Ultimate SolidWorks Challenge no 1

Aim - To create various types of connections in the model using various options.   Procedure -  Import the model & move the different parts to various PIDs. Ex - Clips, Railing, Mirror, Body, Hinge, Hinge Supports, etc. Topo/Mesh>Faces/Macros>Set PID> Select the macro areas>OK>Create new PID>OK>OK.…

Aim - To create a 2d mesh for the given hood component.   Procedure - Set the Quality Parameters & Meshing parameters as specified. Latch -  Isolate the latch model Do geometry cleanup, topo & ready the model for creating midsurf Create a midsurf. Topo>Faces>Offset>Select the faces(PID selection)>Thickness>OK…

Aim - To practice & learn the morphing technique in ANSA. Procedure -  SM Practice Model - Import the model & perform the necessary checks, topo cleanup, orientation & geromtery checks & ready the model to perform morphing. Creating Morph box - Morph module>New>Select the entitites/geomteries>Align(Coordinate…

Aim : To mesh the surfaces with 2D elements without any off elements according to criteria. Define a volume mesh using tetra elements for the given model.   Procedure: 1. Import the model 2. Isolate & keep visible only single geomteries for ease of cleanup(Ex- Ball Joint) Cons Resolution - Resolve the geometry…

https://drive.google.com/open?id=1ltOMgejn-SstkYHZiZiIlJ1rOjluS-Gn   Objective: Create 1D elements adhereing to the dof & cross-section conditions.   Procedure: Import the given .igs CAD model using import option. Extract midsurface from the \'Geom\' option. Make any changes if necessary to the extraction…

Please find the files below.   1. Gas Tank : https://drive.google.com/open?id=1CUZqOjK6Za1wyBfYoABhrdg6Sy0S7Uf5   2. Assembly : https://drive.google.com/open?id=1aXFVor88XG4c4AmsTfNjXaya_rQcflxN   3. Zip File containing all files: https://drive.google.com/open?id=1Rfrvh__dhaH9vWYn61bfLfVT-_BlvI7C  …

Please find the files below:   1. Chassis : https://drive.google.com/open?id=1hEbhjgSCTvgMAddwj92GQa7JfzXmPI18   2. Engine : https://drive.google.com/open?id=1I1nawK2xqnRyxcDzcWWiJuoGKzCNk02y   Thanks for the time.

Please find the files below.   1. Rear Wheel - https://drive.google.com/open?id=1yDUuy01qKJyiNSZFE4ovnm06I1ClHYVg   2. Front Fork - https://drive.google.com/open?id=10n0-E1cO3tvmIyhO9PlcaM5ljf0uX_z5   Thanks for the time.

Please find the 2nd challenge files here.   1. Oil Tank - https://drive.google.com/open?id=1DFc-4rKb4SQ1UI5H44jwU0fOnxx6hJF8   2. Pedal - https://drive.google.com/open?id=1EAHZAtaHUGyLbK_xxWWWruAlM4Y-SjM3   3. Chain - https://drive.google.com/open?id=1SdC0lUBO-R33R9cWI4Tm5BolTUx1JS32   Thanks for the…

1. Transmission_Belt_Raghunandan_Huvvina https://drive.google.com/file/d/1QFlOvNTEEJtjbQj6XLWz7MuDmVZaDcYb/view?usp=sharing   2. Kick_Stand_Raghunandan_Huvvina https://drive.google.com/file/d/1nbsRs4dotqOEtsfhrR7EXtyPN3xZrVzu/view?usp=sharing   3. Front_Fender_Raghunandan_Huvvina https://drive.google.com/file/d/1Wjot-L-GKUTAai9pUVrAKCvsgS8N-CVT/view?usp=sharing…