F.E.A Of Plate With Holes
Abstract: In this study we will we will do finite element analysis in two plots. First plate which consist only one hole and second plate consist three holes. Then we will find the result of stress, strain and displacement.
Introduction: There are two plates on which we are doing study .The figure with dimension is given below:
plate 1
plate 2
Material: Alloy steel
Force: 1000N
Methodology: .Choose simulation module in SOLIDWORKS interface then click on new study option in study advicer.
2.choose’ Static’ study.
3.Apply Alloy steel material.Then click on external load option in left side interface window,choose side surface of plate on small side plane for applying the load and put 1000N force on that surface.
4.Press the right click of mouse on Fixture option,then choose fixed geometry option and then select the other side faces parallel to loading face plane of plate.
5.Press the right click of mouse on mesh option and select ‘mesh and run ‘option. By this option automatically default mesh will create with results.
Simulation:
Single hole plate
Three hole plate:
Result and Discussion:
single hole plate:
The Stress generation is 1.19e+006 N/M^2. The strain generation is 4.2002e-006.The Displacement in plate is 5.237e-004mm.
Three hole plate:
The Stress generation is 1.156e+006 N/M^2. The strain generation is 4.149e-006.The Displacement in plate is 5.659e-004mm.
The high stress is generated at corner sides of hole. Because due to presence of hole or any type of irregularities stress concentration formed[1].
Refrence: