Assembly of Yacht
Sonu_Assembly
https://drive.google.com/open?id=19Q79zzvqgaG-Bm-SxYiZrR46B8N2zWOw
Yacht Images
https://drive.google.com/open?id=1Y1acnkB-0doH9JJAzKyYyl9qDC7lDXJc
Objective:
The objective of this project is used to create a surface model of different parts of the Yacht using
Solidworks. To assemble the different parts modeled for the Yacht.
Part Modeling:
Part Modeling you can create a part from a conceptual sketch through solid feature-based modeling, as well as build and modify parts through direct and iNtuitive graphical manipulation.
Surface Modeling:
• Surface modeling gives you the ability to build out a visual representation of an object's exterior and its contours. In other words, it's a surface.
• Surface modeling plays a major role in modeling a yacht. Most of the parts in the yacht are surface modeled.
The following are the features used in surface modeling,
Loft Surface
Loft Surfaces are surfaces generated by multiple 3D Curves or existing edges creating a smooth tangency between the selected curves.
Sweep Surfaces
Sweep Surfaces are surfaces that are generated from a section curve positioned along a path.
Filled Surface
The Filled Surface feature constructs a surface patch with any number of sides, within a boundary defined by existing model edges, sketches, or curves, including composite curves.
Surface trim
Primarily used to cut away material from a surface, and provides two modes: Standard and Mutual.
Extend Surface
Extend Surface is used to extend the surface which is already created. There are different options available on the extended surface. We can extend the surface as same surface or we can extend
the surface tangent to the surface.
Surface knit
Surface knit is used to knit the two free edges/open edges of the surfaces together. Also it reduces the gap between the two edges of the surface.
The following parts of the Yacht are modeled in Solidworks and assembled together.
1. Propeller
2. Radar
3. Blue Print
4. Hull
5. Garage Door
6. Front Seat
7. Middle Seat
8. Rear Seat
9. Super Structure
10. Radar Mast
1. Propeller:
A Propeller is a fan mechanism that transmits power by converting rotational motion into thrust. Usually consisting of 3 or more blades.
Features used to create Propeller
• Sketch
• Revolve
• Cut Extrude
• Loft
• Fillet
• Circular Pattern
2. Radar:
Marine radars are X band or S band radars on ships, used to detect other ships and land obstacles.
Features used to create Radar
• Sketch
• Extrude
• Mirror
• Cut Extrude
• Fillet
• Sketch driven pattern
• Extrude cut
3. Hull:
A hull is the watertight body of a ship or boat. The hull may open at the top or it may be fully or partially covered with a deck.
Features used to create Hull
• Sketch
• Project Curve
• Swept Surface
• Loft Surface
• Extruded surface
• Extend Surface
• Surface Knit
• Extrude
• Mirror
• Cut Extrude
• Fillet
• Pattern
• Split
• Shell
4. Garage Door :
Garage door is used to close the garage part in Hull.
Features used to create Garage Door
• Insert
• Shell
• Text
• Split
5. Front Seat :
Front Seat is placed on the front part of
the Hull.
Features used to create Front Seat
• Sketch
• Project Curve
• Swept Surface
• Loft Surface
• Rule Surface
• Extend Surface
• Surface Knit
• Extrude
• Mirror
• Cut Extrude
• Fillet
• Pattern
6. Middle Seat :
Middle seat is placed under the
superstructure.
Features used to create Middle Seat
• Sketch
• Extrude
• Chamber
• Fillet
7. Rear Seat :
Features used to create Rear Seat
• Sketch
• Project Curve
• Swept Surface
• Loft Surface
• Rule Surface
• Extend Surface
• Surface Knit
• Extrude
• Mirror
• Cut Extrude
• Fillet
• Pattern
8. Super Structure :
Superstructure means to add a construction to an already existing structure. In ships this is the name given to the part of the ship that emerges from the deck.
Features used to create Super Structure
• Sketch
• Project Curve
• Swept Surface
• Loft Surface
• Extruded surface
• Extend Surface
• Fill Surface
• Surface Knit
• Surface Trim
• Delete surface
• Extrude
• Mirror
• Cut Extrude
• Fillet
• Pattern
• Split
9. Radar Mast:
Features used to create Radar Mast
• Sketch
• Extrude
• Revolve
• Sweep
• Cut Extrude
• Fillet
Assembly :
• The parts of the Yacht are inserted into the assembly environment.
• The possible mate conditions are given to the yacht and the yacht is assembled.
Rendering:
Rendering of Yacht has done in Solidworks Visualize.
Conclusion :
• The parts of the Yacht are modeled.
• The parts are inserted into the assembly environment and the Yacht is assembled.