Advanced Sheet Metal Design Using NX Cad Challenge_6_Bracket
Title : Bracket Design using Siemens NX
Objective : Bracket Design using Siemens NX sheet metal interface .
Introduction : Bracket design using Siemens NX sheet metal user interface , Siemens NX has powerful CAD software design tools which help us to make the design easily .
<!-- [if gte vml 1]> Counter flange has upto 250mm from the
sketch and unbend the surface Create the sketch with length
of 100mm * 80mm length over the
surface then normal cut out the
sketch. After normal
cut out apply the break
corner 25 mm radius and
60 mm radius Create the sketch 255mm and make the bead circle option with 7mm radius and depth .then
rebend the sheet metal Create a sketch 125 mm line with 20mm height with 25mm radius and mirror y axis
<![endif]>
<![endif]>
<![endif]>
<![endif]>
<![endif]>
<![endif]>
<![endif]>
<![endif]>
<![endif]>
<![endif]>
Description :
First create a sketch 125 mm line with 20mm height with 25mm radius and mirror y axis and counter flange is applied to it .
<!-- [if gte vml 1]>
Then unbend the sheet metal and create a sketch 100mm*80mm in length and with the help of normal cut option it cut down the sketch area.
<!-- [if gte vml 1]>
After that creating break corner radius of 25 mm all the four corner of sheet metal and 60mm radius in bend corner has applied
<!-- [if gte vml 1]>
After applying a break corner create a point over the surface of sheet metal in 3 position apply the hole with 20mm dia . another create a sketch a line over the vertical direction to create a bead circular shape ,after that rebend the sheet metal .
<!-- [if gte vml 1]>
Creating a flat patter and 2d drafting of the sheet metal in drafting work bench .
<!-- [if gte vml 1]>
Top view :
<!-- [if gte vml 1]>
SIDE VIEW :
<!-- [if gte vml 1]>
FRONT VIEW :
<!-- [if gte vml 1]>
ISOMETRIC VIEW :
<!-- [if gte vml 1]>
CONCLUSION :
Bracket Design using Siemens NX sheet metal interface has completed as per considering the all the design parameter .