CREATE A RCHICTUCTURAL AND STRUCTURAL MODEL WITH 3D RENDERING USING REVIT :
QUESTION : 1
Select the type of structure you want to build from one of the three below: a Multi-Unit Residential Apartment b. Office Buildings c. School
ANSWER :
for the project i have selected multi- unit residential apartment
QUESTION : 2
Assume reasonable assumptions for geographic and location details for your project modeling. Based on assumptions and type of structure selected identify the modeling requirements from NBC
ANSWER :
My building is constructed in plan area or flat area
location :
the building is constructed in commercial area , PAROLA MAHARASHTRA , INDIA
QUESTION : 3
Using the structural model, include the following components based on the type of structure selected a. Foundation – Isolated / Wall/Matt Foundation b. Columns c. Beams Connected to Columns d. Roof Framing/ Truss e. Floor / Decks f. Floor Openings for Elevators and Stairs
ANSWER :
AIM :
TO DRAW THE STRUCTURAL MODEL OF MULTI STORY APPERTMENT
PROCEDURE :
STEP 1
start the revit 2023 software by double click on them
then homepage of revit is open as shown below
STEP 2
then click on NEW option from that homepage
then new dialogbox is open
from that dialog box click on dropdown
selct the templet as ARCHICTURAL TEMPLET
as shown below
then click on OK
STEP 3
then go to the file tab
click on save the project
give the file name as STRUCTURAL MULTI STORY APPERTMENT
Ans save it
STEP 4
go to the MANAGE TAB
fromthat manage tab click on project information and fill then information as shown below
STEP 5
from archictural tab
click on datam tab
click on level
and mark the level as shown below
STEP 5
go to the properties broswer
go to the structural plan
from that click on FOUNDATION PLAN
then go to the datam option
from that click on grid option
and mark the grid
and rename it as horizontal grip as A,B,C etc AND Vertical grid as 1,2,3,4 ETC as shown below
STEP 6
go to the structural tab
click on ISOLATED FOOTING
footing size-1800x1200x450
then go to the load family
double click on structure
and load the cap as shwn below
then click on ON GRID option
select the grid
and click on finished
then same way go for cloumn
go to the structural tab
select the archictural column
column size 600x600
click on on grid option
and mark a column
select the base level as FOUNDATION LEVEL
and top level as FOURTH LEVEL
click on apply
STEP 7
go to the properties broswer
click on GROUND FLOOR LEVEL
then go to the structural tab
click on beam option
select the comcrete beam having size is 600x600
mark the beam as shown below
by using same procedure provide the beam in all floor
RESULTS :
QUESTION : 4
Using the architectural model, include the following components based on the type of structure selected a. Wall Layout with appropriate material and finishing b. Exterior façade with fancy finish c. Interior partition walls to size rooms d. Components to add details to a room ( Desk, Chair, Lighting, Plumbing fixtures) e. Add components such as stairs Elevators f. Have at-least one side of the building with curtain walls and glass panels g. Include interior and exterior lighting fixtures h. Place proper topographic components from outside ( Trees, Parking, Plants) to add details to the model
ANSWER :
AIM :
TO DRAW THE ARCHICTURAL MODEL OF MULTI STORY APPERTMENT
PROCEDURE :
STEP 1
go to the properties broswer
click on ground floor level
then go to the archicture tab
click on wall
select the wall
click on duplicate
rename it as BASIC 9" WALL as shown below
click ok and mark the wall
then go to the properties broswer
give the base level as ground floor level
and top level as forth floor leve
and click on appy
in this way provide all walles to the flat
WINDOW AND DOOR
then click on archictural tab
click on door
then go to the load faimy
select the door
and placed it as shown in floor plan
then same way provide the window
3d view of door and window shown below
3D view of doors and window :
provide floor :
go to the ground floor plan
then go to the archictural tab
click on floor option
then select the line option to draw the floor
as shown below
and mark the floor
then selct the floor
and copy it
click on past option
selct level where we have to provide the floor
and past it
then go to the ground floor plan
go to the insert tab
click on load family
and insert it as shown below
ground floor plan shown below
select the all inserted element
click on copy
then click on past option
slect the level and past it
KITCHEN :
LIVING ROOM :
BED ROOM :
TOILET AND BATH :
BALCONEY :
go to the properties broswer
click on ground floor plan
then go to the archictural tab
click on floor opton
selct the rectangle option to draw the floor
and then click on finshed
then select the floor
and copy it
then click on past option
select the anighed to level
selct the level where balconey we want
and past it
then click provide the relling to the balconey
3D VIEW OF BALCONEY :
STAIRCASE
go to the properties brower
click on foundation
then go to the archicture tab
click on stair option
selct the U shape staircase
and place the stair
then select the stair
give the base constent as foundation level
and top constant as fouth level
then click on apply
then provide the opening for staircase
then again go to the archictural tab
click on shaft
selct the rectangle option for provide the opening
give the base level as ground floor level
and top level is fourth floor level
click on apply
3D VIEW OF STAIRCASE :
RESULTS :
QUESTION : 5
) Provide a set of drawings in an architectural and structural model to list the following details with categories and appropriate sheet templates included a. Floor Plans with Annotations b. Elevations c. Sections
ANSWER :
PROCEDURE :
STEP 1
start the revit 2023 software
then homepage of revit is open as shown below
STEP 2
then click on OPEN option from the homepage
then selct the file and open it
then go to the properties broswer
click on ground floor plan
then go to the view tab
click on section
thne provide the section line as shown below
then go to the properties broswer
click on section view
SECTION VIEW1 :
SECTION VIEW 2 :
STEP 3
then go to the insert tab
click on load family
then click on titlebox
select the requried sheet
thne click on open
go to the properties broswer
then click on sheet
Then go to the properties broswer
go to the site plan
drag it and place it into the sheet with proper scale shown below
SITE PLAN :
In this way placed all views in sheet shown below
SECTION VIEW :
EAST AND NORTH VIEW :
SOUTH AND WEST VIEW :
QUESTION : 6
Using the Rendering settings, Render images of the 3D model produced and include the rendered images to the drawing sheets a. Rendering from interior rooms b. Rendering from out showing topographic features c. Rendering through structural framing
ANSWER :
PROCEDURE :
STEP 1
Start the revit software
then homepage of revit is open as shown below
STEP 2
then click on OPEN option from that homepage
select the file and open it
STEP 3
For render go to the view tab click on render
do proper setting shown below
Then do to same setting for all view
and render the it
and save the image
STEP 4
then go to insert tab
click load family
then click on titleblocks
select the sheet
and open it
then go to the properties broswer
click on sheet
then right click on sheet
and rename it
then go to the properties broswer
go to the rendering
drag the image and placed it into the sheet with proper scale shown in results
RESULTS :
KITCHEN
LIVIGN ROOM :
BED ROOM :
BATH :
STAIRCASE
FRIENT VIEW :
QUESTION 7 :
Print the set of drawing sheets created and submit the drawings from the architecture and structure model
