FINAL QUIZ

OBJECTIVE   AIM The aim of the challenge is to mesh up the given geometry in the given quality standards.   OBJECTIVE The geometry given is a sheet metal component . The given geometry is of uniform thickness The geometry is divided into 4 parts to mesh The seperated parts are extracted witha mid surface. Then…

AIM IN  this challenge, you will need to perform a parametric study to analyse a frontal impact car crash test. PROCEDURE INitially the model has been imported. The unwanted components are suppresed .  Stainless steel material is assigned. Then size meshing is done of 250mm mesh size and tetrahedrons are used.…

AIM   TO Verify the joints for different materials.   OBJECTIVE To perform static structural analysis on welding joints using three different materials and to compare the results like directional deformation,stress generated on welded joints and strain developed. Model IMPORT   Weld materials Stainless steel…

AIM IN challenge will task you with simulating a bullet penetrating a bucket.   PROCEDURE Open ansys workbench . Then explicit dynamics. Update the material for bullet is tantalium, for bucket aluminium alloy,copper alloy, stainless steel. Update connection as frictionless. Update the mesh and edge sizing for for…

AIM IN  this challenge, you will be performing the tension and torsion test in ANSYS workbench and analyse the results. PROCEDURE Open ansys workbench . Then explicit dynamics. Update the material module as STEEL 1006. Geomtery - import-given model. Model-edit Rename the model. Then to mesh on seperate parts , coordinate…

AIM    IN this challenge you will have to simulate the machining operation with using a planer and observe their behaviour at 2 different velocities. You will have to submit a well formatted report for submission PROCEDURE   Open ansys workbench . Then explicit dynamics. Update the material module as STEEL…

AIM  TO Perform a transient structural analysis on a worm gear assembly. PROCEDURE   Open ansys workbench . Update the material module as STRUCTURAL STEEL. Geomtery - import- WORM GEAR. Model-edit Rename the model. Then create FRICTIONLESS contact btw worm gear and worm shaft. Then create new joints worm shaft…

AIM IN this challenge, you will have to perform a transient structural analysis on a double universal joint with a spring using three different materials   PROCEDURE Open ansys workbench . Update the material module as STRUCTURAL STEEL. Geomtery - import-UNIVERSAL JOINT. Model-edit Rename the model. Then delete…

AIM  TO Perform a Transient Analysis on a Piston and Cam mechanism  PROCEDURE Open ansys workbench . Update the material module as STRUCTURAL . Geomtery - import-LONG PISTON CAM Model-edit Rename the model Flip the contacts. Then add contacts to the cam followr to barrel and cam followeer to barrel cam. INtially…

AIM TO Perform an analysis to simulate the bending of a wire using 3 different types of materials for the wire. PROCEDURE Open ansys workbench . Update the material module as COPPER ALLOY (Nl). Geomtery - import-WIRE BENDING MATERIAL Model-edit Rename the model. Assign copper only to the WIRE  (FRICTIONAL) Then create…

AIM  An Analysis is to be carried out to simulate a sphere pressing on a plate and experiencing plastic deformation on the plate. PROCEDURE Open ansys workbench . Update the material module as STRUCTURAL STEEL(Nl). Geomtery - import-SPHERE PRESSING ON A PLATE Model-edit Rename the model. Assign STRUCTURAL  only…

AIM    TO Simulate the rolling operation on a copper workpiece   PROCEDURE Open ansys workbench . Update the material module as COPPER ALLOY (Nl). Geomtery - import-ROLLING OPERATION In the space claim module edit the model with 60mm height and extrude lenght of 8mm on each side. Model-edit Rename the model.…

AIM TO write a  code to calculate the global maxima of a stalagmite function. STALGAMITE FUNCTION  stalagmite is an upward-growing mound of mineral deposits that have precipitated from water dripping onto the floor of a cave. Most stalagmites have rounded or flattened tips. There are many other types…

AIM To Compare the results obtained by using 3 different materials for gears .   PROCEDURE Open ansys workbench . Update the material module as CAST IRON ( DUCTILE). Geomtery - import -spur gear Model-edit contacts -contact region all faces of both the gears. Type - frictional Beahviour-symmetric Formulation-Augmented…

AIM    To Perform a static structural analysis on a Railwheel and Track setup. This challenge will require the user to dwell deeper into user defined results by ANSYS. CASE 1   Open ansys workbench . Update the material module as structural steel. Geomtery - import - Bevel gear Model-edit Rename the model.…

AIM            To Perform a grid dependency test on Bevel gear assembly   PROCEDURE Open ansys workbench . Update the material module as structural steel. Geomtery - import - Bevel gear Model-edit contacts -contact region all faces of both the gears. Type - frictional Beahviour-symmetric…

AIM  To perform Static structural analysis on a plate with a hole geometry Case 1: Plate with a hole (increased thickness). Case 2: Plate with multiple holes.   Case :1  To Design a plate with a hole with condiotions mentioned below. Plate dimensions: Length=300mmHeight=120mmThickness=30mmCircular Hole…

1. Contents of a starter file include material law,nodal information,properties,elements,information etc.    Contents of a engine file includes post processing entities such as time step for animation , converging timesteps ,max and min limits for animation etc. 2. I solid = 14... HAB looking free 8 node solid…

LINK TO 6TH CHALLENGE   https://drive.google.com/open?id=1cDPDsV-2U4qWiWbBDIZz0rq5DPH5dBRg   LINK TO 7TH CHALLENGE https://drive.google.com/open?id=1lCgIgz7w7GAM2LJPPLOQB-Os3QEzFHlo               AIM To determine various forces acting on a neon frontal crash model To understand…

AIM  To determine various forces acting on a neon frontal crash model To understand the resisatnce offered by various parts in frontal crash.       STAGES OF SIMULATION   INITIAL  Open the model in hypermesjh Change the unit sysytems to KN,KG,MM,MS CREATING INTERFACE Remove the existing interface…

AIM      To compare the base setup simulation results and differant kinematic condition simulation  results.   OBJECTIVE Generate mesh for bumper system with mesh sizw of 6mm and compare base setup with variuos kinematic condition.     NOTE : Plot RWALL forces ,contact forces,internal…

AIM  To Compare 7 cases as discussed in last 3 slides. Objective;         Compare  the 7 cases as discussed in below 3 slides in a tabulated format. Slide 1:         Slide 2:          Slide 3:            …

AIM : The aim of the challenge is to perform simulation on the given model with and without properties and comparing them.   OBJECTIVE :               To compare the simulation results of the base setup and improved shell element properties.   PROCEDURE:   1. Open the \"Element_Formulation_Shell-3_assignment_0001.rad\"…

AIM : The aim is to create  2D and 3D mesh for the given models.     OBJECTIVE : The objective is to check the material properties of the rail component and calculate the speed of sound in steel rail. Calculate the time taken for a stock wave to travel from one end to other rail end.  Edit the engine…

https://drive.google.com/open?id=1PCh3-qGKeGHNcfBEVL-oqx-Nxy6wrMVNAIM: The aim of this challenge si to perform Mesh Cleanup on 2D SHELL Elements.   OBJECTIVE: The objective is to folow the procces mentioned below in the given three models.   Clean the geometry. Extract midsurface. Clean midsurface geometry. Ignore…

     1. https://drive.google.com/open?id=1vgVQHa3a00-inMS-zFMgPM9TlOTQ_pjJ  2. https://drive.google.com/open?id=1Bon9PCQDaHo1uWpaE4rm05HSAFA2FBvU  3. https://drive.google.com/open?id=1dLtgIf03oqzz5FgWwUQJqjRppYXEW6Wu       AIM The aim of the challenge is to 3D  mesh the given…

This drive link will get you to the model. 1. https://drive.google.com/open?id=1_jPQJ4SwUdlry3t2_QSGvHYGU7E1VoTS 2. https://drive.google.com/open?id=1H92l_idV0inOStRDYXnuFyShs79CUQgs     AIM The aim of the challenge is to perform batch mesh to the given component.              …

https://drive.google.com/open?id=1hTnVh-jjU31rRsZBe_8TO54qasY6gDGk This drive will get you through the model.     AIM    The aim of the challernge is to connect the various parts of thr models using connectors.                              …

https://drive.google.com/open?id=193ir109vhihmyTGaljlvf9h2KC2HmRaG The link directes to the model.         AIM The aim of the challenge is to mesh up the given geometry in the given quality standards.   OBJECTIVE The geometry given is a sheet metal component . The given geometry is of uniform thickness…

OBJECTIVE:   The aim is create a 1D element with specified cross section  and DOF.   PROCESS: Initially the hypermesh is opened and the window is displayed in the below figure  Next process is to extract the geometry on which the work needs to be done The user profile on which we are…