Challenge 12 : Rendering Project

Tooling Direction is the direction in which the die will be moving. The core will move apart from the cavity according to the tooling direction. The below image shows the draft analysis having 10 deg draft in tooling direction. The parting line is line which seperate the core and cavity. That is, when casting there will…

DESIGN OF CAR’S ROOF OBJECTIVE: The main objective of this project is to design the flanges and reinforcements required for the roof of a car and also justify the position of these reinforcements. THEORY: We should keep in mind some points while designing a roof. Curved roof is always stronger than flat roof. The…

FENDER DESIGN AIM Our main aim is to design the fender along with the mounting regions, Drip area, A-pillar mount area, Sill mount area, body mount area, cowl mount area. Theory  It is a part fixed above the wheel. Its primary function is to protect the engine compartment and the pedestrians from the chippings shoot…

I= 1.43792310 x 10^4 mm^4 y= 880.05888791806 mm S= I/y   = 1.43792310 x 10^4 /880.05888791806   =16.3389418

HOOD DESIGN USING NX CAD AIM: Our aim is to design a hood outer panel, inner panel and the necessary reinforcements. We have to make this into an assembly file along with striker and latch assembly aligned to the inner panel respectively. Given Data A styling surface of the hood. Master section of the hood panel. Hemming…

UNDERBODY COATING In order to prevent the underbody of an automotive from rusting, a coating is given to the underbody of the automotive. This is called underbody coating. Underbody Coating offers a long term protection for underbody from corrosion and dust. The frame rails, internal body panels and other inner cavities…

BENCHMARKING In automobile industry, benchmarking involves the comparison between similar products, services, processes and other fields. This benchmarking helps in comparing the availability and delivery of features in a product. This helps in getting the basis of consumer tests and reviews. With the help of the result…

PROJECT REPORT SURFACE MODELLING OF ASTON MARTIN ONE-77 USING SOLIDWORKS OBJECTIVE The main objective of this project is to obtain a surface model of Aston Martin One-77 using Solidworks. We have to make different parts and finally assemble them together. INTRODUCTION We are using Solidworks 2016 for the surface modelling…

RENDERING PROJECT OBJECTIVE: The main objective is to submit rendered images of the projects which have been made so far. INTRODUCTION: After making surfaces and separating it into different parts, rendering process starts. Alias provides wide variety of visualization techniques.  RENDERED IMAGES VEYRON ALLOY WHEEL…

PROJECT REPORT TITLE: TECHNICAL SURFACING OF KIA SPORTAGE OBJECTIVE The main objective is to obtain a Class A surface of Kia Sportage INTRODUCTION Different views of the car is given as a reference and these images are used for making the class a surface of the car. DESIGN METHODOLOGY DESCRIPTION For making the surface…

TITLE: CONCEPT MODELING OF SEATS OBJECTIVE: Our objective is to design a concept model of a set entirely through visualisation. INTRODUCTION We are given a perspective view of a seat, This is to improve our visualisation skills while designing a component. In order to understand the full details of a product a 3D…

TITLE: CONCEPT MODELING OF A STEERING WHEEL OBJJECTIVE: The main objective is to design a concept model of a steering wheel of a car. INTRODUCTION For making this concept model we are taking an image of a steering wheel as a reference. DESIGN METHODOLOGY DESCRIPTION After placing the canvas image we have to start drawing…

PROJECT REPORT TITLE: Concept Modeling of Side Fender OBJECTIVE The main objective is to make a CLASS A SURFACE of a side fender of a car using ALIAS. INTRODUCTION We have to make the CLASS A SURFACE of the side fender. For that ALIAS software is used. DESIGN METHODOLOGY The following flowchart shows the design methodology…

PROJECT REPORT TITLE: CONCEPT MODELING OF A CAR BUMPER INTRODUCTION The Bumper of a car is essential part in the car. It plays an important role in protecting the car during a head on collision. Here a concept model of a car bumper is made using Autodesk ALIAS. OBJECTIVE The main objective is to make a concept model of…

PROJECT REPORT TITLE: CONCEPT MODELING OF AN ALLOY WHEEL OBJECTIVE The main objective is to model an alloy wheel. A reference image is taken. INTRODUCTION A reference image of a car wheel is taken. Curves are drawn ith reference to this canvas. DESIGN METHODOLOGY The following flowchart shows a vague idea on how the…

FINAL REPORT OF THE PROJECT DEVELOPMENT OF DOOR TRIM PANEL INTRODUCTION The Project that I did is THE DEVELOPMENT OF A DOOR TRIM PANEL. The software I used  for developing the solid model is CATIA V5. The CAD file includes all the Class A, Class B, Class C surfaces and final trims and also a solid model of all the…

 ANSWER UPLOADED

 ANSWER UPLOADED

ANSWER UPLOADED  

 ANSWERS UPLOADED 

ANSWERS ARE UPLOADED

1. BASE 2. BIG CIRCULAR BUSH 3. RECTANGULAR BUSH 4. CONNECTION B/W BUSHES 5. BUSH HOLES 6. 3D VIEW