Model and upload the yacht

render image                  render file https://drive.google.com/file/d/1VKqN6UDj3TcDE0P6T8o68muiYWHCryy6/view?usp=drivesdk  

To design the Hull. https://drive.google.com/file/d/1WsnaFmfDODdgbHzeyxIsfNcf9lNgdfWl/view?usp=drivesdk   To design the superstructure https://drive.google.com/file/d/1RMWBad1JjzRcEMrvexki1ls5D9GSwqYS/view?usp=drivesdk To design the front seat. https://drive.google.com/file/d/1Q_tUDtzBrB3BKleP7_spiQr_GZegD-x6/view?usp=drivesdk…

to design the gas tank. https://drive.google.com/file/d/1HnP6brual2nYeBg5sjErdsKxu52AWszv/view?usp=drivesdk first we rename the palnes front plane to midplane gas tank, top plane to bottom plane gas tank, and right plane to front plane gas tank. For inserting the image of chopper goto the tools   now we make a sketch…

https://drive.google.com/file/d/1jcaqVoSeU8LaHydUi5V0zKFaPj_HBy9W/view?usp=drivesdk To design the chassis: open a new part file and we rename some planes, front plane to midplane chassis and top plane to bottom plane chasssis. go to tool Now we start a drawing in midplane chasssis. Select the circle and draw two concentric…

to design the front fork https://drive.google.com/file/d/1In9uzbR_fPYEvwyb8NtmKrhQZLG8hd_y/view?usp=drivesdk   to design the rear wheel https://drive.google.com/file/d/16SkUyV6wXoPI_jwRMjZ_AU2BQL1otwZW/view?usp=drivesdk

https://drive.google.com/file/d/1eBWJ_EfqtrSZLIzwhhFi9dkFFMV097RZ/view?usp=drivesdk ans1) To design a oil tank. to desgin a oil tank open a new part file, rename the vertical plan to midpalne plane oil tank and other plane remain same. select the line command and draw a contruction line from center to left of 230mm. take…

Ans 1) To design the transmission belt. open the new file.   select the vertical plane, draw two circle at some distance and now draw a two lines which is  tangent to the circles.Make both circle horigontal to each other. now give dimension, circle have diameter of 140mm and 120mm distance between them is…