Advanced Sheet Metal Design Using NX Cad Challenge_7_ Metal bracket-II
Title : Bracket II Design using Siemens NX
Objective : Bracket II Design using Siemens NX sheet metal interface .
Introduction : Bracket II design using Siemens NX sheet metal user interface , Siemens NX has powerful CAD software design tools which help us to make the design easily .
<!-- [if gte vml 1]> Counter flange has upto 250mm from the
sketch and unbend the surface Create the sketch with length
of 150mm * 90mm length over the
surface then normal cut out the
sketch. After normal
cut out apply the break
corner 5 mm radius Create the sketch 255mm and make the bead circle option with 20mm radius and depth .then
rebend the sheet metal Create
a sketch a along y direction . 185 mm to 55 mm length .
<![endif]>
<![endif]>
<![endif]>
<![endif]>
<![endif]>
<![endif]>
<![endif]>
<![endif]>
<![endif]>
<![endif]>
<!-- [if gte vml 1]> Apply bead command over the surface of the width of 25 mm , with 45 degree angle draft .
<![endif]>
<![endif]>
<!--[endif]-->
Description :
First create a sketch of 150mm lenth and 250 mm wide along y direction and apply the counterflange command on it .
<!-- [if gte vml 1]>
From the sketch of of 50mm * 125mm length to make a straight line surface and apply flange over the surface on it .
<!-- [if gte vml 1]>
After creating a flange we have to create a sketch a hole of 5mm dia with normal cut commans option .
<!-- [if gte vml 1]>
After creating a hole it required to sketch over the below surface of the bracket –and make circular shape hole with normal cut out option .
<!-- [if gte vml 1]>
After that apply bead command with all the four side of flange corner to increase the stiffness with 45 degree angle on it ,
<!-- [if gte vml 1]>
Side view :
<!-- [if gte vml 1]>
Top view :
<!-- [if gte vml 1]>
Isometric view :
<!-- [if gte vml 1]>