Different type of pin unit are used in fixture For locating car panel

Q.1) what are the Drawing templates? Ans: Drawing templates are the files of frames and title block which convey the design information that are used to generate 2 D drawing from 3 D part. Neat and detailed Drawing templates convey more information from designer to manufacturer. so we can avoid misunderstanding…

Aim: 1. Design all the other remaining Units required for this Fixture assembly 2. Perform 3D finish and create Rough locators for the Assembly design created for the challenge on week 7.   Design some remaining/needed units for fixture assembly 1) Rough locators A rough locator is a part designed…

Q.1 While finishing the design the nominality of holes is checked which ensures the easy assembly of all the units. The hole concentricity & holes sizes are checked which ensures the easy assembly of different parts. The gaps between the different units are checked to ensure the proper individual working of different…

Ans: Q.1)A base unit is the unit designed to mount all the other units(Clamp unit, Pin unit, rest unit etc.) of the tool, also other parts necessary for a tool like pneumatic valve box, trunking cable path will also be mounted on to a base unit.   Base unit is the fundamental component of the fixture because all other…

Introduction: Clamp unit is a unit designed to clamp or hold the car panel with help of NC block/ mylar/ rest by using pneumatic clamp cylinder. mostly indian OEM used this type of clamp unit (swivel type clamp) in there fixtures.     Typical parts of Clevis clamp unit: 1]Clamp cylinder In clevis clamp unit,…

Design Two different Types of Fixed Pin Unit and Rectractable Pin Unit  Introdcuction: This unit to used for locating car panel using pin. It restrict Degree of fredom of component. Fixed pin unit consist of locating pin, pin retainer, shims, block, blade or adapter plate, riser, locating pint is critical unit so…