Bracket designing using NX Cad
Title:- Bracket designing using NX Cad
Objective:-
To create metal bracket from given 2D drawing
Introduction:-
For creating metal bracket from 2D drawing i have used various tools in NX Cad.
i have used tools such as contour flange, normal cutout, break corner, unbend, rebend, bead
Design methodology:-
- Draw a sketch on XZ dantum plane.
- Use contour flange to create a solid body.
- Use normal cutout to get the desired solid body.
- Use break corner to Blend the sharp edges.
- use unbend
- form a bead on the solid body.
- Use rebend to bring solid body back to desired shape.
- Use Hole to punch a general hole through the solid body.
Description:-
Contour Flange:-
It is created by extending the sketch on its representive axis with the thickness as required from the base.
Normal Cutout:-
It is used to cut or create a gap in the sketch.
Break Corner:-
It is used to make the corners blend with some self dimensioned radius in order to make corners smooth.
Unbend:-
It is used for Unbending corners of the body.
Bead:-
It is used to create a conture shape according to the sketch in the required direction with required punch/die radius.
Rebend:-
It is used for bending corners of the unbend body.
Hole:-
A Hole feature is used to create holes on the model.
Screenshots:-
1) Front View
2) Side View
3) Top View
4) Isometric View
Conclusion:-
Thus we have successfully designed metal bracket using 2D drawing Using NX Cad.
Part link:- https://drive.google.com/open?id=1Z3p4599N7Rb2wXMhXOnCF_cL_rFtwn2F