BOUNDARY CONDITIONS

Objective: Write a Matlab program that takes an angle as input and generates a blockMesh file for the given angle 10,25,45 degree.  To compare the above results and discuss findings     Calculation  and Assumption Reynolds Number: 2100 Radius of pipe (r) :0.005 dynamics viscosity of water: 1.002 X 10^-3…

    Objective: To write a program in Matlab that can generate the computational mesh automatically for any wedge angle and grading schemes  To show that the velocity profile matches with the Hagen Poiseuille\'s equation For a baseline mesh To show that the velocity profile is fully developed Post process…

    The main objective is to use the icoFOAM solver to simulate the flow through a backward facing step. Initially, The geometry is generated for a variation of the incompressible cavity flow problem in OpenFOAM.The mesh is generated according to the need of the structure|(i.e with or without grading).  …

   The objective in this project is to write code to solve the 1D supersonic nozzle flow equations using the Macormack Method. The governing equations for both conservative and nonconservative are solved and compared. Also, the iteration number and computational time are compared until the final…

    RESULT: steady-state analysis  The 2D heat conduction equation by using the point iterative techniques are implemented for  the following methods 1. Jacobi 2. Gauss-seidel 3. Successive over-relaxation where absolute error criteria are 1e-4 Derivation of the different Numerical scheme…

1. A=[1,2,3,4,5] From the above command, we know that all the elements are separated from each other by commas and are enclosed in square bracket, it is called as Row vector .when the above-given row vector is executed in command window then it shows  A=       1  2 3 4  2. B=[1;2;3;4;5]…

-------------------------------------------------------------------------------------------------------- 1. Kinematic viscosity It is defined as the ratio between the dynamic viscosity and density of the fluid. It is denoted by the Greek symbol (v) called \'nu\'. thus mathematically,          …

 --------------------------------------------------------------------------------------------- clear all;close all;clc;% analytical function =(e.^x)*cos(x) % analytical_derivative%f\'\'(x)= (-)*2*(e.^x)*sin(x)x=linspace(pi/3,pi/2,10);for i=1:10 analytical_derivative(i)= (-2)*(exp(x(i)))*(sin(x(i)));end dx=pi/40; e=exp(1);%fourth…

function out = first_order_approximations(x,dx)% analytical_derivative%f\'(x)=(x^3(cos(x)-sin(x)*3*x^2)/x^6 analytical_derivative=((x.^3*cos(x))-(sin(x)*3*x.^2))/(x.^6); %numerical derivatives forward_differincing = (sin(x)*(x+dx)-sin(x)*(x))/dx; out=abs(forward_differincing - analytical_derivative);end  ----------------------------------------------------------------------------------------…

clear all;close all;clc; x=linspace(pi/3,pi/2,10);for i=1:10 analytical_derivative(i)=((x(i)^3.*cos(x(i)))-(sin(x(i)).*3.*x(i).^2))/x(i).^6;end dx=pi/40; %first order approximationforward_differincing =((sin(x+dx)/(x+dx).^3)-(sin(x)/(x).^3))/dx; %second order approximationcentral_differincing =((sin(x+dx)/(x+dx).^3)-(sin(x-dx)/(x-dx).^3))/(2*dx);…

Video: https://drive.google.com/open?id=1RMyRpTzHTM8hzB-sVwddRmpiLW3JoOKQ Code: https://drive.google.com/open?id=1jYxW08JpLZRAKvKOXXA4DoCRZnOsb3EC

https://drive.google.com/open?id=1wYlH9lHTdyS_oZ6stmjuAIPq6jjhRQ9-

1. Kinematic viscosity It is defined as the ratio between the dynamic viscosity and density of the fluid. It is denoted by the Greek symbol (v) called 'nu'. thus mathematically,                       v=(viscosity/Density) The units of the kinematic viscosity is obtained as…

The boundary condition is a set of limitations that define the behavior of unknown functions on the spatial boundary of the domain. A PDE with a boundary condition is also called a boundary value problem.There are three types of boundary conditions, they are Dirichlet Condition It is types of boundary condition…

1. A=[1,2,3,4,5] From the above command, we know that all the elements are separated from each other by commas and are enclosed in square bracket, it is called as Row vector .when the above-given row vector is executed in command window then it shows  A=       1  2 3 4  2. B=[1;2;3;4;5]…

1. A=[1,2,3,4,5] From the above command, we know that all the elements are seperated from each other by commas and are enclosed in square bracket, it is called as Row vector .when the above-given row vector is executed in command window then it shows  A=       1  2 3 4  2. B=[1;2;3;4;5]…