Creation of geometries by Coordinate system methods using AutoCad

Name: Zaid Ghanem

Date: 24/3/2022

Course Name: AutoCAD Essentials for Civil Engineers

Answers for Challenge No.1

Introduction& Aim

The purpose of this report is to Create the geometries from P1 to P2 using all the coordinates system methods.

Task

Create the geometries from P1 to P2 using all the coordinates system methods. You need to use the Line tool to create the geometries. Where required you need to use the circle tool.

Please read the drawings and find out the missing dimensions before working on the sketches.

Note: Use the Imperial Template and the Decimal Units to draft the features. Dimensions are there for references.

Procedure

• From start menu open AutoCAD
• Choose Start New Drawing
• Choose Advanced Options
• From Advanced options choose imperial template and decimal units
• Start drawing P1 by using line command or by choosing line from home panel
• Choose X Line vertical to create the 10x10 grid which will be used to draw P1 and P2
• After the drawing, choose linear dimensions and check the dimensions of the drawing
• After that plot PDF to plot your Drawing

Results

P1

Attached

P2

Attached