Creating Kitchen layout, Hatching of Architectural elements and sectional view of an Industrial Building in AutoCad

AIM : To create the layouts of the Kitchen and provide hatches pattern as shown. Also, use blocks wherever required. Provide appropriate dimensions in the plan. Assume the size of doors, appliances and others as per the standards.

PROCEDURE : THE FOLLOWING GENERAL COMMANDS WERE USED FOR MAKING THE LAYOUTS - CO, X, L, XL, B, TRIM, M, H, ETC. USING OTHER ASSIGNMENTS REFERENCES.

RESULT : THE ABOVE RESULTS WERE OBTAINED.

2. AIM : To create the elevation of the plan created in the Challenges 7 and apply proper hatch in the walls, doors, windows, and other architectural elements. Refer to the dimensions in Plans and sections in Challenges 7.

PROCEDURE : THE FOLLOWING GENERAL COMMANDS WERE USED FOR MAKING THE LAYOUTS - CO, X, L, XL, B, TRIM, M, H, ETC. USING OTHER ASSIGNMENTS REFERENCES.

RESULT : THE ABOVE RESULTS WERE OBTAINED.

3. AIM : TO CREATE THE SECTION VIEW OF AN INDUSTRIAL BUILDING AS SHOWN IN THE FIGURE. PROVIDE APPROPRIATE HATCHES AND DIMENSIONS WHEREVER REQUIRED. ALSO, PROVIDE ANNOTATIONS TO THE DRAWINGS.

PROCEDURE : THE FOLLOWING GENERAL COMMANDS WERE USED FOR MAKING THE LAYOUTS - CO, X, L, XL, B, TRIM, M, H, ETC. USING OTHER ASSIGNMENTS REFERENCES.

RESULT : THE ABOVE RESULTS WERE OBTAINED.