1	Target Element Length	5
2	Aspect Ratio	3
3	Skewness	45
4	Warping	30
5	Taper	0.5
6	Min. Length	3mm
7	Max. Length	7mm
8	Min angle Quad	45
9	Max angle Quad	135
10	Min angle Tria	30
11	Max angle Tria	110
12	Tria %	15

Procedure:

1. Import the given geometry of the plastic container in Hypermesh.
2. Delete the solids in the geometry. Check for topological errors such as missing or distorted faces. The imported geometry was clean and thus where was no need for topology clean-up.
3. The component is a plastic container with a number of ribs of varying thicknesses. Generate the mid-surface for the geometry by a suitable method. Manual mid-surface was used for mid-surface extraction.
4. The mid-surfaces generated were assigned their respective thickness by defining properties with correct thickness and then assigning these properties to the corresponding mid-surface component.
5. The quality criteria were defined by pressing F10 on the keyboard and editing the settings.
6. Now we have to mesh the Mid-surface generated. The automesh tool was used for this purpose. The target element length was set as 5 mm and the mid-surfaces were modeled using quad and tria elements.
7. Tria elements were avoided as far as possible. The mesh was cleaned for good quality. The element connectivity is also checked.
8. To visualize the mesh with thickness, turn on the detailed 2d element representation option.

Result:

1. The plastic container was modeled.
2. The correct thicknesses were applied.

Learning Outcome:

1. Midsurface generation for a component having a variable thickness.
2. Assigning variable thickness to all the generated mid-surfaces.

Find the completed file by clicking here