Sunseeker Predator Yacht

The Sunseeker Predator Yacht was modeled by dividing it into 9 different parts, Propeller Radar Hull Garage Door Front Seat Middle Seat Rear Seat Superstructure and  Radar Mast. Front Seat Propeller Radar Mast We used various Solidworks tools like  Surface Extrude Revolved Surface  Boundary Surface Filled…

In this challenge, Photorealistic renderings of the American chopper were made using Solidworks visualize and Photoview 360. The various settings such as, Lighting, Camera Position, Environments, Paint colors, Material types, Shadows etc where modified until the satisfactory results were obtained. ASSEMBLY VIEWS:  …

Gas Tank In this challenge, the Gas Tank of the Chopper was modelled by using the following Solidworks Features, Fillet Mirror Projected Curve Combine Split Line Surface knit Surface loft Cut sweep   Assembly of Chopper In this challenge, all the individual parts, of the American Chopper, designed so far was assembled…

1. Chassis In this challenge, the Chassis of the Chopper was modelled by using the following Solidworks Features, Fillet Extrude Dome Mirror Chamfer Projected Curve Split Combine 2. Engine In this challenge, the Engine of the Chopper was modelled by using the following Solidworks Features, Fillet Extrude Revolved Boss/Base…

1. Chassis In this challenge, the Chassis of the Chopper was modelled by using the following Solidworks Features, Fillet Extrude Dome Mirror Chamfer Projected Curve Split Combine 2. Engine In this challenge, the Engine of the Chopper was modelled by using the following Solidworks Features, Fillet Extrude Revolved Boss/Base…

This challenge, thought the utility of Projected curves feature and Revolved cut feature in Solidworks. 1. Rear Wheel In this challenge, the Rear Wheel of the Chopper was modelled by dividing it into 5 parts, Rim, Disc brake, Caliper, Sprocket and Tire. The various Solidworks Tools used include, Revolve Revolve Cut Extruded…

In this challenge, the Front Spider Webbed Wheel Rims of the Chopper was modelled by dividing it into 4 parts, Rim, Disc brake, Caliper and Tire The various Solidworks Tools used include, Revolve Revolve Cut Extruded Cut Fillet Mirror Linear Pattern Circular Pattern Chamfer

In this challenge, the Oil Tank, Chain and the Pedal of the Chopper were modelled using various Solidworks Tools such as, Combine Linear Pattern Curve Driven Pattern Making and Inserting Blocks Shell   1. Oil Tank The Oil Tank model was created using the following features in Solidworks, Surface Extrude Spline Trim…

This challenge, thought how to create a new customized  Solidworks Template and to create the Transmission belt, Side Stand, Front Fender and the Rear Fender of a Chopper. The tools used in this challenge include, Offset entities Extruded boss base Fillet Smart Dimensions Appearance Dome Dynamic Mirror Entities Split…