BlogFor BusinessTalk to a counsellor
CoursesIIT ProgramsPlacementsLog in
BlogFor Business
Talk to a counsellor
Challenge

Creating a Floor plan, Footing detail and Isometric view using AutoCad

PPrachit Milmile12 Jan 2022

AIM: To sktech the drawing in Auto-CAD

Procedure:

Command: _line
Specify first point:
Specify next point or [Undo]: 0.9
Specify next point or [Undo]: 0.25
Specify next point or [Close/Undo]: 0.9
Specify next point or [Close/Undo]: 0.25
Command: _line
Specify first point:
Specify next point or [Undo]: 0.2
Specify next point or [Undo]: 0.4
Specify next point or [Close/Undo]: 0.5
Specify next point or [Close/Undo]: 0.4
Specify next point or [Close/Undo]: *Cancel*
Command: _line
Specify first point:
Specify next point or [Undo]: 0.25
Specify first point:
Specify next point or [Undo]: 0.05
Specify next point or [Undo]: 0.40
Specify next point or [Close/Undo]: 0.40
Specify next point or [Close/Undo]: 0.40
Specify next point or [Close/Undo]: *Cancel*
Command: _trim
Current settings: Projection=UCS, Edge=None, Mode=Quick
Command: _line
Specify first point:
Specify next point or [Undo]: 0.05
Specify next point or [Undo]: 0.60
Specify next point or [Close/Undo]: 0.3
Specify next point or [Close/Undo]: 0.6
Specify next point or [Close/Undo]: *Cancel*
command: _line
Specify first point:
Specify next point or [Undo]: 0.05
Specify next point or [Undo]: 0.3
Specify next point or [Close/Undo]: 0.05
Specify next point or [Close/Undo]: *Cancel*
Command: _line
Specify first point:
Specify next point or [Undo]: 1
Specify next point or [Undo]: 0.3
Specify next point or [Close/Undo]: 1
Command: _line
Specify first point:
Specify next point or [Undo]: 1.15
Specify first point:
Specify next point or [Undo]: 0.15
Specify next point or [Undo]: 1.15
Specify next point or [Close/Undo]: 0.15
Specify next point or [Close/Undo]: 0.3
Specify next point or [Close/Undo]: 0.15
Specify next point or [Close/Undo]: 0.3
Specify next point or [Close/Undo]: 0.15
Specify next point or [Close/Undo]: 0.3
Specify next point or [Close/Undo]: 0.15
Specify next point or [Close/Undo]: 0.30

Result:

                               C.S. OF LOAD BEARING WALL OVER SPREAD FOOTING

AIM: To sktech the drawing in Auto-CAD

Procedure:

Command: _line
Specify first point:
Specify next point or [Undo]: 1
Specify next point or [Undo]: 0.15
Specify next point or [Close/Undo]: 0.25
Specify next point or [Close/Undo]: 0.38
Specify next point or [Undo]: 0.5
Command: _line
Specify first point:
Specify next point or [Undo]: 0.04
Specify next point or [Undo]: 0.04
Specify next point or [Close/Undo]: 0.38
Specify next point or [Close/Undo]: 0.15
Specify next point or [Undo]: 0.04
Specify next point or [Undo]: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 0.20
Specify next point or [Undo]: *Cancel*
Select objects: Specify opposite corner: 4 found
Command: _line
Specify next point or [Undo]: 1.60
Command: COPY
Current settings: Copy mode = Multiple
Specify base point or [Displacement/mOde] :
Specify second point or [Array] :
Specify second point or [Array/Exit/Undo] :
Specify second point or [Array/Exit/Undo] :
Specify second point or [Array/Exit/Undo] :
Specify second point or [Array/Exit/Undo] :
Specify second point or [Array/Exit/Undo] :
Specify second point or [Array/Exit/Undo] :
Specify second point or [Array/Exit/Undo] :
Specify second point or [Array/Exit/Undo] : *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 1.60

Result:

                                  C.S.ISOLATE FOOTING

AIM: TO DRAW LINE DIAGRAM OF TWO BEDROOM BUILDING

Procedure:

Command: _rectang
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:
Specify other corner point or [Area/Dimensions/Rotation]: @3.6,3.6
Command: _rectang
Specify other corner point or [Area/Dimensions/Rotation]: @4.2,3.6
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 0.3
Specify next point or [Undo]: 1
Specify next point or [Close/Undo]: 0.3
Command: CO
COPY 3 found
Current settings: Copy mode = Multiple
Specify base point or [Displacement/mOde] :
Specify second point or [Array] :
Specify second point or [Array/Exit/Undo] : *Cancel*
Command: CO
COPY
Select objects: 1 found
Select objects: 1 found, 2 total
Select objects: 1 found, 3 total
Select objects: 1 found, 4 total
Select objects:
Current settings: Copy mode = Multiple
Specify base point or [Displacement/mOde] :
Specify second point or [Array] :
Specify second point or [Array/Exit/Undo] :
Specify second point or [Array/Exit/Undo] :
Specify second point or [Array/Exit/Undo] : *Cancel*
Command: _line
Specify first point:
Specify next point or [Undo]: 1.80
Specify next point or [Undo]: *Cancel*
Command: _line
Specify first point:
Specify next point or [Undo]: 0.90
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _trim' 
Command: _mtext
Current text style: "Standard" Text height: 0.2000 Annotative: No
Specify first corner:
Specify opposite corner or [Height/Justify/Line spacing/Rotation/Style/Width/Columns]:
Command:
Command:
Command: _mtext
Current text style: "Standard" Text height: 0.2000 Annotative: No
Specify first corner:
Specify opposite corner or [Height/Justify/Line spacing/Rotation/Style/Width/Columns]:
Command: _mtedit
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _dim
Select objects or specify first extension line origin or [Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Specify first extension line origin or [Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Specify second extension line origin or [Undo]:
Specify dimension line location or second line for angle [Mtext/Text/text aNgle/Undo]:
Select objects or specify first extension line origin or [Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Select objects or specify first extension line origin or [Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Command:
Command: _dim
Select objects or specify first extension line origin or [Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Specify first extension line origin or [Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Specify second extension line origin or [Undo]:
Specify dimension line location or second line for angle [Mtext/Text/text aNgle/Undo]:
Select objects or specify first extension line origin or [Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Select extension line origin as baseline or [Continue]:
Select objects or specify first extension line origin or [Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:

Result:

AIM: C.S OF LOAD BEARING WALL SHOWING FOUNDATION DETAILS

Procedure:

Command: _line
Specify first point:
Specify next point or [Undo]: 0.90
Specify next point or [Undo]: 0.45
Specify next point or [Close/Undo]: 0.15
Specify next point or [Close/Undo]: 0.40
Specify next point or [Close/Undo]: 0.05
Specify next point or [Close/Undo]: 0.30
Specify next point or [Close/Undo]: 0.05
Specify next point or [Close/Undo]: 0.60
Specify next point or [Close/Undo]: 0.05
Specify next point or [Close/Undo]: 0.60
Specify next point or [Close/Undo]: 0.05
Specify next point or [Close/Undo]: 1
Specify next point or [Close/Undo]: 0.3
Specify next point or [Close/Undo]: *Cancel*
Command: LINE
Specify first point:
Specify next point or [Undo]: 0.15
Specify next point or [Undo]: *Cancel*
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
Command:
Command: _mirror 14 found
Specify first point of mirror line:
Specify second point of mirror line:
Erase source objects? [Yes/No] : *Cancel*
Command:
Command:
Command: _mirror
Select objects: Specify opposite corner: 14 found
Select objects:
Specify first point of mirror line:
Specify second point of mirror line:
Erase source objects? [Yes/No] : *Cancel*
Command:
Command:
Command: _mirror
Select objects: Specify opposite corner: 14 found
Select objects:
Specify first point of mirror line:
Invalid 2D point.
Specify first point of mirror line:
Specify second point of mirror line:
Erase source objects? [Yes/No] : *Cancel*
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
Command:
Command: _mirror 14 found
Specify first point of mirror line:
Specify second point of mirror line:
Erase source objects? [Yes/No] : N
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _dim
Select objects or specify first extension line origin or [Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Specify first extension line origin or [Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Specify second extension line origin or [Undo]:
Specify dimension line location or second line for angle [Mtext/Text/text aNgle/Undo]:
Select objects or specify first extension line origin or [Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Select objects or specify first extension line origin or [Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Command:
Command: _dim
Select objects or specify first extension line origin or [Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Command: D DIMSTYLE

Result:

AIM: ISOMETRIC VIEW OF STEPS

Procedure:

Command: _.ISODRAFT
Enter an option [Orthographic/isoplane Left/isoplane Top/isoplane Right] :_Top
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 1
Specify next point or [Undo]: 0.15
Specify next point or [Close/Undo]: 1
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command: _.ISODRAFT
Enter an option [Orthographic/isoplane Left/isoplane Top/isoplane Right] :_Orthographic
Command: _.ISODRAFT
Enter an option [Orthographic/isoplane Left/isoplane Top/isoplane Right] :_Left
Command:
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 0.30
Specify next point or [Undo]: 1
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command: _.ISODRAFT
Enter an option [Orthographic/isoplane Left/isoplane Top/isoplane Right] :_Orthographic
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: COPY
7 found
Current settings: Copy mode = Multiple
Specify base point or [Displacement/mOde] :
Specify second point or [Array] :
Specify second point or [Array/Exit/Undo] :
Specify second point or [Array/Exit/Undo] :
Specify second point or [Array/Exit/Undo] :
Specify second point or [Array/Exit/Undo] : *Cancel*
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: _.ISODRAFT
Point or option keyword required.
Specify next point or [Undo]: _Right
Point or option keyword required.
Specify next point or [Undo]: _.ISODRAFT
Point or option keyword required.
Specify next point or [Undo]: _Right
Point or option keyword required.
Specify next point or [Undo]: _.ISODRAFT
Point or option keyword required.
Specify next point or [Undo]: _Right
Point or option keyword required.
Specify next point or [Undo]: _.ISODRAFT
Point or option keyword required.
Specify next point or [Undo]: _Right
Point or option keyword required.
Specify next point or [Undo]: _.ISODRAFT
Point or option keyword required.
Specify next point or [Undo]: _Right
Point or option keyword required.
Specify next point or [Undo]: _.ISODRAFT
Point or option keyword required.
Specify next point or [Undo]: _Right
Point or option keyword required.
Specify next point or [Undo]: *Cancel*
Command: _.ISODRAFT
Enter an option [Orthographic/isoplane Left/isoplane Top/isoplane Right] :_Right
Command: _line
Specify first point:
Specify next point or [Undo]: 0.30
Specify next point or [Undo]: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 0.15
Specify next point or [Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command: _mtext
Current text style: "Standard" Text height: 0.2000 Annotative: No

Result:

AIM: ISOMETRIC VIEW OF GABLE WALL

Procedure:

Command: _.ISODRAFT
Enter an option [Orthographic/isoplane Left/isoplane Top/isoplane Right] :_Right
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 1
Specify next point or [Undo]: 2.42
Specify next point or [Close/Undo]: 1
Specify next point or [Close/Undo]: 2.42
Specify next point or [Close/Undo]: 1
Specify next point or [Close/Undo]: 3
Specify next point or [Close/Undo]: 0.25
Specify next point or [Close/Undo]: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 3
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 0.30
Specify next point or [Undo]: 3
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 0.30
Specify next point or [Undo]: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 0.30
Specify next point or [Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command:
Command:
Command: _trim
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase/Undo]: *Cancel*
Command:
Command:
Command:
Command: _line
Specify first point:
Specify next point or [Undo]: 0.5
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command:
Command: _line
Specify first point: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]: *Cancel*
Command:
Command:
Command: _dim
Select objects or specify first extension line origin or [Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Select objects or specify first extension line origin or [Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Specify second extension line origin or [Undo]:
Command:
Command:
Command: _dim
Select objects or specify first extension line origin or [Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Specify first extension line origin or [Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Specify second extension line origin or [Undo]:
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 3.25
Specify next point or [Undo]: *Cancel*
Command:
Command: _.erase 1 found
Command:
Command: _.erase 1 found
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command: _.erase 1 found
Command:
Command: _.erase 1 found
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 3.5
Specify next point or [Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command:
Command: _.erase 1 found
Command:
Command: _.erase 1 found
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 3.75
Specify next point or [Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command:
Command: _.erase 1 found
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 0.3
Specify next point or [Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 0.30
Specify next point or [Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command: _.erase 1 found
Command:
Command:
Command: _dim
Select objects or specify first extension line origin or [Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Specify first extension line origin or [Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Specify second extension line origin or [Undo]:
Specify dimension line location or second line for angle [Mtext/Text/text aNgle/Undo]:
Command:
Command:
Command: _dim
Select objects or specify first extension line origin or [Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Specify first extension line origin or [Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Specify second extension line origin or [Undo]:
Specify dimension line location or second line for angle [Mtext/Text/text aNgle/Undo]:
Command: _.ISODRAFT
Enter an option [Orthographic/isoplane Left/isoplane Top/isoplane Right] :_Orthographic

 Result:

Your portfolio, next

Ship work like this
in your own course.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.